Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

4 modelos etiquetados · Página 1 de 1

#raspberry pi

Descubre modelos 3D etiquetados como raspberry pi y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Lego 42099 Raspberry Pi and Camera mounts

Lego 42099 Raspberry Pi and Camera mounts

Purpose: These brackets are designed to hold a Raspberry Pi and a Raspberry Pi camera on the Lego 42099 (4X4 X-treme Off-Roader). The setup is intended for remote control driving, allowing for WiFi control and a remote video feed to address the limited range of Bluetooth control via the official Lego app. 1 Practical Uses: The author suggests mounting the Raspberry Pi camera on the roof for better visibility and placing the Raspberry Pi inside the cabin. The design is compatible with Raspberry Pi model 3B+ and Raspberry Pi camera rev1.4. Included Parts: - CameraBracket.stl - PiHolder A.stl - PiHolder B.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Raspberry Pi / OctoPi Drawer for CR-6 SE

Raspberry Pi / OctoPi Drawer for CR-6 SE

Raspberry Pi / OctoPi Drawer for CR-6 SE Purpose This model is a simple drawer designed to house a Raspberry Pi and a buck converter within the CR-6 SE printer. The author specifically utilized this setup for running OctoPi. Practical Uses It serves as a dedicated mounting solution for integrating a Raspberry Pi and power conversion hardware directly into the printer's internal space. The design includes integrated holes for wire management to help organize cabling. Included Parts - CR6Se-PiMount v4.stl Assembly and Installation Guidance The design features holes for wire management. For the cleanest wire runs to the Power Supply Unit (PSU), the author suggests drilling a hole at the back of the stock drawer mount.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Prusa I3 MK3S+ Cabinet for Raspberry Pi, DC Converter, and LED Light Bar Switch

Prusa I3 MK3S+ Cabinet for Raspberry Pi, DC Converter, and LED Light Bar Switch

Purpose: This cabinet is designed for the Prusa I3 MK3S+ to house a Raspberry Pi, a DC converter, and a switch for an LED light bar. 1. 24V is drawn from the input of the Einsy RAMBo MK3S+ Mainboard to the DC converter and the LED light bar. 2. The DC converter is adjusted to output 5.1V for the Raspberry Pi. 3. The Raspberry Pi can run OctoPrint for network control of the printer. 1. Prusa Raspberry DC konverter kabinet.stl 2. Prusa Raspberry DC konverter kabinet Cover.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar