Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#bandit

Descubre modelos 3D etiquetados como bandit y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Traxxas receiver box seal TRA3629

Traxxas receiver box seal TRA3629

Traxxas receiver box seal TRA3629 Purpose This model is a replacement seal designed for Traxxas receiver boxes. It serves as a gasket to help maintain the integrity of the receiver compartment. Practical Uses It is compatible with several Traxxas models, including the Slash 4x4, Stampede 4x4, Bandit, Rustler, Stampede, and Spartan. It is intended for use in applications requiring a waterproof seal for the receiver box. Included Parts - 1 x Traxxas receiver box seal (traxxas rustler receiver box seal-Body.stl) Printing/Assembly Guidance According to the source, this part is intended to be printed in TPU.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Traxxas 2wd Wheelie Bar

Traxxas 2wd Wheelie Bar

Traxxas 2wd Wheelie Bar Purpose This is a fully printable wheelie bar designed for Traxxas 1/10 scale 2wd cars and trucks. It is intended to provide a 35-45 degree angle depending on the specific vehicle, while remaining tucked closer to the body. Practical Uses This model is compatible with RPM and Stock bumper mounts for vehicles including the Traxxas Bandit, Rustler, Stampede, and Slash. It is designed to be a replaceable part that can be reprinted if worn down or broken during use. Included Parts - wheelie center bar.stl - Side Bracket.obj - Wheelie Bar.3mf - Wheel.stl Printing and Assembly Guidance For printing, the creator used PETG with a layer height of 0.15mm to 0.20mm, 6 sides, 70% infill, and supports generated from the print bed only. Assembly requires six 3mm screws. It is recommended to use screws between 15mm and 20mm long, though 10mm screws can be used if necessary.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar