5 modelos etiquetados · Página 1 de 1

#3D printing

Descubre modelos 3D etiquetados como 3D printing y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

RC & MecánicaGratis

3D Printable RC Car Chassis — 160 & 180 mm Wheelbase

Build a custom RC car with this downloadable set of 24 STL files. The package includes two chassis variants with 160 mm and 180 mm wheelbases, plus drivetrain, steering, wheel and mounting components. Included parts: • Chassis: 160 mm and 180 mm wheelbase options • Main-shaft and motor gears, gear sleeve and axle transmission gears • Universal joints A/B/C and dogbone drive shafts • Front/rear axles, wheel axles, wheel brackets and rear wheel mounts • Steering knuckles and linkage, servo mounting plate and linkage • Wheel rims, TPU tire models, brake parts, brake discs and shock-absorber plates All STL filenames are in English. Quantity hints in the filenames follow the supplied source names; inspect each model in your slicer before choosing the number of copies. Choose the chassis variant that suits your build. This is a digital download, not an assembled vehicle. Electronics and non-printed hardware are not included. Assembly instructions, a hardware bill of materials and tested print settings were not supplied with this package. Check fit, clearances and component compatibility before printing or assembly. The cover is an AI-generated illustrative image and is not a photograph of a verified assembled build.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

1:10 OpenRC F1 2023 RC Car — 3D Printable STL Parts

Create your next open-wheel RC project with this 1:10 OpenRC F1 2023 parts package. The download contains 37 STL files for the body, chassis, steering, rear drivetrain, wings, wheels and detail parts. Included components: • Body and frame: center body, front/rear chassis plates, rear chassis, front vented section, lid and motor cover • Front steering module: upper/lower parts, front block, wheel axle, left/right hubs, servo saver and steering push pin • Rear drive: rear axle, pinion and spur gears, and left/right wheel axle holders • Aero and details: nose, front and rear wings, halo, mirrors, camera, shark fin and rain-light diffuser • Wheels: front/rear rims, front/rear tires and wheel lock nut • Extra parts: vented lid and servo holder Original author: Lucas. License: CC0. Filenames have been standardized in English; the supplied geometry is unchanged. Digital files only. Electronics and non-printed hardware are not included. No assembly guide, hardware bill of materials or tested print settings were supplied in this folder. Inspect each part in your slicer and check fit, quantities and compatibility before printing and assembly. The supplied cover is an AI-generated illustration, not a photograph of a verified assembled model.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Cyberbrick RC Dumptruck — 3D Printable Articulated Truck Parts

Build your next RC construction project with this Cyberbrick RC Dumptruck package: 77 STL files covering the front assembly, rear assembly, articulated hinge, transmission, wheels and 60 mm cylinder components. Included parts: • Front assembly: cab, roof, hood, frame, bumper, grille, fenders, platforms, light inserts, axle and drivetrain components • Rear assembly: rear frame, dump bed sections, tailgate and connecting rod, axle parts, wheel holders and cylinder mounts • Articulation: front/rear hinge, hinge clip and axle • Transmission: differential assembly, axle housing, frames, axles, 18-tooth outer gear and 9-tooth spur gear • Cylinder parts: housing, back housing, 60 mm rod, N20 cylinder rod components and clips • Wheels: rim, tire and mirrored tire • Additional clips, washer and non-motorized axle variant Original author: Lucas. License: CC0. English filenames include assembly prefixes to distinguish parts with similar names. STL geometry is unchanged. Digital files only. Electronics, motors and non-printed hardware are not included. No assembly manual, hardware bill of materials or tested print settings were supplied. Scale and specific Cyberbrick electronics compatibility are not verified. Check quantities, fit and component requirements before printing and assembly. The supplied cover is an AI-generated illustration and does not document a verified assembled model.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Slot Car R3 and R4 Inside Track Kerb Set — STL Component Set

Six curved inside-track kerb meshes: source-labelled R3 and R4 five-degree pieces and two taper variants for each radius. These are track accessories, not a complete track layout. PACKAGE CONTENTS The complete ZIP includes 6 unique STL components, with new English filenames and an English file guide identifying every original source component. Original geometry and coordinates are preserved. The separately downloadable STL is one component for the web viewer; extract the ZIP to obtain the full supplied set. PRESENTATION The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. PREPARATION AND USE Inspect units, dimensions, mesh integrity, thin walls, clearance, mating surfaces and support requirements before printing. Scale and compatibility follow source labels and have not been independently verified. Physical assembly and functional performance have not been tested. Other model parts, hardware, paint and equipment are not included. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Oficina9,95 €

MESHOPIA MS42 — Modular Desk & Drawer Storage | 154 STL Designs

**MESHOPIA MS42** is a modular desk and drawer storage system built on a shared 42 mm grid. The complete digital library contains 154 STL designs: 96 containers (open bins, divided bins, tall holders and desk organisers), 30 lids and stacking adapters, 26 bases, a reusable joining key and a fit-test foot. Choose from 30 footprints (1x1 to 10x1 and up to 6x6). Grid-direction dimensions follow 42 × cell count − 0.6 mm: 1x1 = 41.4 mm square; 4x4 = 167.4 mm; 6x6 = 251.4 mm. Open-bin heights include 21, 28, 42, 56 and 70 mm; tall holders are 105 mm. Footprints and height availability vary; check the included catalogue. Large pieces may exceed common build volumes. Keep 100% scale. The files include the STL library, editable Blender library and display configurations, BOM/catalogue/inventory, English assembly and printing guide, Spanish quick start and digital mesh-check reports. Modules cover pencil/tool wells, battery wells, device pockets, card racks and cable organisers. FDM-oriented in millimetres. PLA/PETG, 0.4 mm nozzle, 0.20 mm layers, 3–4 walls and 15–25% infill are starting suggestions, not validated profiles. Choose print orientation and supports by the included guide and your slicer. Joining keys help align drawer layouts horizontally; they are not locks. Stacking adapters locate parts but do not latch or seal. Keep stacks low and stable. All 154 meshes passed digital geometry checks and 372 static mating configurations were checked. The set has not been physically print-tested; physical fit, load capacity and durability are not claimed. Print the included fit-test pieces first. Generic storage openings: measure actual items before printing. Gridfinity compatibility is not claimed. Digital files only; no physical product or photo props included. Three AI visualisations show arrangements assembled from the actual Blender meshes. Original MESHOPIA geometry, developed for its own MS42 interface; Deskfinity inspired the function, but no reference STL was imported.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar