Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

8 modelos etiquetados · Página 1 de 1

#tire

Descubre modelos 3D etiquetados como tire y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Snow Tire for Open RC F1 Car

Snow Tire for Open RC F1 Car

Snow tire for open rc f1 car Purpose This model is a specialized snow tire designed specifically for use with an open RC F1 car. Practical Uses It is intended to provide traction and functionality for RC F1 vehicles operating in snowy conditions. Included Parts - Swanky Esboo.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Rim for Crawler Tires for 1/10 RCar

Rim for Crawler Tires for 1/10 RCar

Rim for Crawler Tires for 1/10 RCar Purpose Designed as part of the "Moster Tarmo" project, these rims are intended for use with crawler tires on a Tarmo5 vehicle. They serve as the interface between the crawler tires and the vehicle chassis. Practical Uses These rims are specifically designed to accommodate crawler tires, such as those found on Amazon (link provided in source). The author notes that for optimal performance in these new use cases, the vehicle should utilize higher gear ratios (e.g., 10:1) to prevent motor strain. To ensure the tires remain secure during cornering, the author recommends gluing the tire to the rim. Included Parts The model includes two files: - inner.stl - outter.stl Note: The author requests community assistance in identifying if these rims follow a specific standard to help other users fit them to different tires.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de 14mm Hex RC Drift Tires

14mm Hex RC Drift Tires

14mm Hex Rc Drift Tires Purpose These tires are designed for 1/10 scale RC cars, specifically engineered for drifting applications. They are designed to fit vehicles utilizing a 14mm hex. Practical Uses These tires are particularly designed for use with the Arrma Senton. They serve as a replacement or upgrade for 1/10 scale RC drift setups. Included Parts - 1 x Drift Tires.stl Specifications - Diameter: 111mm - Width: 47mm - Hex Size: 14mm

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Threaded car tire coaster
CocinaGratis

Threaded car tire coaster

Threaded car tire coaster Purpose This model is a representation of a threaded car tire designed for use as a coaster. Practical Uses While the model can be used as a decorative accessory, the author specifically recommends using the "centre filled" version for coaster applications. Included Parts The model is provided in several file formats, including STL, STEP, and IGES. The available versions are: - tire- centre filled - tire-no centre

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Rover Tire

Rover Tire

A tire model designed by the author for use with their specific rover project. This component is intended to serve as a functional part of a remote-controlled (RC) vehicle system.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de 1/10 scale RC tire

1/10 scale RC tire

This model serves as a placeholder tire designed for a 1/10 scale rock crawler. The author states it was modeled using a combination of different sources. Practical uses include serving as a component for a 1/10 scale RC truck. The design is intended for an 8mm hex hub featuring a 3mm center hole. The dimensions are described as a 14x10 rim with a 35x12 tire. Included files: - rc tire.stl - CFFFP_rc tire.gcode

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de 1:14 RC Loader Tyre — Mesh 138.20 × 56.60 mm | STL

1:14 RC Loader Tyre — Mesh 138.20 × 56.60 mm | STL

Blank-sidewall tyre geometry for an RC loader project. Digital files only; wheel, vehicle and printed parts are not included. MEASURED DIGITAL DIMENSIONS At the original source coordinates, the mesh envelope is approximately 138.200 × 138.199 × 56.596 mm (diameter axes × width, using the source millimetre convention). These are digital bounds, not physical measurements. The earlier 137 × 54.56 mm label remains in the original filename for traceability; it does not match the supplied mesh envelope. Neither file has been rescaled. Check the wheel interface and dimensions in your slicer before printing. FILES Original text STL and a smaller binary STL for the on-demand viewer. Both contain the same 450,318 triangles when represented as float32; no triangles were removed and no scaling was applied. DIGITAL REVIEW Both meshes have finite coordinates, closed surfaces and consistent winding. Physical fit, material behaviour, traction and print performance remain untested; no verified printer profile is supplied.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar