Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

6 modelos etiquetados

#model making

Descubre modelos 3D etiquetados como model making y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de 3D Printable RC Car Chassis — 160 & 180 mm Wheelbase

3D Printable RC Car Chassis — 160 & 180 mm Wheelbase

Build a custom RC car with this downloadable set of 24 STL files. The package includes two chassis variants with 160 mm and 180 mm wheelbases, plus drivetrain, steering, wheel and mounting components. Included parts: • Chassis: 160 mm and 180 mm wheelbase options • Main-shaft and motor gears, gear sleeve and axle transmission gears • Universal joints A/B/C and dogbone drive shafts • Front/rear axles, wheel axles, wheel brackets and rear wheel mounts • Steering knuckles and linkage, servo mounting plate and linkage • Wheel rims, TPU tire models, brake parts, brake discs and shock-absorber plates All STL filenames are in English. Quantity hints in the filenames follow the supplied source names; inspect each model in your slicer before choosing the number of copies. Choose the chassis variant that suits your build. This is a digital download, not an assembled vehicle. Electronics and non-printed hardware are not included. Assembly instructions, a hardware bill of materials and tested print settings were not supplied with this package. Check fit, clearances and component compatibility before printing or assembly. The cover is an AI-generated illustrative image and is not a photograph of a verified assembled build.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 1:10 OpenRC F1 2023 RC Car — 3D Printable STL Parts

1:10 OpenRC F1 2023 RC Car — 3D Printable STL Parts

Create your next open-wheel RC project with this 1:10 OpenRC F1 2023 parts package. The download contains 37 STL files for the body, chassis, steering, rear drivetrain, wings, wheels and detail parts. Included components: • Body and frame: center body, front/rear chassis plates, rear chassis, front vented section, lid and motor cover • Front steering module: upper/lower parts, front block, wheel axle, left/right hubs, servo saver and steering push pin • Rear drive: rear axle, pinion and spur gears, and left/right wheel axle holders • Aero and details: nose, front and rear wings, halo, mirrors, camera, shark fin and rain-light diffuser • Wheels: front/rear rims, front/rear tires and wheel lock nut • Extra parts: vented lid and servo holder Original author: Lucas. License: CC0. Filenames have been standardized in English; the supplied geometry is unchanged. Digital files only. Electronics and non-printed hardware are not included. No assembly guide, hardware bill of materials or tested print settings were supplied in this folder. Inspect each part in your slicer and check fit, quantities and compatibility before printing and assembly. The supplied cover is an AI-generated illustration, not a photograph of a verified assembled model.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Cyberbrick RC Dumptruck — 3D Printable Articulated Truck Parts

Cyberbrick RC Dumptruck — 3D Printable Articulated Truck Parts

Build your next RC construction project with this Cyberbrick RC Dumptruck package: 77 STL files covering the front assembly, rear assembly, articulated hinge, transmission, wheels and 60 mm cylinder components. Included parts: • Front assembly: cab, roof, hood, frame, bumper, grille, fenders, platforms, light inserts, axle and drivetrain components • Rear assembly: rear frame, dump bed sections, tailgate and connecting rod, axle parts, wheel holders and cylinder mounts • Articulation: front/rear hinge, hinge clip and axle • Transmission: differential assembly, axle housing, frames, axles, 18-tooth outer gear and 9-tooth spur gear • Cylinder parts: housing, back housing, 60 mm rod, N20 cylinder rod components and clips • Wheels: rim, tire and mirrored tire • Additional clips, washer and non-motorized axle variant Original author: Lucas. License: CC0. English filenames include assembly prefixes to distinguish parts with similar names. STL geometry is unchanged. Digital files only. Electronics, motors and non-printed hardware are not included. No assembly manual, hardware bill of materials or tested print settings were supplied. Scale and specific Cyberbrick electronics compatibility are not verified. Check quantities, fit and component requirements before printing and assembly. The supplied cover is an AI-generated illustration and does not document a verified assembled model.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Circular Ring, Spacer and Hook — Printable Parts Set

Circular Ring, Spacer and Hook — Printable Parts Set

Three distinct STL parts: a thin circular ring with small mounting holes, a thick circular spacer with a central opening, and an open hook-shaped bracket with a mounting hole. The archive repeats this set in two folders; exact copies are supplied once. No assembly diagram or demonstrated vehicle connection is included, so the set is presented as separate model-making parts. PACKAGE CONTENTS 3 unique STL files, renamed in English. Original geometry is preserved. No physical accessories are supplied. PRINTING AND USE No printer settings or build test are verified. Inspect the mesh and select orientation, supports, material and size for the intended miniature. Assembly compatibility has not been independently tested. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The cover is an original visualization generated locally from the supplied geometry; background tools are not included.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Paintstation / Benchtop Organizer for A3 Mat - Skadis

Paintstation / Benchtop Organizer for A3 Mat - Skadis

This paint station and benchtop organizer is designed for use with an A3 cutting mat and is based on the Skadis board system. The author describes it as an extra low tabletop and model making station suitable for workshop trolleys. Practical uses include serving as a model making station or a tabletop organizer for workshop trolleys. Included files: Tools 3-small box.002.stl Tools 3-Box mini left.stl Tools 3-Splint.stl Tools 3-Box.stl Tools 3-left side.stl Tools 3-Box mini.right.stl Tools 3-Top leftmitte.stl Tools 3-Top right.stl Tools 3-Top rightmitte.stl Tools 3-Small Box holder.stl Tools 3-side master .new right.stl Tools 3-Top left..stl Tools 3-Oben rechts neu.stl Tools 3-side master .new.left.stl Tools 3-Lötzinnhalter.stl Tools 3-Glas.stl Tools 3-Oben mitte..stl Tools 3-Oben links neu.stl Paint_Station_Skadis_Komplett.stl Tools 3-GRIFF.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar