Información del modelo
Descripción
CR touch adapter for sprit extruder 2.0
Purpose
This model is a revised version of a previous design intended to fix the Z offset by -3mm to compensate for the sensor placement.
Practical Uses
It is designed to serve as an adapter for a CR Touch sensor when used with a Sprite Extruder 2.0.
Included Parts
The model includes the CR touch - V2.stl file. This model requires additional hardware: two M3 bolts and two M3 nuts.
Printing and Assembly Guidance
Recommended print settings are a speed of 30mm/s, a 0.12mm layer height, 50% infill, and 3 to 5 walls. The author notes that while they printed in PLA, using ABS or ASA would increase strength. If tolerances are not sufficient, it is suggested to print at 105% scale.
Texto original del autor en Printables
<p>Print settings: 30mm/s, 0.12mm layer height, 50% infill and 3 - 5 walls. I have printed in PLA but printing with ABS or ASA would increase strength. Requires additional hardware: M3 bolt and nut X2. If tolerance not great print at 105%.</p>
Preguntas y aportaciones