Ghost X Jet — Concept Aircraft Display Model
OVERVIEW This source-labeled Ghost X concept jet display model is based on the supplied source collection. The inspected native scene depicts a pointed nose, raised cockpit canopy, two upright fins, broad swept wings, supplied external stores, aft exhaust detail and deployed wheeled landing gear. It is presented as a static miniature subject. No operating mechanism, flight capability, physical print or tested assembly is claimed. DOWNLOAD CONTENTS The ZIP includes the full-resolution linked OBJ and MTL scene, every attached OBJ viewing variant, supplied texture maps, English preparation notes and the current locally generated completed-display illustration. Mesh coordinates, topology, normals, UVs, smoothing and material settings are retained. Texture references are updated to the supplied files. A file inventory accompanies the resources. Earlier processing records and reference photographs are replaced by this guide and the current illustration. NATIVE APPEARANCE AND DISPLAY The corrected cover uses a verified inspection cache of the supplied converted source geometry. Illustrative materials were assigned to reviewed existing surface regions. Source vertex coordinates, topology, UV arrays and world placement were checked before and after presentation preparation. No source corpus file was modified. This cache is generated for illustration and is not an original authored BLEND scene or a recovered original color scheme. The presentation retains an illustrative muted blue-green body, dark existing canopy and tyres, pale existing stores and subdued dark-metal exhaust. This is an illustrative palette on existing source surfaces, not an independently recovered original livery or verified real aircraft variant. No serial, unit or measured color match is claimed. The canopy and twin fins are above the body; the existing wheels and stores are below. No missing interior, extra opening or new vehicle component has been invented. Local AI is restricted to surface presentation, with native dark and colored paint regions protected to retain markings and detail. The board and small display support are illustration scenery, not downloadable printable parts. The support meets the existing underside and does not change the source landing-gear pose or certify that its wheels share a ground plane. PRINTING ADVICE — UNTESTED Inspect the full source in a slicer or mesh checker before fabrication. Check open boundaries, self-intersections, disconnected shells, wall thickness and unsupported details. Imported mesh object counts do not establish watertightness, a single printable solid, verified part separation or assembly fit. Pay particular attention to thin wing or rotor edges, cockpit boundaries, small projections, landing-gear or skid members and fine mechanical details. Visibility in an image does not guarantee that a feature will survive printing or handling at the chosen size. Plan supports on areas that can be cleaned safely. If preparation cuts or shell separation are needed, make them on a working copy and retain the full source as a reference. Choose material, layer height, exposure or temperature and supports for your own equipment. Print a representative fine-detail sample before a full build. No tested preset, tolerance or assembly sequence is supplied. DIMENSIONS AND SCALE Physical units and native scale are unverified. The display OBJ is uniformly normalized for visualization. Confirm dimensions using the retained full-resolution source in your slicer. Resize by target dimension divided by current dimension multiplied by 100. For example, a confirmed 200 mm length reduced to 150 mm requires 75%; this is an arithmetic example, not a measurement of this file. For a documented original 1:N scale and target 1:T, use N divided by T multiplied by 100. No particular 1:32, 1:48 or 1:72 scale is claimed as included. Recheck minimum features and clearances after resizing. FINISHING, IMAGE AND RIGHTS Test primer and paint on a prepared sample. Protect the fine details during sanding, support removal and handling. No physical decal sheet or newly invented markings are supplied. The cover is made on this PC using Blender and local ComfyUI/Qwen Image Edit. It is an AI-assisted illustration of a finished painted miniature, not a photograph of a physical print. The uploader declares the source design non-AI and authorizes redistribution under CC0. The original creator was not independently identified. Physical printing, assembly fit and native scale remain unverified. #AircraftModel #ScaleModel #3DPrinting #ModelMaking #Miniature #CC0
- Tecnología
- Sin probar
- Material
- —
- Dificultad
- Sin especificar