4 tagged models · Page 1 of 1

#cable management

Discover 3D models tagged cable management and check their print information, files and terms before downloading.Search this tag in the catalogue →

HerramientasFree

Alivio para cable elegoo CC remix cable securement part

Alivio para cable elegoo CC Purpose This model is a remix of two existing designs created to secure the printhead cable and prevent damage caused by repetitive movement over time. Practical Uses It is intended to fix issues related to cable breakage on the Elegoo CC printer by providing stability and protection to the cable assembly. Included Parts - Alivio ElegooCC .stl Printing and Assembly Guidance The author recommends printing the part in ABS or ASA for best performance. For installation, the author suggests placing the part onto the cable first and then sliding it into the correct position to make the process easier. This design does not require any additional accessories for use.

Technology: Sin probar
material: —
Difficulty: Sin especificar

OrganizaciónFree

Cable Organizer & SKÅDIS Bases — 4, 6, 8 and 10 Discs

Keep cables neatly organised at your desk, electronics station or hobby workbench with this cable-organiser package and a choice of SKÅDIS base sizes. The download includes three components and four base variants for 4, 6, 8 or 10 discs, so you can choose a compact arrangement or expand your cable-storage setup. USES • Keep USB charging and data leads together between uses. • Organise programming leads and small electronics cables at an RC or model-making workbench. • Separate cables by device, connector or purpose using different print colours. • Reduce loose coils and tangles in a drawer or on a desk. • Build a dedicated cable-storage arrangement with the supplied SKÅDIS bases. WHAT IS INCLUDED Seven STL files: obj_1_Loop v15_2.stl, obj_2_Loop v15_3.stl and obj_3_Loop v15_1.stl, plus SKADIS_base variants for 4, 6, 8 and 10 discs. The three files are separate supplied components, not interchangeable size options. Choose the base capacity that suits your space. PRINTING AND FIT Open the parts in your slicer and check orientation, overhangs, clearances and support requirements in the layer preview. Print one organiser and your preferred base first to check fit before producing a full set. Cable capacity depends on length, diameter, stiffness and connector size; check your own cables and avoid forcing tight bends near connectors. No printer-specific slicing profile is included. Choose material, layer height, infill and supports to suit your printer and the actual geometry. Print time and material consumption vary with the base size and slicing settings. Mounting fit on your intended SKÅDIS board should be checked before printing a larger batch. This is a digital STL download. Cables, pegboard, mounting hardware and physical printed parts are not included. SKÅDIS is referenced to describe the intended application; this design is not affiliated with or endorsed by IKEA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

CR-6 Max Cable Swing Arm

CR-6 Max Cable Swing Arm Purpose This design provides a cable management solution for a direct drive CR-6 Max. It is designed to mount to the location previously occupied by the factory extruder motor. Practical Uses To prevent interference with the swing motion of the arm, the author notes that only the two back holes should be used for mounting. The holes in the mount will require drilling to accommodate a preferred fastener size. Included Parts - Extruder Mount.stl - Swing Arm.stl Note: The assembly requires a standard skateboard bearing to be pressed into the swing arm to push on the stud. Printing and Assembly Guidance Assembly begins by bolting the mount plate onto the machine first. For printing, the author used PLA with a 0.6mm nozzle and 3 walls, though they note that other filaments and settings should work. Attribution: Designed by the original author.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Three-Channel Wire Clip for RC Cars - 14 AWG Source Label - 3MF

Keep three insulated wires together with this compact RC cable clip. Inspection of the original 3MF shows a solid rectangular body with three round, open-sided channels. The supplied photograph shows two clips grouping three wires inside an RC vehicle; the download contains one clip model. One original 3MF is included, renamed 01-three-channel-wire-clip.3mf. Its mesh and project contents are preserved. Wires, electronics and the vehicle shown in the reference are not included. No assembly of separate printed parts is required for the clip itself. The source filename identifies 14 AWG wiring. This is a source label, rather than an independently measured fit specification: insulation thickness varies, so compare the actual channels with your wire diameter before printing. Retention, material flexibility and suitability for your installation have not been physically tested by MESHOPIA. Inspect orientation and supports in your slicer and choose a material appropriate for the installation. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar