Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

3 modelos etiquetados · Página 1 de 1

#receiver

Descubre modelos 3D etiquetados como receiver y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Traxxas receiver box seal TRA3629

Traxxas receiver box seal TRA3629

Traxxas receiver box seal TRA3629 Purpose This model is a replacement seal designed for Traxxas receiver boxes. It serves as a gasket to help maintain the integrity of the receiver compartment. Practical Uses It is compatible with several Traxxas models, including the Slash 4x4, Stampede 4x4, Bandit, Rustler, Stampede, and Spartan. It is intended for use in applications requiring a waterproof seal for the receiver box. Included Parts - 1 x Traxxas receiver box seal (traxxas rustler receiver box seal-Body.stl) Printing/Assembly Guidance According to the source, this part is intended to be printed in TPU.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FRSKY Archer SR 8 PRO Receiver holder

FRSKY Archer SR 8 PRO Receiver holder

FRSKY Archer SR 8 PRO Receiver holder Purpose This model is designed as a simple holder specifically for the FRSKY Archer SR8 PRO receiver. Practical Uses It serves as a mounting solution for the FRSKY Archer SR8 PRO receiver in RC applications. Included Parts - Držák SR 8 PRO var.1 v3.stl Assembly Guidance The author instructs to use a rubber band to secure the receiver within the holder.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Spektrum AR637T Receiver Holder with Antenna Mount

Spektrum AR637T Receiver Holder with Antenna Mount

Purpose This is a slip-in mount designed for the Spektrum AR637T receiver. It allows dual antennas to be routed through one of four holes each to achieve a required 90-degree angle between them. Practical Uses The holes are sized for PTFE tubing. The author suggests that adding 0.2 mm to the tubing diameter when adjusting hole sizes provides a good fit. Included Parts - Spektrum AR637T RC Rcvr Antenna Mount-AntennaMountBody.stl - Spektrum AR637T RC Rcvr Antenna Mount.fcstd Printing and Assembly Guidance The author printed this using white ASA on a Bambu X1C with BambuStudio's 0.16 Optimal setting and normal support. The model should be placed with the hole end down on the build plate. Note that cleaning support material from the holes may take a few minutes.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar