Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

10 modelos etiquetados · Página 1 de 1

#cr-6 se

Descubre modelos 3D etiquetados como cr-6 se y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de CR-6 SE Top Mount Filament Guide

CR-6 SE Top Mount Filament Guide

CR-6 SE Top Mount Filament Guide Purpose This model is a filament guide designed to resolve issues with filament movement, specifically addressing scratchy noises caused by how filament enters the runout sensor. It provides a mounting point for Bowden tubing to create a smoother path from a top-mounted spool holder to the printer. Practical Uses While specifically designed for the Creality CR-6 SE, the author suggests it may be compatible with any printer featuring a 20mm extrusion on the top beam. It is intended to be used in conjunction with a top-mount spool holder and a snap-on guide for the runout sensor. Included Parts The download includes the following files: - CR6-Top-Mount-Filament-Guide.3mf - CR6-Top-Mount-Filament-Guide.stl Required Extra Parts To complete the assembly, the following hardware is required: - 2 x M4 * 10mm screws - 2 x M4 tee nuts - 2 x PC4 M6 Bowden tube couplers - Bowden tubing

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de CR-6 SE Top Mounted Spool Holder Adapter - Ender 3 S1 / Prusa MKS Style

CR-6 SE Top Mounted Spool Holder Adapter - Ender 3 S1 / Prusa MKS Style

CR-6 SE Top Mounted Spool Holder Adapter - Ender 3 S1 / Prusa MKS Style Purpose This bracket is designed to mount the original spool holder to the top of a CR-6 SE printer. The author developed this design following a conversion of the CR-6 SE setup to a direct drive system. Practical Uses It functions as an adapter to reposition the printer's original spool holder onto the top frame, mimicking an Ender 3 S1 or Prusa MKS style mounting configuration. Included Parts The model files include: - CR-6 Top Spool Holder.stl - CR-6 SE Top Spool Holder v2.step Printing and Assembly Guidance The author recommends printing this part in PETG or a material stronger than PLA. Assembly requires the M3 screws and t-nuts taken from the printer's handle and the original spool hinge. Additionally, one single M3 nut is required for installation.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de CR-6 SE 5015 Filament Gear Fan

CR-6 SE 5015 Filament Gear Fan

CR-6 SE 5015 Filament Gear Fan Purpose This model is designed to add a 5015 fan to the filament gear assembly. The author implemented this modification to prevent filament from becoming too warm during the printing of small objects, which previously resulted in the filament being crushed by the gearbox. Practical Uses According to the author, this add-on improved the performance of the CR-6 SE printer by regulating the temperature of the filament within the gear mechanism. Included Parts - Gearfan_5015.stl Note: This modification is intended for use with a CR-6 SE printer.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de LGX Lite CR-6 SE Perch Mount for Micro Swiss Hotend

LGX Lite CR-6 SE Perch Mount for Micro Swiss Hotend

LGX Lite CR-6 SE Perch Mount for Micro Swiss Hotend Purpose This model is designed to make the Bondtech LGX Lite perch mount compatible with the Micro Swiss all-metal hotend. It modifies the standard mount to accommodate the specific dimensions of the Micro Swiss hardware. Practical Uses This mount is intended for use on the CR-6 SE printer. It allows for the integration of the LGX Lite extruder with a Micro Swiss all-metal hotend by providing a modified mounting interface. Included Parts - LGX Lite Strain Gauge Mount MicroSwiss.stl - LGX Lite CR-6 Mount MicroSwiss.stl Assembly Guidance The model features an expanded hole measuring 8.3mm to accommodate the top of the hotend. To install, remove the compression nut from the top of the hotend so that the mount can slip over the threaded protrusion.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Strong Feet for CR-6 SE or Ender 3

Strong Feet for CR-6 SE or Ender 3

Strong Feet for CR-6 se or Ender 3 Purpose This model provides reinforced legs with extra height for the CR-6 se or Ender 3. The increased elevation is designed to provide enough space for a quiet fan. Practical Uses These feet are intended to raise the printer base, potentially allowing for better airflow or clearance for cooling components. Included Parts To complete the installation, the following hardware is required: - 8x M4 T-nuts - 8x M4x12mm hex screws Printing Guidance Recommended print settings are as follows: - Material: PLA - Infill: 25% - Perimeters: 3 - Nozzle Diameter: 0.4mm - Layer Height: 0.2mm

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Raspberry Pi / OctoPi Drawer for CR-6 SE

Raspberry Pi / OctoPi Drawer for CR-6 SE

Raspberry Pi / OctoPi Drawer for CR-6 SE Purpose This model is a simple drawer designed to house a Raspberry Pi and a buck converter within the CR-6 SE printer. The author specifically utilized this setup for running OctoPi. Practical Uses It serves as a dedicated mounting solution for integrating a Raspberry Pi and power conversion hardware directly into the printer's internal space. The design includes integrated holes for wire management to help organize cabling. Included Parts - CR6Se-PiMount v4.stl Assembly and Installation Guidance The design features holes for wire management. For the cleanest wire runs to the Power Supply Unit (PSU), the author suggests drilling a hole at the back of the stock drawer mount.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Creality CR-6 SE - Filament Tray

Creality CR-6 SE - Filament Tray

Creality CR-6 SE - Filamen Tray Purpose This model is a filament tray designed specifically for the Creality CR-6 SE. Its primary function is to push the remaining filament off the edge of the spool. Practical Uses It is used as a functional accessory for the Creality CR-6 SE printer to assist in managing filament ends during the printing process. Included Parts - CR6-SE_FilamenTray.stl Printing and Assembly Guidance The author suggests printing this model with a layer height of 0.2mm and utilizing supports during the printing process.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de CR-6 SE Filament Sensor Mount Remix

CR-6 SE Filament Sensor Mount Remix

CR-6 SE Filament Sensor Mount Remix Purpose This model is a remix of CARTOK's original filament sensor mount. It is specifically redesigned to accommodate M6 PTFE fittings while maintaining compatibility with standard extruder locations. Practical Uses This mount is intended for use with the CR-6 or CR-6 SE printers. It allows users to integrate M6 PTFE fittings into their filament sensor setup, facilitating the routing of PTFE tubing. Included Parts - CR6-FilamentSensorMount.3mf Printing and Assembly Guidance Not provided in the source text.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Creality Cr-6 SE Filament Guide

Creality Cr-6 SE Filament Guide

Creality Cr-6 SE Filament Guide Purpose This model is designed for users utilizing a top mount filament setup on the Creality CR-6 SE. Its primary function is to bring the filament out slightly to improve routing. Practical Uses It serves as an upgrade for the CR-6 SE to assist with filament management. The design is intended to snap directly onto the extruder without the need for tools. Included Parts The model includes two files: - Cr6FilamentGuide3.stl - Cr6FilamentGuideV2.stl Assembly Guidance The guide is designed to snap onto the extruder. The author notes that a small amount of double-sided tape may be required inside the component to ensure it stays securely in place.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar