Información del modelo
Descripción
Strong Feet for CR-6 se or Ender 3
Purpose
This model provides reinforced legs with extra height for the CR-6 se or Ender 3. The increased elevation is designed to provide enough space for a quiet fan.
Practical Uses
These feet are intended to raise the printer base, potentially allowing for better airflow or clearance for cooling components.
Included Parts
To complete the installation, the following hardware is required:
- 8x M4 T-nuts
- 8x M4x12mm hex screws
Printing Guidance
Recommended print settings are as follows:
- Material: PLA
- Infill: 25%
- Perimeters: 3
- Nozzle Diameter: 0.4mm
- Layer Height: 0.2mm
Texto original del autor en Printables
<p>Reinforced leg + extra height. Quiet fan also brings enough space.</p><p> </p><p>Settings:</p><ul><li>Material: PLA</li><li>Infill: 25%</li><li>Perimeters: 3</li><li>Nozzle: 0.4</li><li>Layer heigt: 0.2</li></ul><p>Required & Installation:<br>8x M4 T- nut <br>8x M4x12mm hex screw </p>
Preguntas y aportaciones