2 modelos etiquetados · Página 1 de 1

#stack

Descubre modelos 3D etiquetados como stack y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

ElectrónicaGratis

FC adapter 26.5mm to 20mm

Fc adapter 26,5 mm to 20mm Purpose This model is an adapter designed for an FC (Flight Controller) stack. It is intended for use in scenarios where the stack dimensions are smaller than the drone frame size. Practical Uses It serves as a mounting solution to bridge the gap between different stack mounting standards, specifically adapting a 26.5mm mounting pattern to a 20mm requirement within an FPV drone setup. Included Parts - Adaptador fc 26.5mm to 20mm.stl Printing/Assembly Guidance Not provided.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

FPV Toothpick battery mount and stack

FPV Toothpick battery mount and stack designed to mount two whoop batteries and provide M2 screws for a stack. 1. Purpose: This model serves as a battery mount for toothpick-style FPV drones and includes components for stack mounting. 2. Practical Uses: It is used to secure two whoop batteries and provides integrated support for M2x25mm Nylon or Acrylic screws. 3. Included Parts: The file set includes Toothpick Battery Mount.STL, O3-AirUnit-Spacer.STL, O3-AirUnit-Top-Spacer.STL, and O3-AirUnit-to-frame.STL. 4. Printing/Assembly Guidance: The author reports that when using clear resin, the material bleeds through and can cause blobs at the bottom part of the threads, requiring reduced tolerances. The author has printed the model in Syria Tech Blue/Black and suggests that Syria Tech Sculpt, an opaque high-strength resin, is a preferred material for future prints.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar