4 tagged models · Page 1 of 1

#joystick

Discover 3D models tagged joystick and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

Simple case for Beacon and joysticks for HOVERAir X1 Pro/ProMax

Identified carrying case or holder for the Beacon and the joysticks of the HOVERAir X1 Pro/ProMax. The source aims to keep these accessories together and facilitate their preparation. It does not document protection against impacts, water, or dust, nor does it claim to be suitable for transporting the complete drone. Preparation, compatibility, and printing Check which accessories fit into the housings and check their removal before printing. The fit must hold them without pressing buttons or connectors. No material, layer, or infill is documented. An initial test of the cavities will allow checking tolerances without assuming that all revisions of the accessories share the same dimensions.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

DJI FPV Remote Controller 3 stick protector

DJI FPV Remote Controller 3 stick protector Purpose This model serves as a simple protector for the DJI FPV Remote Controller 3 sticks. Practical Uses It is designed to act as a gimbal lock for the controller's joysticks. Included Parts - DJI Controller 3 gimble lock v3.stl Printing and Assembly Guidance For optimal results, use a 0.4mm nozzle. The author recommends printing the model in either PLA or ABS. Please note that this model requires supports during the printing process.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

ESParto Cyberdeck ESP32 Remote Control

The Esparto is an ESP32-based transmitter designed for controlling robots and buggies via WiFi or Bluetooth. The enclosure features an OLED screen for status indication and debugging, two dual-axis joysticks with integrated buttons, and three additional function buttons. It also includes a switched external-facing USB port to power extra or extended devices and a 10mm grid of 3mm holes for mounting future modules. The design provides easy access to the ESP32 serial port for programming and the buttons on the ESP32 board. Included Parts: - 1x ESP32-WROOM-32D development board - 1x 0.91" I2C OLED screen - 1x Battery charger board (3.3v output) for 18650 cell - 2x Dual-axis joystick modules - 1x Mini rocker switch - 3x Mini momentary push button switches - Various 2.5mm standoffs Recommended Hardware: - 6x 8mm nylon spacers for button mounts (or 6mm with an additional 2mm nut) - 4x 6mm nylon spacers for battery module - 3mm nuts used as spacers for joysticks - Various M3 screws (author used M3x10 throughout) Printing/Assembly Guidance: The author printed this on a Bambu Labs X1 using a 0.2mm layer height throughout, though it can be printed on any machine. An updated OLED screen mount includes sockets for screw shafts to prevent wire interference when fitting the lid.

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

Apex-Link ESP32 Universal RC Controller (Transmitter)

Purpose The Apex-Link is a DIY remote controller designed for low-latency robotics and RC vehicle control, such as quad-spiders, hexapods, or racing rovers. It utilizes the ESP-NOW protocol for control without requiring a WiFi router. Practical Uses This transmitter provides dual-stick precision and real-time telemetry, including signal strength, battery percentage, and mode information via an LCD. It is intended for use as a bridge between a pilot and a machine. Included Parts - ESP32 Dev Board - 2 Analog Joysticks (X/Y axis with click buttons) - 16x2 LCD Display (I2C version recommended) - 1 Rotary Encoder - 1 SPST Toggle Switch - 2S 18650 Battery Pack (7.4V) - 1 DC-DC Buck Converter - 3D Printed Housing Included Files - controller_case_v1.stl - Controller_cover_v1.stl Printing and Assembly Guidance For the shell, use 3-4 perimeters to prevent joystick screw holes from stripping. The main body may require tree supports for the joystick cutouts. For wiring, using a small piece of protoboard is recommended to centralize the Ground and VCC rails for the LCD and joysticks.

Technology: Sin probar
material: —
Difficulty: Sin especificar