4 tagged models · Page 1 of 1

#extruder

Discover 3D models tagged extruder and check their print information, files and terms before downloading.Search this tag in the catalogue →

HerramientasFree

CR-6 Max Cable Swing Arm

CR-6 Max Cable Swing Arm Purpose This design provides a cable management solution for a direct drive CR-6 Max. It is designed to mount to the location previously occupied by the factory extruder motor. Practical Uses To prevent interference with the swing motion of the arm, the author notes that only the two back holes should be used for mounting. The holes in the mount will require drilling to accommodate a preferred fastener size. Included Parts - Extruder Mount.stl - Swing Arm.stl Note: The assembly requires a standard skateboard bearing to be pressed into the swing arm to push on the stud. Printing and Assembly Guidance Assembly begins by bolting the mount plate onto the machine first. For printing, the author used PLA with a 0.6mm nozzle and 3 walls, though they note that other filaments and settings should work. Attribution: Designed by the original author.

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

BMG Aero Direct Extruder Mount For CR-10

Purpose This model provides an extruder mount and a layer fan mount designed for the Mellow Store. It is intended for use with a CR-10 or Ender 3 style carriage paired with an E3D volcano extruder. Practical Uses The components allow for the mounting of an E3D volcano extruder and a layer fan onto specific printer carriage configurations. Included Parts - Extruder_Mount.stl - Extruder_Mount_Right_Offset.stl - BLTouch_Mount.stl - Layer_Fan_BLTouch_Rail.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

Arc Reactor extruder knob for Ender 3 S1 Series

Arc Reactor extruder knob for Ender 3 S1 Series Purpose This model is a small arc reactor designed to function as an extruder knob for the Ender 3 S1 series printers. The author created this project to provide a specific design that was previously unavailable. Practical Uses It serves as a decorative and functional replacement knob for the extruder on Ender 3 S1 series printers. Included Parts - Ark Reactor Ender 3 S1 Extruder Knob.stl Printing and Assembly Guidance The author reports a print time of approximately 10 minutes. Regarding support settings, the author states that if the model is printed upside down, no supports are needed. If printed in a different orientation, the author notes "your mileage may vary."

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

Kingroon KP3S PRO V2 EXTRUDER CASE

Kingroon KP3S PRO V2 EXTRUDER CASE Purpose This model provides replacement extruder parts specifically designed for the Kingroon KP3S PRO V2 extruder case. The design aims to improve cooling efficiency through updated fan configurations. Practical Uses These parts are used to house the extruder components. The design features a brushless front fan and a side fan that utilizes a new 40x10 size. The side fan includes tubes intended for improved cooling. Both the front and side fan components are designed for pressure fit, meaning they can be installed or replaced without the use of screws. Included Parts The files include various extruder cover components, such as the left side screw and fan cover, and multiple test versions for the front fan. Printing and Assembly Guidance The author provides two thickness options for the case: a thinner version and a thicker version. While the thinner version is noted to work fine, the thicker version was designed to utilize more of the available space. Assembly for the fans relies on a pressure fit mechanism rather than screws.

Technology: Sin probar
material: —
Difficulty: Sin especificar