25 modelos etiquetados · Página 1 de 1

#model kit

Descubre modelos 3D etiquetados como model kit y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

Vehículos y transporteGratis

Golden-Wing Electric Sailplane - Printable Airframe and Assembly Reference

OVERVIEW This long-wing electric sailplane is presented as a complete printable airframe resource set with an assembled, painted digital display reference. The standard display joins28 original printed components: the four main fuselage sections, ten wing sections, four aileron sections, eight tail components, a rear collar and one selected motor-mount plate. Source mesh vertices and faces are retained; the assembly uses rigid positioning rather than reshaping the airframe. WHAT THE FOUR DOWNLOADS CONTAIN The complete source-resource ZIP retains52 unique supplied resources plus30 embedded STL instances:34 standaloneSTL files,4factory projects,4G-code resources,3INI profiles,3slice files,3PDF documents and the supplied reference image. A native editable Blender package contains the assembled display and an English resource guide. Two complete, coloured3MF assemblies are provided:28 supplied printed parts only, and the same28parts plus one explicitly identified purchased-tube reference. There is no mesh decimation. The3MF assemblies are viewing references, not ready-to-print plates; use the individual source parts for slicing. DOCUMENTED PURCHASED HARDWARE The source assembly guide specifies a10mmOD/9mmID carbon tube of at least460mm length. The illustrated assembly includes a separate dimensioned reference for that documented purchased tube. It is not an original supplied printable file and is not a printable replacement for carbon hardware. The source-only3MF deliberately omits it. Motor, folding propeller, battery, ESC, servos, radio system, pushrods and other installation hardware are not included or invented in the display. DIMENSIONS AND SCALE The digital display bounds are approximately1033.00 x1523.58 x178.00mm, expressed as length, span and height. The supplied guide quotes approximately1033mm length,1527mm span and177mm height. The nominal source length is used as an illustration layout datum; this is not a measurement or certification of a built aircraft. Source units are millimetres; no miniature scale is asserted. FORMATS AND VARIANTS All supplied formats and unique variants are retained, including four motor-mount options and the three FPV conversion components. FPV resources remain separately selectable rather than being mixed into the standard fuselage. Factory project references use opaque relative paths with retained facet-equivalent meshes. INI, slice, documentation and reference resources are preserved. Included G-code was treated as data and never executed. Native slicer GUI compatibility has not been certified. PRINTING ADVICE - UNTESTED No physical print has been completed for this publication. Treat all suggestions and supplied historical profiles as starting references. Inspect thin-wall aircraft sections, internal reinforcement, units and toolpaths in your slicer. Establish perimeter continuity, layer bonding, bed adhesion and cooling on small samples before committing to the complete airframe. The source documentation discusses thin-wall printing; avoid assuming that ordinary solid-part settings, an automatic mesh repair, or uniform infill will preserve that design intent. Included machine-specific G-code must not be run blindly. ASSEMBLY AND FINISH - UNTESTED Follow the retained source guides and dry-fit before adhesive. The supplied instructions describe joining printed sections and fine-tuning fit. Printer tolerances, glue gaps, alignment, hinges and hardware seats still require physical checks. The display is not a manufacturing jig and its clearances are not evidence of working controls. For the proposed exhibition finish, test compatible surface preparation, primer and thin paint coats on a sample. Keep attachment faces, access openings and hinge clearances functional. IMAGE AND TEST DISCLOSURE The gallery is a digital illustration built from the actual assembled geometry, physical paint/light shaders and local-PC AI-generated background context. Model geometry is protected rather than redrawn by AI. The purchased tube is clearly identified reference hardware; clear exhibition supports are photographic context and are not downloaded source components. Images are not evidence of a physical print, successful assembly, balance, powered operation or flight. Print, mechanical fit and flight status remain UNTESTED. CREDIT AND LICENSE The supplied guide identifies3DLabPrint. Original source notices and credits are retained. This resource is published free asCC0 under the uploader's explicit authorization, by the Tomás Piernas account; New opaque filenames do not imply that identical geometry cannot be recognized. TAGS sailplane, electric glider, printable airframe, RC aircraft, thin-wall printing, long wing, model kit, assembled reference, blue and yellow, native project, FPV conversion, untested, CC0 HASHTAGS #Sailplane #ElectricGlider #PrintableAircraft #RCAirframe #ScaleModelling #ThinWallPrinting #ModelKit #CC0

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Volkswagen Gol GTI — Four-Wheel Mesh Set

Four separate miniature wheels supplied together in one STL, with broad spokes and central hub details. The source labels the set for a Volkswagen Gol GTI; a particular hub fit is not verified. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Alfa Romeo — Radial-Spoke Wheel Design

A deep-barrel miniature wheel with numerous fine radial spokes and a raised centre hub. The source identifies an Alfa Romeo wheel, without a verified vehicle model or scale. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Alfa Romeo — Cross-Laced Wheel Design

A miniature wheel with a cylindrical outer barrel, dense crossed spoke layers and an open raised centre hub. The supplied filename refers to Alfa Romeo; this file contains a wheel rather than a car body. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Borrani RW3687-Style Wire Wheel

A Borrani RW3687-style wire-wheel design containing two separate circular wheel sections, a dense laced-spoke face, outer lip and drilled inner section. The sections require inspection and positioning before assembly. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Chevrolet Camaro — Classic Vehicle Mesh

A classic Chevrolet Camaro vehicle mesh with a coupe roof, long hood, front grille, rear deck, side contours and source wheel geometry. The supplied file says 1977, but exact model-year identification has not been verified. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Chevrolet Cruze 2015 — Wheel and Tyre Mesh

A Chevrolet Cruze 2015 source wheel-and-tyre mesh with a multi-spoke wheel face, central hub detail and directional tread texture represented in the geometry. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Ford Mustang Shelby GT500 Eleanor 1967 — Body Mesh

A Ford Mustang Shelby GT500 Eleanor 1967 source vehicle mesh with fastback roof, long hood, front grille, rear deck, side body contours and source wheel forms. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader. ADDITIONAL OBJ VEHICLE MESH An additional ZIP provides an original OBJ mesh identified in the source as Ford Mustang Shelby GT500 Eleanor 1967. It is supplied as a further modeling variant alongside the existing STL asset, with an English filename and source-file guide. Mesh topology, scale and exact equivalence between the two source versions have not been verified; use the variant that best suits your editing workflow.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Audi Q5 — Vehicle Body Mesh

An Audi Q5 vehicle body shell with an enclosed roof, open window apertures, side-door contours, front grille details and empty wheel arches. Wheels and a working chassis are not part of this single source mesh. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER Surface shading, emerald paint and lighting are illustrative; no missing wheels or glass were added. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader. SOURCE BODY VARIANTS An additional ZIP provides seven original STL variants labeled 0-8-r, 1-0-r, 1-2-r, 1-4-r, 1-6-r, 1-8-r and 2-0-r in the source. Those source labels are retained for identification; measured wall thicknesses and physical units have not been verified. Each native STL is renamed in English with an accompanying source-file guide. The earlier repaired body mesh remains available separately.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Ferrari 458 GT3 — Vehicle Mesh

A Ferrari 458 GT3 vehicle mesh with a low sports-car body, enclosed cockpit, front aerodynamic openings, rear wing and integrated wheel details. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Classic Compact Pickup — FI Source Vehicle Mesh

A classic compact pickup vehicle mesh with a two-door cab, open cargo bed, rectangular front grille, hood vents and source wheel forms. The original file is named FI; its make, model and year have not been established. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Ford GT-Style Wheel — 26 x 6 Source Design

A Ford GT-style miniature wheel with broad swept spokes, a raised hub and a deep stepped rim barrel. Although the source filename mentions Ford GT and 26 x 6, the actual geometry is a wheel, not a car body. Units and fit are not verified. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Classic Convertible Roadster — Police Source Mesh

A classic open-top convertible roadster vehicle mesh with two seats, windscreen, round front lamps, rear luggage rack and source wheels. The original file is labelled police roadster; a specific vehicle make and year have not been verified. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER The cover was generated locally in ComfyUI from our Blender rendering of the actual supplied geometry. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Ferrari 250 TR Tribute — Vehicle Mesh

A Ferrari 250 TR tribute vehicle mesh based on the source Monza homage design. It has an open two-seat cockpit, long sculpted hood, curved rear body and source wheel detail. It is a tribute design rather than a verified historical 250 TR reproduction. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER Paint, finish and lighting are illustrative; no missing wheels, glass or body panels were added. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Fiat 500 2012 — Vehicle Body Mesh

A Fiat 500 2012 body shell with a rounded roof and hatchback silhouette, open windows, front lamp contours and empty wheel arches. The source mesh contains the shell rather than a complete working vehicle. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER Paint, finish and lighting are illustrative; no missing wheels, glass or body panels were added. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Toyota Corolla — Vehicle Body Shell

A Toyota Corolla source body shell with a modern four-door sedan silhouette, sculpted front bumper, closed window surfaces and empty wheel arches. The source filename says 2002, but the model year is not verified and is deliberately omitted from the title. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER Paint, finish and lighting are illustrative; no missing wheels, glass or body panels were added. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Volkswagen Gol GTI 1995 — Vehicle Body Mesh

A Volkswagen Gol GTI 1995 source hatchback body mesh with a low-detail roof, front fascia, rear hatch, side-door forms and wheel-arch openings. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER Paint, finish and lighting are illustrative; no missing wheels, glass or body panels were added. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Volkswagen Passat Two-Door — Body Shell

A Volkswagen Passat two-door body shell with a long wedge-shaped profile, closed roof and windows, side-door outlines, front grille and wheel-arch openings. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER Paint, finish and lighting are illustrative; no missing wheels, glass or body panels were added. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Volkswagen SP2 Custom — Vehicle Body Mesh

A Volkswagen SP2 custom coupe body shell with a long front section, curved roof, rear body extension and open wheel arches. The supplied mesh represents the body, without wheels or a verified chassis. PACKAGE The complete ZIP includes the single original STL with an English filename and an English source-file guide. The separate STL supplies the same source geometry for inspection. Numerical coordinates and mesh data are preserved; there is no hidden additional chassis, motor or assembly hardware. PREPARATION AND USE Use as a starting point for miniature display builds, custom detailing, painting or a compatible scale-model project. Check units, dimensions, topology, thin features, disconnected parts, orientation, supports and physical fit before printing or assembly. No fixed scale, tested printing settings or working RC function are verified. ORIGINAL MESHOPIA COVER Paint, finish and lighting are illustrative; no missing wheels, glass or body panels were added. It shows the component in a miniature hobby workshop or scale-model diorama with a new finish and photographic lighting. Background vehicles, tyres, tools, supports and scenery are illustrative props and are not included. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Peterbilt 379 — Foldable Truck Model Kit

A foldable Peterbilt 379 tractor kit supplied as two STL files: a body, cab, bonnet, chassis and wheel folding layout, plus separate tall exhaust pieces. This package does not include a trailer or sleeper extension. The source meshes remain in their original unfolded arrangements. The assembled cover illustrates a static scale truck in a miniature freight-yard display; folding fit and mechanical movement have not been physically verified. COMPLETE SOURCE PACKAGE The English-named ZIP retains all original geometry bytes and supplied companion documents. The included file guide maps each renamed file to its source. Historical supplier documents are retained for source context; CC0 redistribution authorization has been separately confirmed by the uploader. Native print units must be checked before fabrication. No mesh is replaced by an AI-generated model. ON-DEMAND 3D VIEWS Choose each separate STL in the part selector. These are normalized, approximate lightweight display conversions, simplified for browser performance; they do not establish fabrication dimensions or replace the complete native files. Source mapping: - peterbilt-379-foldable-truck-kit-geometry-001.stl: separately selectable display mesh. - peterbilt-379-foldable-truck-kit-geometry-002.stl: separately selectable display mesh. PREPARATION AND ASSEMBLY Inspect source meshes in your preferred editor or slicer before use. Exact scale, dimensions, wall thickness, watertightness, printability, assembly tolerances and functional compatibility are untested. Use the original native files for fabrication preparation. No tested printing settings or RC performance are claimed. ORIGINAL MESHOPIA USE IMAGE An own locally generated, AI-assisted photorealistic image shows an illustrative assembled model in use, guided by inspected source geometry and assembly references. It is not evidence of a manufactured item or physical print. The scene, surface finishes and additional installation accessories are illustrative. Supplier pictures and geometry reference sheets are not published in the gallery. LICENSE Author and publisher: MESHOPIA. CC0 redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Tiger I — Foldable Tank Model Kit

A foldable Tiger I tank kit supplied as seven STL files: a four-strip caterpillar layout, single caterpillar strip, decorative spare-track links, folding hull with road-wheel details, two rear decoration files and a turret with a long gun barrel. The native meshes remain in their supplied unfolded printing arrangements. The assembled image illustrates the intended static tank display; it is not a verified folding simulation or a physically tested build. COMPLETE SOURCE PACKAGE The English-named ZIP retains all original geometry bytes and supplied companion documents. The included file guide maps each renamed file to its source. Historical supplier documents are retained for source context; CC0 redistribution authorization has been separately confirmed by the uploader. Native print units must be checked before fabrication. No mesh is replaced by an AI-generated model. ON-DEMAND 3D VIEWS Choose each separate STL in the part selector. These are normalized, approximate lightweight display conversions, simplified for browser performance; they do not establish fabrication dimensions or replace the complete native files. Source mapping: - tiger-i-foldable-tank-kit-geometry-001.stl: separately selectable display mesh. - tiger-i-foldable-tank-kit-geometry-002.stl: separately selectable display mesh. - tiger-i-foldable-tank-kit-geometry-003.stl: separately selectable display mesh. - tiger-i-foldable-tank-kit-geometry-004.stl: separately selectable display mesh. - tiger-i-foldable-tank-kit-geometry-005.stl: separately selectable display mesh. - tiger-i-foldable-tank-kit-geometry-006.stl: separately selectable display mesh. - tiger-i-foldable-tank-kit-geometry-007.stl: separately selectable display mesh. PREPARATION AND ASSEMBLY Inspect source meshes in your preferred editor or slicer before use. Exact scale, dimensions, wall thickness, watertightness, printability, assembly tolerances and functional compatibility are untested. Use the original native files for fabrication preparation. No tested printing settings or RC performance are claimed. ORIGINAL MESHOPIA USE IMAGE An own locally generated, AI-assisted photorealistic image shows an illustrative assembled model in use, guided by inspected source geometry and assembly references. It is not evidence of a manufactured item or physical print. The scene, surface finishes and additional installation accessories are illustrative. Supplier pictures and geometry reference sheets are not published in the gallery. LICENSE Author and publisher: MESHOPIA. CC0 redistribution authorization confirmed by the uploader.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Twin-Intake Trainer Jet - Complete Airframe and Printable Kit

OVERVIEW This twin-intake trainer-jet project includes a complete-airframe display representation, separate printable parts and editable slicer projects. It is a land-based aircraft model, not an amphibious aircraft. The original technical manual identifies the design as a T-2A Buckeye EDF project. Source geometry remains recognizable despite neutral public filenames; the publishing account does not claim original design authorship. CONTENTS AND VARIANTS The retained technical collection contains 53 distinct 3MF projects, 61 distinct STL files and a 27-page illustrated assembly manual. Duplicate source-folder slots are documented privately rather than mistaken for additional design variants. The complete-airframe STL is a reference representation; it does not replace the separate building parts or establish that the aircraft can be printed as one solid piece. All supplied geometry variants and project parameters remain available. NATIVE PROJECT PRESERVATION The 3MF projects include embedded meshes and PrusaSlicer configuration. Geometry arrays, faces, materials, build transforms, instance counts and bounds were independently compared after reopening with a second 3MF reader. Original printing settings and custom G-code are retained byte for byte; this is preservation, not validation for your printer. Optional source-file labels refer to embedded mesh provenance, including some source filenames not supplied separately. They are not missing external OPC model resources. Review settings in a compatible slicer before use; no G-code was executed or sent to a printer. SCALE AND DIMENSIONS The source manual states 1:10 scale, a 45.75-inch wingspan and a 46.4-inch length. These are source declarations, not dimensions physically verified by this publishing account. The complete-airframe geometry and individual project layouts may have different transforms or preparation contexts. Confirm units and measure a known feature in your slicer, then cross-check another dimension before scaling all mating parts together. Display normalization must not be used as a manufacturing dimension. ASSEMBLY DOCUMENTATION The original illustrated manual retains its technical names, credits, diagrams and operating notices. It describes fuselage sections, wing and tail joins, alignment pins, hatches, fan installation, control surfaces and optional landing-gear hardware. Its earlier finished-aircraft photographs are source references, not a newly documented print by this account. Read the entire manual before planning materials, tools or hardware, and dry-fit the joints before bonding. PRINT PREPARATION - UNTESTED The source project discusses LW-PLA and printer-specific preparation. Those settings are not universal recommendations. Inspect wall thickness, hollow sections, mesh condition, thin edges, control clearances, hatch fit and connection surfaces. Check each part against your build volume and nozzle capability. Test a representative joint and thin section before committing to the whole aircraft. Existing custom start/end G-code and machine identifiers must be checked against your own firmware and printer; retaining them does not certify compatibility. HARDWARE AND FINISH The source documentation describes an 80 mm electric ducted fan and additional hardware. No fan, battery, electronics, retracts, fasteners, tubes or tools are supplied as physical goods. Hardware suitability, balance, structural strength and flight performance have not been tested by this publishing account. Paint and adhesive can change clearance, mass and balance. Use thin finish coats and recheck joints after finishing. A rendered display does not demonstrate airworthiness or a successful physical build. RIGHTS AND TRANSPARENCY Files are offered free under CC0 according to the uploader’s express redistribution authorization. Necessary technical identifiers and legitimate source credits remain. Opaque filenames do not make the original geometry anonymous. Preserve the source documents for technical context and assess their applicability to your own equipment. No physical print or flight certification is implied. #TrainerJet #AircraftModel #EDF #ModelKit #ScaleModel #LWPLA #3MF #STL #3DPrinting #CC0 IMAGE DISCLOSURE Local PC ComfyUI/Qwen generated the workshop surroundings. The painted source-model render and original display base were protected in the final composite. The public lightweight 3D view is a simplified technical display; full STL and project files remain in the download.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Three-Spool Engine - Cutaway Display Kit

OVERVIEW This three-spool engine kit is an educational cutaway display project with an intended electric-motor drive and planetary gearing between its spools. The finished illustration shows the fan, exposed internal stages, central shaft, casing sections and rolling display support in a proposed metallic finish. The supplied design notes explain that the spool rotation order intentionally differs from the represented full-size engine. The publishing account has not tested a physical print, assembly fit or powered movement. DOWNLOAD CONTENTS The ZIP preserves all 111 supplied STL variants, the OBJ viewing copy, 20 technical image references, an English geometry inventory, a file manifest and three PDFs. The PDFs comprise a three-page preparation and hardware guide, two stand-drawing sheets and eleven engine-assembly sheets. Drawing geometry, sections, dimensions, callouts, hardware tables, projection symbols, scale labels and sheet numbers are retained. Author/export identity fields and the earlier identifying title blocks are replaced. Every public filename is an independent neutral identifier; no earlier-filename correspondence is included. GEOMETRY AND ASSEMBLY STL numerical facet data and OBJ geometric data retain their supplied coordinates and connectivity. Alternate brim/non-brim, support and section variants are separate resources, not a quantity of pieces required for one assembly. The STL parts are not all oriented for printing. Use the current inventory, drawings and selected geometry together before choosing a build sequence. Inspect thin blades, stators, shafts, bearing seats, couplings and shell edges. Work on copies when repairing, thickening, splitting or resizing. Small rotor/stator gaps require careful fitting and concentric alignment. PRINTING VALUES IN THE SUPPLIED NOTES - UNTESTED HERE The design notes describe most parts at 0.15 mm layers, a 0.4 mm nozzle and approximately 0.48 mm extrusion width. They report around 1.5 kg of filament for a complete model and a 240 x 270 mm bed that accommodated the largest part. These are retained source-note values, not validated settings or a certified minimum printer size. The notes describe overhangs around 55 degrees, bridges around 1.5 mm and one support-requiring part marked in the drawings. Confirm that marking, the actual orientation and your printer/material behaviour. The second-spool disc variants include a brim option for blade adhesion. Test a representative fragile section and fit before committing to the full set. HARDWARE AND DOCUMENTATION The guide transcribes the engine drawing BOM for bearings, screws, nuts and round aluminium tubing. The stand sheets retain the separate support and tubing requirements. The notes describe a geared DC motor, with 12 V and about 100 RPM offered as a design recommendation, plus a PWM controller, power jack, wiring and two-pin headers. Match the selected hardware to the actual drawings and mounts. Hardware, electrical parts, adhesives and tools are external components rather than extra printable resources. Technical photos include unpainted builds and close-ups for assembly reference; they are retained inside the download rather than used as the finished cover. DIMENSIONS, SCALE AND FINISH The technical drawings retain their A1 layout and 1:1 plotting labels. Those marks describe the drawing output and do not independently certify the STL unit system or a real-aircraft miniature scale. Confirm a known dimension and print scaling before measuring a paper drawing. Confirm slicer units, wall thickness, build volume and bearing fits. Uniform resize percentage is target length divided by current measured length multiplied by 100. Purchased hardware does not scale with the mesh. Recheck all clearances after resizing. Prepare a primer/paint sample, preserve fine blades while sanding and keep paint or adhesive away from fit-critical seats and moving gaps. Metallic surfaces and the dark support are a proposed display finish. IMAGE AND RIGHTS The cover is an existing locally generated ComfyUI/Qwen presentation checked against the supplied assembled-engine references. It is an AI-assisted finished-display illustration, not evidence of a physical print made or tested by the publisher. Background scenery is illustrative. Free CC0 redistribution follows the uploader's explicit authorization. The publishing account does not claim original design authorship or manufacturer endorsement. Private originals remain preserved separately. #JetEngine #CutawayModel #ThreeSpool #ModelMaking #3DPrinting #STL #CC0

