Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#sprite extruder

Descubre modelos 3D etiquetados como sprite extruder y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de CR Touch adapter for Sprite Extruder 2.0

CR Touch adapter for Sprite Extruder 2.0

CR touch adapter for sprit extruder 2.0 Purpose This model is a revised version of a previous design intended to fix the Z offset by -3mm to compensate for the sensor placement. Practical Uses It is designed to serve as an adapter for a CR Touch sensor when used with a Sprite Extruder 2.0. Included Parts The model includes the CR touch - V2.stl file. This model requires additional hardware: two M3 bolts and two M3 nuts. Printing and Assembly Guidance Recommended print settings are a speed of 30mm/s, a 0.12mm layer height, 50% infill, and 3 to 5 walls. The author notes that while they printed in PLA, using ABS or ASA would increase strength. If tolerances are not sufficient, it is suggested to print at 105% scale.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Creality CR-M4 Sprite extruder plate

Creality CR-M4 Sprite extruder plate

This model is a replacement plate designed for the Creality CR-M4 Sprite extruder. It was created as an alternative to the original component, which may be difficult to source individually. Purpose The plate serves as a mounting component for the Sprite extruder on the CR-M4. This specific version features integrated space to allow for improved airflow. Practical Uses This part is intended for users whose original extruder plates have been damaged or bent. Because of its design, it can also be remixed to accommodate custom extruders. Included Parts The provided files include the Sprite plate CRM4 project files (.3mf) and a specific sliced file (.bgcode). Printing and Assembly Guidance Assembly is achieved by mounting the plate to the X carriage using the original four screws. Additionally, three screws are required to secure the entire Sprite extruder assembly. The author recommends printing this model using ABS or PETG materials.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar