Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

4 modelos etiquetados · Página 1 de 1

#rear

Descubre modelos 3D etiquetados como rear y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Protector de esquinas traseras para Arrma Senton

Protector de esquinas traseras para Arrma Senton

Accesorio diseñado para cubrir las esquinas posteriores de la carrocería de un Arrma Senton. La fuente lo presenta como un protector de esas zonas; la descarga corresponde a la pieza imprimible y no a una carrocería completa. No especifica la versión del Senton, el método de sujeción ni pruebas de resistencia a impactos. Preparación, compatibilidad e impresión Compara el contorno de la pieza con las esquinas de tu carrocería y comprueba la holgura respecto a ruedas y suspensión. Antes de preparar la impresión definitiva, revisa las caras de apoyo y los posibles voladizos en el laminador. El material y la orientación deben elegirse según el ajuste y la flexibilidad buscados; no hay ajustes de impresión documentados que puedan copiarse como perfil validado.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Bmw CE04 rear wheel logo adapter

Bmw CE04 rear wheel logo adapter

Descripción del autor · Vlad Dogarescu (Printables) BMW CE 04 Wheel Logo Adapter A simple 3D-printable adapter that allows you to install a 68 mm BMW wheel emblem on the BMW CE 04, giving the wheels a much more finished, classic BMW look. I originally designed this for my own CE 04 because I felt the stock wheel hubs looked a little too plain. After a few hours of 3D modeling, the first print worked perfectly. What you need - The included 3D-printed adapter - 68 mm BMW wheel emblem/logo - Suitable screws/fasteners for mounting Standard 68 mm BMW emblems are widely available online and are relatively inexpensive. Printing The model is straightforward to print and does not require any particularly exotic settings or materials. For something mounted this close to the wheel and exposed to heat, water and sunlight, I recommend PETG, ASA or ABS rather than PLA. Installation The adapter mounts to the existing wheel hub and provides a holder for the 68 mm BMW emblem. No permanent modification to the scooter is required. Optional: Floating BMW Logo You can also use a 68 mm floating/self-leveling BMW wheel emblem, which keeps the BMW logo upright while the wheel rotates. These look great, but they are considerably more expensive than standard emblems. Compatibility Designed specifically for the BMW CE 04. If you print it, I'd love to see a photo of how it looks on your CE 04! Fuente: https://www.printables.com/model/1809889-bmw-ce04-rear-wheel-logo-adapter

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Rear Mudflaps for Arrma Kraton 6s RC Truggy

Rear Mudflaps for Arrma Kraton 6s RC Truggy

Rear Mudflaps for Arrma Kraton 6s RC Truggy Purpose These mudflaps are designed for the rear of the Arrma Kraton 6s RC Truggy to serve as fenders. Practical Uses They are intended to be mounted on the rear control arms of the vehicle. The author suggests printing these in TPU to achieve high durability for bashing. Included Parts - mudflap_R.stl - mudflap_L.stl - mudflap_0.2mm_FLEX_MK3_3h32m.gcode Printing and Assembly Guidance According to the author, these parts fit the rear control arms using the existing screw holes. Note that a slightly longer screw is required for the hole that connects to the stabilizer rods. The author reports successful printing using TPU.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar