Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#lgx lite

Descubre modelos 3D etiquetados como lgx lite y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de LGX Lite CR-6 SE Perch Mount for Micro Swiss Hotend

LGX Lite CR-6 SE Perch Mount for Micro Swiss Hotend

LGX Lite CR-6 SE Perch Mount for Micro Swiss Hotend Purpose This model is designed to make the Bondtech LGX Lite perch mount compatible with the Micro Swiss all-metal hotend. It modifies the standard mount to accommodate the specific dimensions of the Micro Swiss hardware. Practical Uses This mount is intended for use on the CR-6 SE printer. It allows for the integration of the LGX Lite extruder with a Micro Swiss all-metal hotend by providing a modified mounting interface. Included Parts - LGX Lite Strain Gauge Mount MicroSwiss.stl - LGX Lite CR-6 Mount MicroSwiss.stl Assembly Guidance The model features an expanded hole measuring 8.3mm to accommodate the top of the hotend. To install, remove the compression nut from the top of the hotend so that the mount can slip over the threaded protrusion.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de LGX Lite CAN Side Mount (Huvud/SHT42)

LGX Lite CAN Side Mount (Huvud/SHT42)

LGX Lite CAN Side Mount Purpose This model is designed to provide a side mounting solution for CAN toolhead boards to the LGX Lite extruder. It is specifically intended for NEMA 17 sized boards. Practical Uses It is compatible with various CAN modules, including Huvud, EBB36, and FLY-SHT42. The mount allows these boards to be attached to the side of the LGX Lite assembly. Included Parts The Bill of Materials (BOM) for assembly includes: - 4x M3 Square Nuts (provided with the LGX Lite) - 4x M3 Nuts - 2x M3x6 BHCS (to mount through the LGX Lite holes) - 4x M3x6 SHCS (or suitable hardware for your specific board) to secure the board Assembly Guidance To assemble, place the two M3 square nuts that come with the LGX Lite into the side recesses of the mount. Use the M3x6 BHCS to secure the mount to the LGX Lite holes, and use the M3x6 SHCS to mount the CAN board to the side mount.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar