Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

1 modelo etiquetado · Página 1 de 1

#z offset

Descubre modelos 3D etiquetados como z offset y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de CR Touch adapter for Sprite Extruder 2.0

CR Touch adapter for Sprite Extruder 2.0

CR touch adapter for sprit extruder 2.0 Purpose This model is a revised version of a previous design intended to fix the Z offset by -3mm to compensate for the sensor placement. Practical Uses It is designed to serve as an adapter for a CR Touch sensor when used with a Sprite Extruder 2.0. Included Parts The model includes the CR touch - V2.stl file. This model requires additional hardware: two M3 bolts and two M3 nuts. Printing and Assembly Guidance Recommended print settings are a speed of 30mm/s, a 0.12mm layer height, 50% infill, and 3 to 5 walls. The author notes that while they printed in PLA, using ABS or ASA would increase strength. If tolerances are not sufficient, it is suggested to print at 105% scale.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar