10 modelos etiquetados · Página 1 de 1

#PETG

Descubre modelos 3D etiquetados como PETG y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

HerramientasGratis

Abrazadera funcional de PETG Prusament

QUÉ ES Y PARA QUÉ SIRVE Abrazadera desmontable para sujetar piezas en el taller, realizar pruebas de presión ligera y comprobar el comportamiento del PETG. CONTENIDO Se conserva el paquete original completo de Printables (5 archivos extraídos), además de una geometría principal para el visor cuando el límite técnico lo permite. La galería usa únicamente imágenes de la publicación original. COMPATIBILIDAD Y USO Imprime cada componente apoyado sobre su cara plana; comprueba el ajuste de la rosca antes del montaje. PROCEDENCIA Autor original: Prusament. Fuente: Printables. Modelo: https://www.printables.com/model/758-petg-prusament-clamp. Licencia comprobada: CC0 / Dominio público. Adaptación en Meshopia: ficha en español, clasificación y recomendaciones prudentes; no se atribuye una prueba de impresión personal. AVISO Laminar siempre con el perfil de la propia impresora y comprobar escala, holguras y seguridad antes del uso.

Tecnología: FDM
Material: PETG
Dificultad: Intermedia

RC & MecánicaGratis

Carcasa tubular para variador de coche RC de drift 1:10

Carcasa tubular diseñada para un variador electrónico de un coche de drift a escala 1:10. El autor utiliza PETG y aclara que la pieza mostrada en su fotografía ha sido pulida. No identifica el modelo de variador ni proporciona en el texto una compatibilidad universal, un grado de estanqueidad o una función de refrigeración. Preparación, compatibilidad e impresión Compara las medidas interiores con tu variador y reserva espacio para conectores y cables. Comprueba también que la carcasa no obstruya la ventilación necesaria del equipo. El pulido es un acabado posterior, no una propiedad automática de la impresión. La fuente no especifica capa, relleno ni orientación; prepara una prueba de ajuste antes de instalar la electrónica.

Tecnología: Sin probar
Material: PETG
Dificultad: Sin especificar

RC & MecánicaGratis

RC plane wheel

This is a two-part design for an RC plane wheel. Purpose and practical uses: The model is intended for use as a wheel for RC planes. Included parts: - RC Plane Wheel Part PETG.stl - RC Plane Wheel Part TPU.stl Printing guidance: The author suggests printing the wheel hub using PETG and the tire using TPU, noting that more flexible TPU is preferred.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

RC Car Rear Hub (Model Unknown)

This model is a replacement rear hub designed for an RC car. The author notes that the specific make and model of the vehicle are unknown. Practical uses include replacing a damaged rear hub on an RC car. The author reports that a version printed in PETG has withstood significant bashing and driving. Included files: - Rear Hub RC.stl

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

RC Car Body Post Cushion

RC Car Body Post Cushion Purpose This model is an RC car body post cushion designed to support a polycarbonate body once it is mounted on posts. It serves as an alternative to using traditional body clips combined with pieces of foam. Practical Uses These cushions are intended to rest the polycarbonate body on the mounting posts. While the design lacks a small curve at the top, the author suggests this can be achieved by applying heat to prints made from PLA or PETG to create a permanent curve. Included Parts - RC car body post cushion (STL file) Printing and Assembly Guidance The author recommends using TPU as the best material for this part. Successful print tests were conducted using the following settings: - Fiberlogy MattFlex 40D TPU: 4 walls and 100% infill. - PETG: 4 walls and 100% infill. - PLA+: The author notes that PLA+ should also work for this application.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR - Suspension Spring Holder

Purpose This model serves as a replacement for the original bottom spring holder located in the suspension of the ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR. Practical Uses It is intended to replace worn or damaged suspension components on the specified ABSIMA truck model. Included Parts - Stossdaempfer-Teller-Dämperteller.stl Printing/Assembly Guidance The author suggests printing this part in PETG for increased durability. Using supports on the build plate was noted to work best.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Orange Lap RC Transponder Holder For Losi 22 Sprint

Orange Lap RC Transponder Holder For Losi 22 Sprint Purpose This model is designed to mount a Trackmate compatible transponder from Orange Lap RC onto a Team Losi 22 Sprint RC car. Practical Uses This holder is compatible with both winged and wingless configurations of the 22 Sprint. It mounts directly to the servo using longer screws in the stock location. Included Parts - Transponder Holder v11.3mf Printing and Assembly Guidance The author reports printing these parts from PETG for additional durability. Assembly requires using longer screws in the stock servo location and a short M3 screw to secure the transponder to the holder.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

HerramientasGratis

CR10 MAX CR touch bracket spacer

This model is a spacer designed to facilitate the installation of a CR Touch sensor when upgrading from a BL Touch sensor on a CR10 MAX. Because the CR Touch sensor is taller than the original BL Touch, this spacer allows for compatibility when the original bracket is flipped upside down, avoiding the need for a completely new bracket. Practical uses include upgrading existing CR10 MAX hardware from BL Touch to CR Touch sensors. Included parts: - cr 10 max bracket.stl Printing and assembly guidance: Printing time is approximately 20 minutes. The author recommends printing this part out of PETG due to its proximity to the hot end. To install, the original bracket must be flipped upside down and this spacer added to accommodate the height of the CR Touch sensor.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

CocinaGratis

ACS - AC Sparta Praha (2021) Coaster

ACS - podtácek AC Sparta Praha (2021) Purpose This model is a coaster featuring the AC Sparta Praha logo used since 2021. Practical Uses It is designed for use as a coaster. For optimal results, the user should scale the model to a diameter of 90 mm (width). When scaled to a 90 mm diameter, the height of the coaster is approximately 3 mm. Included Parts - Podtácek ACS-Body.obj - Podtácek ACS.FCStd - Upravený ACS-Body.obj Printing and Assembly Guidance The model was originally printed using Prusament PETG with a layer height of 0.15 mm (quality setting). To achieve a "two-color" effect, the slicer settings should be configured to include a filament change during the printing process.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

FrSky Taranis Q X7 Travel Case

FrSky Taranis Q X7 Travel Case Purpose This model is a travel case designed for the Taranis Q X7 radio, intended for transporting the device to flight locations and for home storage. Practical Uses The case features a locking tab at the bottom and a 25mm wide Velcro strap at the top to secure the lid. It includes loops designed to hold a carrying strap up to 25mm wide. The design provides internal wiggle room to accommodate user-added padding. A specific 'Storage version' is available, which includes a 25mm x ~200mm section intended for a neck strap and charging cable. Included Parts The model files include components for both the standard and storage versions: Top, Bottom, and 'Thingy' components. Printing and Assembly Guidance According to the author, printing the case took approximately 12 hours using 600g of PETG. Assembly requires two M5x15 bolts and the 'Thingy' component to secure the Velcro strap in place.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar