Model information
Description
Satsana Duct (Ender 3/ 3 V2) - Microswiss Direct Drive (Ender 3 CR-Touch Mount)
Purpose
This model is a Satsana fan duct designed specifically for Ender 3 and Ender 3 v2 printers equipped with a MicroSwiss direct drive installation. It is a modification of an existing design, featuring an adjusted screw region with a wider gap to allow for easier reach during installation.
Practical Uses
This duct enables the use of a CR-Touch sensor without requiring an additional printed part. To implement this, the user must utilize the standard Ender 3 CR-Touch mount bracket and secure it by screwing through the fan duct.
Included Parts
- Satsana Microswiss Duct.stl
Printing and Assembly Guidance
The author specifies printing this model using PETG filament at a layer height of 0.20mm. Assembly requires the Ender 3 CR-Touch mount bracket and screws to be passed through the duct to secure the sensor.
Original text by the author on Printables
<p>This is a Satsana fan duct for the Ender 3/Ender 3 v2 printer with a MicroSwiss direct drive installed. This allows for usage of the Cr-Touch without a printed part, you'll need to use the ender 3 cr touch mount bracket and screw through the fan duct.</p><p>Printed with PETG at .20mm</p><p> </p>
Questions and contributions