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Four-Engine Widebody Airliner - Display Kit

OVERVIEW This four-engine widebody airliner kit is a static scale-model project with a short upper-deck hump, swept wings, four underslung engine nacelles, separate landing-gear details and a display support. Its finished illustration presents an upright assembled model in white, pale grey and dark blue. The downloadable component geometry remains the supplied kit, not a newly certified aircraft assembly or a tested flying model. DOWNLOAD CONTENTS The complete ZIP retains all 24 supplied STL entries, the OBJ component-layout viewing copy, four English technical instruction images, a one-page livery decal PDF, an English preparation guide, a geometry inventory, the current presentation image, a current integrity manifest and CC0 information. STL numerical triangle records are retained without surface decimation. Each filename is an independent neutral identifier. The public inventory contains only current filenames, sizes and integrity hashes; it does not include earlier-name correspondence or source paths. Five earlier publisher presentation photographs are retained privately and replaced publicly by the locally generated assembled cover. ASSEMBLY REFERENCE The exploded instruction sheet shows the relationships between the fuselage sections, connecting pin, inner and outer wing sections, horizontal and vertical tail surfaces, engine nacelles, fan inserts and landing-gear components. Use it together with the current geometry inventory to identify compatible pieces and orientation. The supplied stand is retained as geometry; decorative wooden bases, tools and scenery in an illustration are not additional supplied hardware. Check each component in a slicer, test critical joints and dry-fit the assembly before committing adhesive. The component-layout OBJ does not establish an assembled engine/gear pose, fitted joints or a complete printable part quantity. SUPPLIED PRINTING NOTES - UNTESTED HERE The technical reference lists 0.2 mm layer height, two outer walls/perimeters, three bottom layers, five top layers, zero infill except 25 percent for the stand, no slicer-generated supports, a five-second minimum layer time and the Classic perimeter generator rather than Arachne. These are preserved source notes, not settings tested by the publishing account. Nozzle, material, temperature and machine compatibility must be selected for the actual printer and geometry. Inspect the provided built-in support regions before deciding whether any additional support is necessary. BUILT-IN SUPPORT REMOVAL The antenna diagram shows a cut along the back of the antenna followed by a cut parallel to the fuselage. Distinguish sacrificial support from the antenna itself before using cutters. The fan diagram shows cutting the connecting rods and then separating the built-in support pieces from the fan insert. Preserve the actual fan blades, shaft and nacelle edges. Remove small support sections gradually and check the supplied diagrams rather than treating every thin feature as disposable. Test the process on a representative part first. SCALE, FINISH AND DECALS The retained decal sheet preserves its original paper size, orientation and every visible decal pixel. Airline markings and registration characters are functional livery artwork, not original-design authorship claims. Check a known dimension before selecting print scale, disable automatic fit-to-page where accurate dimensions matter and test decal alignment against a printed component. No physical scale is certified solely from an earlier filename. For uniform resizing, use target measured dimension divided by current measured dimension multiplied by 100, then recheck wall thickness, antennas, gear details and fit. Prime a sample, mask established boundaries and avoid filling fine detail with paint. The cover uses a proposed unbranded white/grey/blue finish; the optional decal sheet offers a separate supplied finish choice. IMAGE AND RIGHTS The cover is prepared on this PC using local ComfyUI/Qwen and compared with the assembled source references. It is an AI-assisted presentation, not a photograph of a publisher-tested print. Source publisher footer artwork is removed from the public instruction derivatives while their technical content is retained. Geometry, original files and private preservation receipts remain archived. The uploader explicitly authorized free CC0 redistribution. Original design authorship is not claimed by the publishing account; manufacturer or airline endorsement is not implied. #Airliner #Widebody #AircraftModel #ScaleModel #ModelMaking #3DPrinting #STL #CC0

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Red Fin Widebody Airliner - Full Kit and Assembled Display

OVERVIEW This widebody passenger-aircraft kit includes a complete assembled display and the retained printable source parts. The presentation has a white fuselage, light-grey wings, a red fin, dark tyres and fan surfaces, and dark cockpit openings produced by painting the existing internal backing. The finish is illustrative, not a measured historical livery. No new glazing, aircraft surface or landing-gear shape was invented for the image. SOURCE ASSEMBLY The display uses 35 existing STL part slots in their shared source coordinates. Paired components use mirrored instances of the supplied geometry. The twelve main wheels follow the three axle rows measured in the supplied gear. Together these make 64 instances, with 3,692,092 source triangles in the full-resolution assembled OBJ. A rigid axis conversion and shared viewing scale do not remodel the parts. All 36 original STL slots remain in the archive: the alternative fuselage cap is retained separately rather than superimposed on the display. DOWNLOAD CONTENTS The complete ZIP includes all 36 source STL files, a full-resolution assembled OBJ with its MTL appearance file, a lighter assembled OBJ for browsing, the earlier parts-view OBJ as an alternative, and a neutral-name assembly inventory. Two editable native vector decal documents and two PDF decal sheets are retained, together with the source electronics schematic, Arduino sketch, source-reference video, English guide, checksum inventory, CC0 information and current illustration. Existing artwork credits remain visible. The publishing account does not claim original design authorship. VIEWING AND NATIVE DOCUMENTS The public OBJ is an optimized 253,782-triangle assembled viewing copy, not the full-resolution printing source. Its plain technical material can differ from the painted cover. Use the full-resolution assembly or individual STL parts when preparing a build, after inspecting their suitability. The native vector documents were independently reopened; their artwork, fonts, embedded resources and page layouts were preserved. Native editing still requires a compatible application. SCALE AND VARIANTS Decal artwork contains source-labelled 1:100 and 1:200 layouts. One alternative cap carries a source 1:120 label; that does not establish a complete second aircraft at that scale. The publishing account has not physically verified the geometry units or a printed scale. The full assembly retains source-coordinate magnitude after axis conversion; the small public viewing copy is normalized for display. Confirm a known dimension, calculate a uniform resize factor and recheck another dimension, thin features and clearances before printing or applying decals. PRINT PREPARATION — UNTESTED Inspect units, build volume, mesh condition, wall thickness, overlaps and source mating surfaces. Check the nine fuselage sections, wing joins, fine mechanisms, fin and elevator edges, landing struts, wheel holes and fan blades. A convincing illustration or responsive viewer does not prove watertightness, fit, strength or one-piece printability. Work on copies when repairing, thickening, hollowing or separating parts. The source-coordinate assembly shows a proposed pose, not a physically validated assembly manual. CONDITIONAL PRINTING AND FINISHING Resin layers around 0.03–0.05 mm or FDM layers around 0.12–0.20 mm are possible starting ranges only if the measured details and equipment support them. No tested temperature, exposure, speed, infill, support placement or joining tolerance is supplied. Protect exterior surfaces and delicate edges, test a representative joint and fragile detail first, and follow printer and material guidance for drainage, curing and support removal. Test primer and decal handling on samples; apply thin paint coats and allow clearances for paint and adhesive. OPTIONAL ELECTRONICS AND SOURCE MEDIA The source sketch and schematic describe optional lighting; the sketch retains its Adafruit_NeoPixel dependency and requires an appropriate ESP32 environment. It has not been compiled, flashed or tested for this listing. Electronics, fasteners, wiring and tools are not supplied hardware. The source-reference clip shows earlier modelling and finished examples; it is not a verified print or electronics test by this publishing account. Source reference photographs are replaced by the new illustration. IMAGE AND RIGHTS Local ComfyUI/Qwen on this PC creates only the workshop surroundings. The actual assembled source render and wheel-contacting display plinth remain protected in the final composite. Public filenames and dependencies use neutral identifiers; geometry, artwork, legitimate credits or technical content may still identify a design. Originals remain unchanged. CC0 redistribution follows the uploader’s express authorization. #Airliner #PassengerAircraft #ScaleModel #ModelKit #ModelMaking #3DPrinting #CC0

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar