Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

8 modelos etiquetados · Página 1 de 1

#enclosure

Descubre modelos 3D etiquetados como enclosure y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de 28BYJ-48 Stepper Motor Modules

28BYJ-48 Stepper Motor Modules

28BYJ-48 Stepper Motor Modules Purpose This modular design is intended for the 28BYJ-48 stepper motor. It is designed to facilitate use in robotics and arts projects by providing a versatile framework for the motor. Practical Uses Due to its modular nature, the design allows for the creation of enclosures and easy attachments on the sides of the module. Users can customize the design to suit specific needs by scaling the height and width or by attaching various mounts. Included Parts - 28BYJ-48 Stepper Motor Modules (.stl) Printing and Assembly Guidance The author recommends using PETG for this design.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Offset lid redesign for common DC PWM motor speed controller boxes

Offset lid redesign for common DC PWM motor speed controller boxes

Offset lid redesign for common DC PWM motor speed controller boxes. Purpose This model is a redesign of a lid intended to resolve interference issues found in standard enclosures. It specifically addresses problems caused by asymmetric potentiometer placement, a common characteristic in low-cost PWM controllers. Practical Uses This lid is designed for use with DC PWM motor speed controller boxes. It provides a solution for users whose controller lids do not seat correctly due to off-center potentiometer shafts, allowing the lid to fit properly without the need for manual modification or forcing the components into place. Included Parts - PWM box lid rev 1.stl Printing and Assembly Guidance This model was designed based on real-world fitment testing to ensure the lid seats correctly without modification.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Thermometer Power Switch x3 and DC jack mount for enclosure table

Thermometer Power Switch x3 and DC jack mount for enclosure table

This model set consists of a DC jack mount and a redesigned 3-button version of the Thermometer_Power_Switch_Box. This remix of thing:2012384 is intended to provide an option for a temperature display alongside three buttons, specifically designed to allow for air filter control within an enclosure setup. 120-300 words when facts suffice, otherwise be concise.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de MatterHackers CR-10 Door Handle

MatterHackers CR-10 Door Handle

MatterHackers CR-10 Door Handle Purpose This model is designed to serve as a door handle for the MatterHackers CR-10 Enclosure, functioning to keep the door closed tightly without excessive pressure or large air gaps. Practical Uses It is intended for use on a CR-10 enclosure to manage door closure. The author notes that when using low infill and self-tapping type screws, the screws can be driven directly into the printed material (such as PLA). Included Parts The download includes a STEP file (MatterHackers_Enclosure_Handle.step) to allow for customization of the holes, and an STL file (MatterHackers_Enclosure_Handle_V2.stl). Printing and Assembly Guidance The author reports that the part prints in under an hour. For printing, a minimum of four top and bottom shells is recommended. The author used 5% infill for their version. Note that printing at high speeds may result in underextrusion. To customize the holes using the STEP file, separate the top from the bottom and export them as individual STL files.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Arc enclosure backplate for ø80mm fan

Arc enclosure backplate for ø80mm fan

Arc enclosure backplate for ø80mm fan Purpose This model is a backplate designed for the Arc enclosure. Its primary purpose is to assist with PLA printing. Practical Uses It is intended for use with the Arc enclosure to facilitate better printing conditions for PLA materials. Included Parts The author provides the following files: - fan back cover v1.step - fan back cover belt cutout.step - rear right.3mf - rear left.3mf

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de P1P ARC Tool Tray

P1P ARC Tool Tray

This remixed tool tray is designed to mount over the left top side panel of an ARC enclosure for the P1P. The design features an added logo, a shaved bottom, and an enlarged hole specifically to accommodate a liquid glue stick. Practical uses include organizing tools within the ARC enclosure. The tray utilizes mounting points based on the ARC enclosure side panel and mounts into existing ARC holes. Included parts: - ARC tools (3).stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de AC Infinity 120mm Blower Fan Reference Model (Multifan S2)

AC Infinity 120mm Blower Fan Reference Model (Multifan S2)

Purpose: This is a reference model for the AC Infinity 120mm "Multifan S2" blower fan. The author created this to assist in modeling or printing mounts and adaptors for custom print enclosures. 120mm sizing is reported to be accurate to approximately 0.5mm based on the device received in March 2023. This model is intended for personal reference only; the author advises using it to size custom parts after purchasing the actual fan. No input was provided by the manufacturer. Practical Uses: Use as a dimensional guide when designing custom fan mounts, adaptors, or ventilation components for enclosures. Included Parts: - AC Infinity 120mm Blower Model Final - Pre-Boolean 8-27-2023.blend (includes reference images and schematics) - AC Infinity 120mm Blower Model Final - Post-Boolean 8-27-2023.blend - AC Infinity 120mm Blower Model Final 8-27-2023.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar