HerramientasGratis
CR-6 Max Cable Swing Arm
A design for cable management on a direct drive CR-6 Max. The mount attaches to the location of the factory extruder motor. The author notes that the holes will need to be drilled out for a preferred fastener size, and only the two back holes are required to prevent interference with the swing motion of the arm. The assembly uses a standard skateboard bearing pressed into the swing arm to push on the stud. The author instructs to bolt the mount plate onto the machine first. The author reports printing in PLA using a 0.6mm nozzle and 3 walls, noting that other filament and settings should work.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar