Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#seal

Descubre modelos 3D etiquetados como seal y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Traxxas receiver box seal TRA3629

Traxxas receiver box seal TRA3629

Traxxas receiver box seal TRA3629 Purpose This model is a replacement seal designed for Traxxas receiver boxes. It serves as a gasket to help maintain the integrity of the receiver compartment. Practical Uses It is compatible with several Traxxas models, including the Slash 4x4, Stampede 4x4, Bandit, Rustler, Stampede, and Spartan. It is intended for use in applications requiring a waterproof seal for the receiver box. Included Parts - 1 x Traxxas receiver box seal (traxxas rustler receiver box seal-Body.stl) Printing/Assembly Guidance According to the source, this part is intended to be printed in TPU.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Axial SCX10 Shock Seals Replacement Spacers

Axial SCX10 Shock Seals Replacement Spacers

Axial SCX10 Shock Seals Purpose These replacement spacers are designed to address oil leakage issues in factory Axial SCX10 shocks. By replacing the original 1mm spacers with these 1.4mm versions, the additional thickness provides extra compression on the O-rings when the bottom cap is tightened, creating a tighter seal without affecting damping behavior. Practical Uses This modification is intended for RC crawler enthusiasts looking to prevent oil from escaping their SCX10 factory shocks. The increased thickness aims to provide a more reliable seal over long-term use. Included Parts - Shock Spacer AXI233002 replacement (.stl) - OpenSCAD source code (.scad) for tolerance adjustments Printing and Assembly Guidance For printing, the creator used a Prusa MK4 with a 0.4mm nozzle and PET-G material. It is recommended to use a 0.10mm layer height to ensure a smooth perimeter. Users should print a single test piece to verify that the outer diameter matches the original injection-molded spacers and that the thickness is exactly 1.40mm. The inner diameter can be slightly smaller as long as the shock shaft glides smoothly. To assemble, rebuild the shocks according to the manual, replacing the original spacers between the O-rings with these printed parts. Apply shock lubricant liberally around the O-rings. The bottom shock cap may feel slightly tighter than before due to the increased spacer thickness.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar