Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#mjx

Descubre modelos 3D etiquetados como mjx y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de MJX Hypergo H16BM 1/16 scale Shock absorber mounting plate

MJX Hypergo H16BM 1/16 scale Shock absorber mounting plate

MJX Hypergo H16BM 1/16 scale Shock absorber mounting plate Purpose This model is a circular plate designed to serve as the mounting point where the spring braces at the bottom of the shock absorber. Practical Uses It is intended for use on the MJX Hypergo H16BM 1/16 scale RC vehicle to support the shock absorber assembly. Included Parts - MJX Hypergo H16BM shock absorber mounting ring.stl Printing/Assembly Guidance The author reports printing this part with PLA+. However, the author suggests that PETG may be a better material choice for this component.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de MJX HYPER GO RC model steering arm and suspensions hooks

MJX HYPER GO RC model steering arm and suspensions hooks

MJX HYPER GO RC model steering arm and suspensions hooks Purpose These hooks are designed specifically as replacement parts for the MJX HYPER GO RX RC car. Practical Uses They serve as replacement steering arm and suspension hooks for the MJX HYPER GO model. Included Parts - MJX HYPER GO steering arm hook - MJX HYPER GO suspension hook Printing and Assembly Guidance The author recommends printing the hooks in a horizontal orientation for best results. Based on the author's reported settings using eSun PETG-CF filament, the following parameters were used: - Infill: 100% with concentric patterns - Speed: 50mm/s constant speed for all printing fields - Temperature: 255°C nozzle / 70°C bed Users may refer to the provided QiDi studio setting screenshots for additional configuration details.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar