MESHOPIAScale modelling & RC20 tagged models · Page 1 of 1
RC Flugzeug Ski Purpose These skis are designed for use with medium-sized aircraft. They are intended to facilitate winter flights. Practical Uses They are specifically suited for operating RC planes during winter conditions where snow or icy surfaces are present. Included Parts - Rc Ski.stl Printing/Assembly Guidance Not provided in the source text.
Rc F-16 Mini Purpose The Rc F-16 Mini is a small-scale remote-controlled aircraft designed for operation in small to medium-sized spaces. It is powered by a 30mm Electric Ducted Fan (EDF). Practical Uses This model is intended for RC flight enthusiasts looking for a compact aircraft suitable for limited flying areas. Included Parts The model consists of the following STL files: - Fusealage.stl - Fusealge Cap.stl - Nose.stl - Back Cockpit.stl - Left Wing.stl - Right Wing.stl - Wing Accessory.stl - Air Intake.stl - Verticle Stabilizer.stl - Elevator.stl
AVEX-2 1120mm - 3D Printed RC Airplane Purpose This model is a 3D printed remote-controlled airplane designed with a NACA 2410 airfoil profile. It is intended to achieve a target All-Up Weight (AUW) of approximately 1200g (+100g). Practical Uses This model is designed for RC flight using a single motor configuration. It is compatible with 2807 to 2812 brushless motors. Included Parts and Hardware The model features a wingspan of 1120 mm, a length of 680 mm, and a wing area of 21.56 dm². Required hardware and reinforcement include: - 1x Main Wing Spar (6mm x 900mm rod) - 1x Secondary Wing Spar (6mm x 300mm rod or BBQ skewer stick) - 2x Elevon Control Rods (3mm x 300mm rods or BBQ skewer sticks) - 2x 9g Micro servos - Brushless motor (2807 to 2812 size) Printing and Assembly Guidance The author recommends using PETG filament. The estimated print weight is between 600g and 700g. Recommended print settings are: - Layer Height: 0.28 mm - Wall Loops: 1 - Top Shell Layers: 3 - Bottom Shell Layers: 2 - Sparse Infill Density: 3–4% - Sparse Infill Pattern: Cubic
This model is a fuselage designed for an RC glider (unpowered glider). It is version 2 of the RC glider design. 120-300 words when facts suffice, otherwise be concise.
Purpose: These components are designed to replace the plastic wing struts on the FMS PA-18 1300mm Super Cub with carbon fibre rods. The author notes the design is not perfect, as the front strut is swept forwards slightly, causing a small bend in the strut. Practical Uses: Replacing weak plastic struts with carbon fibre to improve the model's structure. Included Parts: - Fuselage 4mm.stl - Wing 4mm.stl - Fuselage 3mm.stl - Wing 3mm.stl Printing/Assembly Guidance: Printing: Use a material with good layer adhesion such as Nylon (the author used Taulman PCTPE), ABS, or ASA. Do not use PLA. Print with supports and good tolerances. Assembly: 1. Cut carbon fibre rods (4mm or 3mm, at least 350mm each) to an approximate length. 2. Test-fit the rods into the fuselage pieces. 3. Glue struts into the fuselage piece using CA (super/krazy glue). Warning: CA bonds almost instantly and permanently. 4. Install the fuselage piece and trim the struts to the correct length. Use the wing pieces to verify the length, which is approximately 330-345mm. 5. Glue the wing pieces, ensuring correct orientation. Note that CA will bond instantly.
Purpose This is an experimental flying wing model designed for flight testing. The author notes that flight characteristics are currently unknown. Practical Uses The model is intended for use as a small-scale flying wing. The author suggests scaling the model up if you intend to use it for specific projects. Included Parts - flying-wing 3.0-v1.stl Printing and Assembly Guidance The model does not include slots for electronics. The author has included supports on the bottom of the hull. The base dimensions are 95.25 mm x 97 mm with a height of 107 mm.
A compact amphibian-style RC aircraft with a raised wing, streamlined cockpit and an elevated rear propulsion arrangement, supplied as a multipart printable assembly. PACKAGE CONTENTS 33 STL files, 1 PDF file. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.
A Stuka-inspired aircraft with a distinctive bent wing and propeller-driven layout. This smaller package contains eleven STL files; inspect their coverage before treating it as a complete airframe. PACKAGE CONTENTS 11 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.
An RC sport aircraft with a conventional wing and tail layout and visible lightweight lattice construction. Parts are supplied individually for printing and assembly. PACKAGE CONTENTS 1 PDF file, 68 STL files, 3 STEP files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.
SDSU AIAA DBF 2013 digital aircraft model. Aircraft concept mesh with a compact forward fuselage, rectangular wing surfaces with exposed airfoil sections, a long slender tail boom, tail surfaces, propeller and simplified landing gear. The source label refers to the SDSU AIAA DBF 2013 design. PACKAGE CONTENTS The ZIP contains the original STL aircraft mesh, the supplied native STEP assembly and an English source-file guide. The STL is also supplied separately for the web viewer. The STEP assembly has not been verified in its original CAD application. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION Its openings and partial structures are preserved, without adding absent aircraft components. It depicts a proposed finish, not a photograph of a manufactured or tested aircraft. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with uploader authorization. ADDITIONAL NATIVE SOURCE FILES The additional English-named source ZIP contains 32 unique native geometry files in IGS, SLDASM, SLDPRT format(s), together with available source companions and a filename mapping guide. Native source bytes are preserved. Component or material paths may need relinking using that guide. 1 source-derived STL display previews are added separately for on-demand browser viewing. Use compatible CAD or source software for native files without a verified preview. Existing files remain available. Display derivatives do not establish printability, dimensions, fit or flight performance.
Extra 300 digital aircraft model. Simplified Extra 300 airframe mesh with fuselage, low wing, defined control surfaces and tail. The front cowl is open. No motor, propeller, canopy glazing or landing gear is supplied in this mesh. PACKAGE CONTENTS The ZIP contains the original STL mesh and an English source-file guide. The same STL is supplied separately for the web viewer. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION It illustrates a proposed finish and does not document a manufactured or flight-tested aircraft. ADDITIONAL NATIVE CAD SOURCE A separate English-named ZIP now adds the original SolidWorks SLDPRT source and a filename mapping guide. Native bytes are preserved. A verified browser conversion of that SolidWorks part is not available; the existing source STL remains available on demand. Open the native CAD file in compatible software to inspect and edit it. LICENSE Published by MESHOPIA under CC0 with uploader authorization.
Christen Eagle II digital aircraft model. Christen Eagle II biplane display mesh with upper and lower wings, interplane struts, fuselage, rounded tail surfaces, propeller and simplified landing gear. The source folder mentions Kyosho Minium; compatibility with a physical Kyosho product has not been tested. PACKAGE CONTENTS The ZIP contains the original STL mesh and an English source-file guide. The same STL is supplied separately for the web viewer. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION Its openings and partial structures are preserved, without adding absent aircraft components. It depicts a proposed finish, not a photograph of a manufactured or tested aircraft. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with uploader authorization. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
L-39 Albatros digital aircraft model. Partial L-39 Albatros fuselage structure consisting of open frames, longitudinal rails and a cylindrical forward section. This source is a fuselage structure, not a complete aircraft: no wings, tail, outer skin, canopy, propulsion or landing gear is included. PACKAGE CONTENTS The ZIP contains the original STL mesh and an English source-file guide. The same STL is supplied separately for the web viewer. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION Its openings and partial structures are preserved, without adding absent aircraft components. It depicts a proposed finish, not a photograph of a manufactured or tested aircraft. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with uploader authorization. ADDITIONAL NATIVE SOURCE FILES The additional English-named source ZIP contains 1 unique native geometry files in 3DM format(s), together with available source companions and a filename mapping guide. Native source bytes are preserved. Component or material paths may need relinking using that guide. A verified browser conversion of these additional native files is not available. Use compatible CAD or source software for native files without a verified preview. Existing files remain available. Display derivatives do not establish printability, dimensions, fit or flight performance.
Siyahkanat Racing Airplane digital aircraft model. Streamlined racing aircraft mesh with a narrow fuselage, swept-looking main wing outline, raised cockpit fairing, tail surfaces, forward propeller and small forward surfaces. The file is labelled Siyahkanat. No operational RC equipment is supplied. PACKAGE CONTENTS The ZIP contains the original STL mesh and an English source-file guide. The same STL is supplied separately for the web viewer. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION Its openings and partial structures are preserved, without adding absent aircraft components. It depicts a proposed finish, not a photograph of a manufactured or tested aircraft. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with uploader authorization. ADDITIONAL NATIVE SOURCE FILES The additional English-named source ZIP contains 1 unique native geometry files in IGS format(s), together with available source companions and a filename mapping guide. Native source bytes are preserved. Component or material paths may need relinking using that guide. 1 source-derived STL display previews are added separately for on-demand browser viewing. Use compatible CAD or source software for native files without a verified preview. Existing files remain available. Display derivatives do not establish printability, dimensions, fit or flight performance.
F/A-18 Hornet digital aircraft model. Simplified twin-engine jet airframe with swept wings, leading-edge extensions, paired vertical fins, tailplanes, cockpit-shaped upper fuselage and open exhaust outlets. PACKAGE CONTENTS The ZIP contains the OBJ mesh, its material library, five supplied texture images and an English source-file guide. OBJ and MTL companion references are adapted to the English filenames; numerical vertex coordinates are preserved. Texture maps retain their original bytes. Maps are technical assets, not gallery photos. All added filenames are in English. SOURCE VERIFICATION The supplied assembled mesh was imported and visually inspected in local Blender. Binary STL triangle counts, where applicable, were checked. Source units and physical dimensions have not been independently confirmed. This listing represents the supplied digital geometry and its stated variants. PREPARATION AND USE Use for display, rendering or further model preparation. Check mesh integrity, thin walls, watertightness, supports, orientation, dimensions and component compatibility before fabrication. Printing and functional RC operation have not been tested. Motors, radios, electronics, hardware and absent geometry are not included. ORIGINAL MESHOPIA PRESENTATION It preserves the available shapes without inventing absent components. The image represents a proposed finish rather than a photograph of a manufactured aircraft. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with uploader authorization.
Supermarine Spitfire digital aircraft model. DIY Spitfire airframe collection with elliptical wings, a rounded vertical tail, control-surface outlines, segmented fuselage and wing sections. The supplied complete example depicts the assembled airframe without a propeller or landing gear. PACKAGE CONTENTS The ZIP contains 47 original STL assets across the Electronoobs and alternate DIY source groups, including a complete-aircraft example and split airframe parts. Variants are labelled separately in the English guide; interchangeability and fit have not been verified. Original STL bytes and numerical coordinates are preserved. The complete example is supplied separately for display and assembly reference, not a verified single-piece printing recommendation. All added filenames are in English. SOURCE VERIFICATION The supplied assembled mesh was imported and visually inspected in local Blender. Binary STL triangle counts, where applicable, were checked. Source units and physical dimensions have not been independently confirmed. This listing represents the supplied digital geometry and its stated variants. PREPARATION AND USE Use for display, rendering or further model preparation. Check mesh integrity, thin walls, watertightness, supports, orientation, dimensions and component compatibility before fabrication. Printing and functional RC operation have not been tested. Motors, radios, electronics, hardware and absent geometry are not included. ORIGINAL MESHOPIA PRESENTATION It preserves the available shapes without inventing absent components. The image represents a proposed finish rather than a photograph of a manufactured aircraft. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with uploader authorization.
Sbach Aircraft digital aircraft assembly. Aerobatic aircraft CAD design with a low main wing, streamlined fuselage, raised cockpit-shaped fairing, cowl openings, nose spinner, tail surfaces, main gear fairings and a tail wheel. A propeller is not present in the recovered geometry. PACKAGE CONTENTS The ZIP contains the original native STEP assembly, a derived STL for display and an English source-file guide. All added filenames are in English. Original CAD bytes are unchanged. The derived STL is supplied separately as the web viewer. GEOMETRY VERIFICATION The native STEP was imported into local FreeCAD and its 24 nonempty shapes tessellated into 272236 triangles with 0.15 source-unit deflection. The resulting assembly was imported into Blender and visually inspected. The STL does not preserve native CAD hierarchy or editing semantics. Source units and real physical dimensions have not been independently confirmed. PREPARATION AND USE Suitable for digital display, CAD inspection and further model preparation. Check topology, wall thickness, watertightness, disconnected surfaces, supports, orientation, dimensions and component fit before fabrication. No verified printing profile, physical build, aerodynamic performance or working RC system is claimed. Hardware and electronics are not supplied. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic AI visualization created locally from our Blender geometry reference, showing a proposed cream-and-blue finish at a model-aircraft flying field. The illustrated propeller, transparent cockpit appearance and surroundings demonstrate a possible presentation; they are not supplied in the recovered geometry or evidence of a tested physical build. LICENSE Published by MESHOPIA under CC0 with uploader authorization. ADDITIONAL NATIVE SOURCE FILES The additional English-named source ZIP contains 2 unique native geometry files in 3DM, IGS format(s), together with available source companions and a filename mapping guide. Native source bytes are preserved. Component or material paths may need relinking using that guide. 1 source-derived STL display previews are added separately for on-demand browser viewing. Use compatible CAD or source software for native files without a verified preview. Existing files remain available. Display derivatives do not establish printability, dimensions, fit or flight performance.
A North American FJ-1 Fury digital airframe with a rounded fuselage, low straight wings, a solid modeled canopy form, conventional tail and rear exhaust opening. The supplied Rhino geometry is an aircraft modeling asset; no functioning engine, landing-gear mechanism, RC electronics or flight-ready assembly is established. The English-named native source ZIP preserves 1 unique geometry files in 3DM format(s), available technical companions and a filename mapping guide. Native source bytes are unchanged. Component and material paths may require relinking using the guide. 1 separate source-derived STL display view(s) are provided for selectable on-demand browser inspection. Display derivatives may use normalized units and simplified geometry; use native files for editing and original dimensions. Native formats without a verified conversion remain available in the source ZIP; no unrelated preview has been substituted. The cover is an original AI-assisted MESHOPIA photorealistic illustration of the assembled model being inspected or finished in a hobby workshop. It does not document a manufactured or tested prototype. Physical scale, printability, topology, fit, strength and running or flight performance have not been independently tested. Inspect the source geometry before fabrication. Published by MESHOPIA under CC0 with the collection owner’s authorization.
A multipart A-10 Warthog aircraft model, identified as 1:16 in the source collection. The recognizable airframe has straight wings, two rear engine nacelles, twin tail fins and a detailed nose and cockpit. The source includes fuselage sections, wing and tail components, cockpit and canopy pieces, wheel-related parts, locating and connecting components, and decorative aircraft fittings. The scale is source information, not a physical measurement or verified printer fit. FILES AND ON-DEMAND 3D INSPECTION All 56 original STL geometry files are preserved in the English-named ZIP with a filename mapping guide. Each original STL is also supplied individually under its new English filename, so every supplied part can be selected for 3D inspection on demand. Native geometry bytes are unchanged; these are individual parts, not an automatically assembled airframe. Source units and dimensions are not physically verified. ASSEMBLY Inspect the filename guide to choose parts, variants and repeated quantities. Rods, pins, axles, adhesive and other hardware may be required and must be assessed separately. No flight-ready RC system or verified propulsion setup is claimed. The cover shows a new assembled-model finishing illustration based on an inspected assembled source reference. The supplier image is not the public cover; colors, setting and presentation are new. The foam cradle, hand and brush are illustrative props. NATIVE SOURCE CONTENTS English-named ZIP with supplied native geometry, technical material and texture companions, and an English filename mapping guide. Original geometry bytes are preserved. Native software and renderer compatibility are untested; texture paths may need relinking using the mapping. Technical textures are package assets, not public gallery photos. PREPARATION AND USE Digital model only. Physical scale, printability, wall thickness, watertightness, part separation, fit, strength and mechanical or RC operation have not been tested. Inspect the source in appropriate modelling or slicing software before fabrication. No verified printer profile or working drivetrain is claimed. ORIGINAL MESHOPIA PRESENTATION The cover is a new AI-assisted photorealistic illustration generated locally in ComfyUI using our inspected render of the supplied geometry. It shows a scale-model hobby finishing scene with a new finish, photographic lighting and environment. It does not document a manufactured or tested prototype. Hands, brushes, paint jars, bench and background props are illustrative and are not included. LICENSE AND AUTHOR Author and publisher: MESHOPIA. CC0 with the collection owner’s confirmed authorization. ADDITIONAL BINARY DISPLAY COPIES Two large ASCII STL parts also have smaller binary STL display copies: fuselage section 3 (original geometry-011, 229,666 triangles) and right wing section 1 (original geometry-044, 169,048 triangles). These retain every triangle and the source coordinate system at standard binary-STL float precision, without decimation or rescaling. They allow on-demand viewing of the two large text-format parts. The original ASCII bytes remain in the source ZIP and their original downloads. Compatible parts inside the native ZIP can also be opened individually with View ZIP parts. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
A compact Cessna CitationJet-family business jet with two rear-mounted engines, a T-tail, straight wings, short passenger cabin and landing gear. The source shows five side cabin windows; exact CJ subvariant is unverified. Exact physical scale and manufacturing specifications are unverified. COMPLETE NATIVE SOURCE The English-named ZIP includes the complete supplied OBJ geometry under a new identifying filename and an English guide mapping it to the original numbered source. Original geometry bytes are unchanged. Materials and textures are not promised where they were not supplied. ON-DEMAND 3D INSPECTION A separately selectable lightweight STL display is derived from the complete native geometry. It is simplified and normalized for browser inspection, so its coordinates do not establish fabrication units or replace the original OBJ. The compatible original OBJ inside the ZIP can also be selected through View ZIP parts, subject to the viewer size budget. PREPARATION AND USE Suitable for digital scenes, hobby-miniature display, paint detailing and further modeling preparation. Physical scale, mesh closure, wall thickness, separate-component fit, supports, strength, wheel movement and RC operation are untested. Inspect the native model in suitable software and a slicer before any fabrication. No physical vehicle, paint, tools, printer profile, electronics or working mechanism is included. ORIGINAL MESHOPIA PRESENTATION The cover is our own AI-assisted photorealistic hobby-use illustration, generated locally in ComfyUI from the inspected source geometry with a new finish and workshop setting. It shows miniature paint detailing and is marked MESHOPIA in orange at the lower left. It does not document a physically manufactured or tested sample. Hands, brushes and workshop items are illustrative. Supplier renders and catalog photos are private references and are not the published cover. LICENSE AND AUTHOR Author and publisher: MESHOPIA. CC0 with the collection owner’s confirmed redistribution authorization. TWO SOURCE CONFIGURATIONS The original OBJ scene contains two aircraft arrangements at separate vertical positions. Both remain intact in the unchanged native OBJ. Two separately selectable lightweight STL displays show the individual arrangements; their separation used the empty gap between native groups without cutting any source faces. These are inspection derivatives, not newly engineered printable assemblies.