Información del modelo
Descripción
Purpose: These brackets are designed to hold a Raspberry Pi and a Raspberry Pi camera on the Lego 42099 (4X4 X-treme Off-Roader). The setup is intended for remote control driving, allowing for WiFi control and a remote video feed to address the limited range of Bluetooth control via the official Lego app. 1
Practical Uses: The author suggests mounting the Raspberry Pi camera on the roof for better visibility and placing the Raspberry Pi inside the cabin. The design is compatible with Raspberry Pi model 3B+ and Raspberry Pi camera rev1.4.
Included Parts
- CameraBracket.stl
- PiHolder A.stl
- PiHolder B.stl
Texto original del autor en Printables
<p>Mounts a Raspberry Pi camera on the roof (sadly putting it inside the cabin leads to very poor visibility) and a Raspberry Pi inside the cabin. </p><p> </p><p>Works with:</p><ul><li>Raspberry Pi model 3B+</li><li>Raspberry Pi camera rev1.4</li></ul><p>Might work with other revisions if the dimensions are similar enough, but I didn't try.</p><p> </p><p>Designed for remote control driving. The bluetooth control via the official Lego app has very poor range. With this mod you can control it over WiFi using the Raspberry Pi and get remote video feed.</p><p> </p><p>(Software TBD)</p><p> </p><p>Credits to the 42099 model on Mecabricks which helped me get the right dimensions.</p><p> </p>
Preguntas y aportaciones