#tail pushrod guides

Thunder Tiger Raptor 30/50/SE Tail pushrod guides

Thunder Tiger Raptor 30/50/SE Tail pushrod guides Purpose These models are replacement tail pushrod guides designed for the Thunder Tiger Raptor 30, 50, and SE RC helicopters. They serve as an alternative to scarce or expensive original factory parts. Practical Uses These guides are intended for use in RC helicopter tail assemblies. While the author printed these in Ovature PLA, they suggest using ASA or PETG for applications requiring outdoor durability and heat resistance. Included Parts - rod guide.STL Printing and Assembly Guidance The author recommends printing at a 0.2mm layer height. For stability during printing, a 5mm brim should be used both inside and outside the model. No supports are required for this print. Because these are made to factory original size, the author notes that printer calibration must be accurate to ensure a proper fit. The author reports that they have test-fitted these parts and they fit perfectly.

Technology

Sin probar

material

—

Difficulty

Sin especificar