Meshopia · EnglishEnglish
MESHOPIA

4 modelos etiquetados

#protector

Descubre modelos 3D etiquetados como protector y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Protector de esquinas traseras para Arrma Senton

Rear corner protector for Arrma Senton

Accessory designed to cover the rear corners of an Arrma Senton body. The source presents it as a protector for those areas; the download corresponds to the printable part and not to a complete body. It does not specify the Senton version, the mounting method, or impact resistance tests. Preparation, compatibility, and printing Compare the part's outline with the corners of your body and check the clearance relative to the wheels and suspension. Before preparing the final print, check the support faces and potential overhangs in the slicer. The material and orientation must be chosen based on the desired fit and flexibility; there are no documented print settings that can be copied as a validated profile.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Protector de cables de motor para dron FPV

Motor cable protector for FPV drone

Part intended to cover the motor cables of an FPV drone along their path over the chassis arm. The source describes this function, but does not identify a compatible frame nor specify length, width, or fastening system. It is not presented as a universal protector nor as certified electrical insulation. Preparation, compatibility and printing Compare the part's channel with the cable bundle and the width of the arm. Check that the fastening does not compress conductors, rub against solder joints, or intrude into the path of the propellers. Prepare a fit test with the equipment turned off. No material or print profile is documented; flexibility and retention must be verified during actual assembly.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Cubierta antipolvo para Traxxas Slash LCG 4WD

Dust cover for Traxxas Slash LCG 4WD

Cover for the electronics of the Traxxas Slash LCG 4WD that maintains access to the battery swap and the ESC operation. The source describes two variants depending on the position of the ESC button: one for the old 3355X, with visible capacitors, and another for the 3355R. It also offers two solutions for the front intake: a grille with filtering material or a solid piece which, according to the author, does not filter dust from the air. The rear fan is the original Velineon, oriented to exhaust air. Preparation, compatibility, and printing The documented assembly uses nine M3 × 6 screws for the grilles and another M10 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.

Technology
Sin probar
material
—
Difficulty
Sin especificar