Información del modelo
Descripción
FPV Toothpick battery mount and stack designed to mount two whoop batteries and provide M2 screws for a stack. 1. Purpose: This model serves as a battery mount for toothpick-style FPV drones and includes components for stack mounting. 2. Practical Uses: It is used to secure two whoop batteries and provides integrated support for M2x25mm Nylon or Acrylic screws. 3. Included Parts: The file set includes Toothpick Battery Mount.STL, O3-AirUnit-Spacer.STL, O3-AirUnit-Top-Spacer.STL, and O3-AirUnit-to-frame.STL. 4. Printing/Assembly Guidance: The author reports that when using clear resin, the material bleeds through and can cause blobs at the bottom part of the threads, requiring reduced tolerances. The author has printed the model in Syria Tech Blue/Black and suggests that Syria Tech Sculpt, an opaque high-strength resin, is a preferred material for future prints.
Texto original del autor en Printables
<p>I designed this first as a battery mount, but later added M2 screws since finding M2x25mm Nylon or Acrylic screws can be challenging. I've only printed it in Syria Tech Blue/Black so far. The clear resin bleeds through a lot and blobs the bottom part of the thread, so tolerances have to be reduced. I hope to print in Syria Tech Sculpt since this is an opaque resin with still high strength.</p><p>See it in action here: </p><figure class="media"><oembed url="https://youtu.be/tMr6sFglMGo"></oembed></figure>
Preguntas y aportaciones