Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#wheelie bar

Descubre modelos 3D etiquetados como wheelie bar y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de ARRMA Wheelie bar

ARRMA Wheelie bar

ARRMA Wheelie Bar Purpose This design concept is a wheelie bar tailored specifically for ARRMA QUAKE and ARRMA GORGON vehicles. Its primary purpose is to provide stability and prevent the vehicles from flipping backwards during wheelie maneuvers. Practical Uses Designed for durability and stability, this bar is intended to withstand high-speed stresses during RC stunt driving. Included Parts The design consists of arms and wheels. Assembly requires 6x M3 screws. Printing and Assembly Guidance For printing, the author suggests using high-strength filaments such as ABS or TPU 72D for the arms. The wheels can be printed in PETG or PLA. To assemble, attach the bar to the rear axle and ensure it is tightened securely to improve wheelie control. A washer can be added between the wheels and the arm for assembly.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Traxxas 2wd Wheelie Bar

Traxxas 2wd Wheelie Bar

Traxxas 2wd Wheelie Bar Purpose This is a fully printable wheelie bar designed for Traxxas 1/10 scale 2wd cars and trucks. It is intended to provide a 35-45 degree angle depending on the specific vehicle, while remaining tucked closer to the body. Practical Uses This model is compatible with RPM and Stock bumper mounts for vehicles including the Traxxas Bandit, Rustler, Stampede, and Slash. It is designed to be a replaceable part that can be reprinted if worn down or broken during use. Included Parts - wheelie center bar.stl - Side Bracket.obj - Wheelie Bar.3mf - Wheel.stl Printing and Assembly Guidance For printing, the creator used PETG with a layer height of 0.15mm to 0.20mm, 6 sides, 70% infill, and supports generated from the print bed only. Assembly requires six 3mm screws. It is recommended to use screws between 15mm and 20mm long, though 10mm screws can be used if necessary.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar