Meshopia · EnglishEnglish
MESHOPIA

4 modelos etiquetados

#wheel

Descubre modelos 3D etiquetados como wheel y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Rueda TurboFun para drift RC a escala 1:10

TurboFun Wheel for 1:10 scale RC drifting

TurboFun Wheel identified by the source for 1:10 scale drift modeling. The available documentation is limited to the design name and its usage tag; it does not confirm hex diameter, offset, width, or compatible tires. These measurements must be obtained from the file and compared with the car before printing. Preparation, compatibility and printing Maintain the original scale during the first check. Check the center hub, the axle pitch, and the clearance from the suspension arms. Sharing a 1:10 scale does not guarantee compatibility between wheels and vehicles. No material, infill, or strength testing data is available; treat the first print as a dimensional check.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Bmw CE04 rear wheel logo adapter

Bmw CE04 rear wheel logo adapter

Author Description · Vlad Dogarescu (Printables) BMW CE 04 Wheel Logo Adapter A simple 3D-printable adapter that allows you to install a 68 mm BMW wheel emblem on the BMW CE 04, giving the wheels a much more finished, classic BMW look. I originally designed this for my own CE 04 because I felt the stock wheel hubs looked a little too plain. After a few hours of 3D modeling, the first print worked perfectly. What you need - The included 3D-printed adapter - 68 mm BMW wheel emblem/logo - Suitable screws/fasteners for mounting Standard 68 mm BMW emblems are widely available online and are relatively inexpensive. Printing The model is straightforward to print and does not require any particularly exotic settings or materials. For something mounted this close to the wheel and exposed to heat, water and sunlight, I recommend PETG, ASA or ABS rather than PLA. Installation The adapter mounts to the existing wheel hub and provides a holder for the\n68 mm BMW emblem. No permanent modification to the scooter is required. Optional: Floating BMW Logo You can also use a 68 mm floating/self-leveling BMW wheel emblem, which keeps the BMW logo upright while the wheel rotates. These look great, but they are considerably more expensive than standard emblems. Compatibility Designed specifically for the BMW CE 04. If you print it, I'd love to see a photo of how it looks on your CE 04! Source: https://www.printables.com/model/1809889-bmw-ce04-rear-wheel-logo-adapter

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Buje de rueda KamAZ Dakar RC para hexágono de 12 mm

KamAZ Dakar RC wheel hub for 12 mm hexagon

Wheel hub identified as KamAZ Dakar RC for mounting on RC Trophy axles with a 12 mm hexagon. The hexagon measurement is the compatibility data provided by the source; it does not confirm axle length, pin diameter, wheel offset, or nut type. Preparation, compatibility, and printing Compare the hexagonal seat and the fastening space with your axle and rim. The hexagon must transmit movement without spinning freely or fitting under excessive pressure. Prepare a dimensional test and verify that there is enough thread left for the nut. No material or tested strength is documented; check the hub after the first tests for any signs of play or deformation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Hexágonos de rueda V2 para crawler Hornet CyberBrick

Wheel Hexagons V2 for Hornet CyberBrick crawler

Second version of the wheel hexagon adapters for the Hornet crawler based on CyberBrick. The author indicates that four M8 nuts are required for the assembly. The download contains the printed parts and does not include that hardware. Not all compatible axle or rim measurements are specified in the text. Preparation, compatibility, and printing Check the Hornet variant, the nut housing, and the rim fit before printing. Avoid deforming the housing when inserting the nuts and verify that the wheels rotate without rubbing. No material, layer, or infill are documented. After assembly, check retention, clearance, and concentricity before using the vehicle.

Technology
Sin probar
material
—
Difficulty
Sin especificar