2 modelos etiquetados · Página 1 de 1

#freecad

Descubre modelos 3D etiquetados como freecad y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

ElectrónicaGratis

XT60H-M Screwable Adapter with Editable FreeCAD File

XT60H-M Screwable Adapter with Editable FreeCAD File Purpose This compact screwable adapter is designed specifically to hold an XT60H-M connector. It features two mounting holes, allowing the adapter to be fastened to a panel, plate, or custom project. Practical Uses This part is suitable for DIY builds, custom housings, and adapter plates where a secure, mounted XT60H-M connection is required. Included Parts - XT60-Male-Adapter.stl - XT60-Male-Adapter.fcstd (Editable FreeCAD file) Printing and Assembly Guidance The connector is intended to be fixed into the printed part using super glue or a similar adhesive, as it does not utilize a mechanical snap fit. Note that this design is intended specifically for the XT60H-M variant and has not been tested with other XT60 variants or similar connectors. If necessary, dimensions can be adjusted using the provided FreeCAD file.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Spektrum AR637T Receiver Holder with Antenna Mount

Purpose This is a slip-in mount designed for the Spektrum AR637T receiver. It allows dual antennas to be routed through one of four holes each to achieve a required 90-degree angle between them. Practical Uses The holes are sized for PTFE tubing. The author suggests that adding 0.2 mm to the tubing diameter when adjusting hole sizes provides a good fit. Included Parts - Spektrum AR637T RC Rcvr Antenna Mount-AntennaMountBody.stl - Spektrum AR637T RC Rcvr Antenna Mount.fcstd Printing and Assembly Guidance The author printed this using white ASA on a Bambu X1C with BambuStudio's 0.16 Optimal setting and normal support. The model should be placed with the hole end down on the build plate. Note that cleaning support material from the holes may take a few minutes.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar