MESHOPIAScale modelling & RC10 tagged models · Page 1 of 1
This model is an ALIGN logo designed for use within the RC community. It is intended for decorative purposes on items such as boxes. Included files: - ALIGN LOGO 0,4 pla.stl
HeliGrip RC helicopter skid clamps are designed for the secure transport and storage of RC helicopters. These clamps lock onto the helicopter's landing skids to provide stability during travel or while organizing a hangar. 1. Purpose: The system is intended to secure helicopter landing skids for safer transport and organized storage. 2. Practical Uses: They can be used to lock a helicopter in place while hitting the road or when storing equipment in a hangar. 3. Included Parts: The model files include various clamp components: RC helicopter skid clamp bottom short, Rc helicopter skid mount double bottom v1, RC helicopter skid clamp bottom, RC heilcopter skid clamp Bottom TPU insert, and RC helicopter skid clamp top TPU insert. 4. Printing and Assembly Guidance: The author suggests printing the main clamps in solid PLA, though ABS or PETG are recommended if heat resistance is needed for use inside a hot vehicle. The TPU inserts should be printed with 0.8mm top and bottom layers and 0.8mm outer walls. To complete the assembly, M4X12 or longer bolts are required.
Thunder Tiger Raptor 30/50/SE Tail pushrod guides Purpose These models are replacement tail pushrod guides designed for the Thunder Tiger Raptor 30, 50, and SE RC helicopters. They serve as an alternative to scarce or expensive original factory parts. Practical Uses These guides are intended for use in RC helicopter tail assemblies. While the author printed these in Ovature PLA, they suggest using ASA or PETG for applications requiring outdoor durability and heat resistance. Included Parts - rod guide.STL Printing and Assembly Guidance The author recommends printing at a 0.2mm layer height. For stability during printing, a 5mm brim should be used both inside and outside the model. No supports are required for this print. Because these are made to factory original size, the author notes that printer calibration must be accurate to ensure a proper fit. The author reports that they have test-fitted these parts and they fit perfectly.
Thunder Tiger Raptor 30/50/SE Elevator Arms Purpose These elevator arms are designed as replacement parts for the Thunder Tiger Raptor 30, 50, and SE RC helicopters. They serve as an alternative to original parts, which the author notes are often scarce and expensive on secondary markets like eBay. Practical Uses These arms are intended for use in RC helicopter maintenance and repair. The design is modeled after metal aftermarket versions, utilizing a separate ball link and a grub screw for attachment. Included Parts - Elevator arm (STL file provided) Printing/Assembly Guidance Assembly requires a separate ball link and a grub screw, consistent with the design of metal aftermarket versions.
Purpose A quick and simple helicopter landing pad designed for play. Practical Uses This model can be used as a landing surface for helicopters. Included Parts Heli Landing Pad.3mf Heli Landing Pad v1.step Heli Landing Pad.stl Heli Landing Pad_0.15mm_PETG_MK3S_1h55m.gcode Printing/Assembly Guidance The design has a 120mm diameter. The author suggests using a 0.15mm layer height and a two-color print using Prusament Galaxy Black PETG and eSun Yellow PETG, with the color change applied at layer 14.
Purpose This model is a landing pad designed for mini helicopters. It is specifically designed for use with an MMU or Palette system. Practical Uses The pad serves as a landing surface for small-scale RC helicopters. Included Parts - WhiteH.stl - Yellow Ring.stl - BlackBase.stl Printing/Assembly Guidance The default diameter is 200mm. The author states that this model cannot be printed in multiple parts and then glued together.
A one-piece helicopter display model with an angular cockpit, rotor and landing-gear details. The package contains one STL; the mesh was visually reviewed and includes an assembled rotorcraft shape. It is a static printable representation; functioning rotor mechanics and flight hardware are not supplied. PACKAGE CONTENTS 2 TXT files, 1 STL file. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks. Display axes have been reoriented for upright inspection; original source downloads retain their native orientation.
This mounting bracket is designed to hold a Spirit GeoLink on a 16 mm tail boom. Practical uses include securing a GeoLink device to a helicopter tail boom for stabilized flight or telemetry. The files include the SPIRIT GEOLINK holder and GEOLINK counterpart. Assembly requires M3 threaded inserts, M3×10 socket head cap screws, and thin double-sided tape (not exceeding 0.25 mm thickness). Apply tape to all shell halves and counterparts. Mount the holder horizontally on the tail boom and secure the counterparts with the screws. Follow manufacturer instructions for mounting the GeoLink.
AH-64D Apache supplied as a detailed digital helicopter model. Its supplied mesh depicts the tandem cockpit, main and tail rotors, radar dome above the rotor hub, landing gear, tail boom and external stores. Background planes were removed only from the cover scene; the downloadable source geometry is preserved.The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. PACKAGE CONTENTS The complete ZIP includes 3DS, BLEND, DAE, FBX, OBJ geometry, the available material libraries and associated texture assets, all with new English filenames. An English file guide maps renamed files to their source names. The separately downloadable OBJ supports the web preview. Original numerical coordinates and geometry are preserved; OBJ material references are adapted to renamed dependencies. Binary scene formats may require relinking external assets after extraction. PREPARATION AND USE Suitable for digital display, rendering and further scale-model preparation. Inspect units, dimensions, mesh integrity, thin walls, disconnected components and supports before printing. This is a digital asset; no verified physical assembly, tested print settings or functioning RC system is claimed. Hardware and electronics are not included. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.
An Airwolf / Bell 222-inspired fan-art helicopter multipart kit with 48 unique geometry files in MAX, OBJ and STL. It includes an assembled MAX scene, split fuselage and canopy forms, main-rotor components, tail and fin pieces, landing and side-equipment forms, plus the supplied assembly PDF and technical material companions. Original duplicates are documented as aliases. The finished image illustrates an assembled display model; no flight capability or working rotor/RC system has been tested. COMPLETE SOURCE PACKAGE Geometry inventory: 1 MAX, 23 OBJ, 24 STL. The ZIP preserves original native geometry bytes under English filenames. An included English file guide maps the files to their source part labels and documents duplicate aliases. Technical textures and documents are included where supplied. Internal native texture paths may require manual relinking. ON-DEMAND 3D INSPECTION 48 separate lightweight STL previews can be selected individually in the 3D viewer. Each is a normalized, approximate display conversion of its corresponding source, not a replacement for the full original. File identifier/source format mapping: 001: STL; 002: STL; 003: MAX; 004: OBJ; 005: OBJ; 006: OBJ; 007: OBJ; 008: OBJ; 009: OBJ; 010: OBJ; 011: OBJ; 012: OBJ; 013: OBJ; 014: OBJ; 015: OBJ; 016: OBJ; 017: OBJ; 018: OBJ; 019: OBJ; 020: OBJ; 021: OBJ; 022: OBJ; 023: OBJ; 024: OBJ; 025: OBJ; 026: OBJ; 027: STL; 028: STL; 029: STL; 030: STL; 031: STL; 032: STL; 033: STL; 034: STL; 035: STL; 036: STL; 037: STL; 038: STL; 039: STL; 040: STL; 041: STL; 042: STL; 043: STL; 044: STL; 045: STL; 046: STL; 047: STL; 048: STL. PREPARATION AND USE Check original units, scale, assembly alignment, clearances, wall thickness, manifoldness, fabrication supports and component compatibility before use. Printing, mechanical function and assembly fit are untested. No included working RC electronics or verified printer profile is claimed. OWN MESHOPIA USE IMAGE An original locally generated AI-assisted photorealistic presentation is guided by inspected source geometry or supplied private assembly references, with a new finish, camera and usage setting. It illustrates the model or tools in use; it is not evidence of a manufactured object or a physical print. Additional scenery, tools, workshop equipment and installation hardware shown for context are not supplied. LICENSE Author and publisher: MESHOPIA. CC0 redistribution authorization confirmed by the uploader.