Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

4 modelos etiquetados

#raspberry pi

Descubre modelos 3D etiquetados como raspberry pi y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Bed Handle CR-10/Ender 3 With Camera Mount

Bed Handle CR-10/Ender 3 With Camera Mount

Bed handle and camera case for Ender 3 and CR-10 using a Raspberry Pi camera. The author states the orientation shown is best for a good print, though it can be printed horizontally at a higher print cost due to more supports. Print Settings: - Printer brand: Creality - Printer: CR-10 - Rafts: No - Supports: Yes - Resolution: .2 - Infill: 45 The author reports using Priline Gray PETG filament. Weight and print time reports: - CR-10: 62g - 11h20 - Ender 3: 51g - 9h35 - Camera case for bed handle Cr-10/Ender3 (for M6 and M5 screws): Both parts 17g - 2h35

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Lego 42099 Raspberry Pi and Camera mounts

Lego 42099 Raspberry Pi and Camera mounts

Brackets to hold a Raspberry Pi and a Raspberry Pi camera on the Lego 42099 (4X4 X-treme Off-Roader). The author mounts the Raspberry Pi camera on the roof, noting that placing it inside the cabin leads to very poor visibility, and mounts the Raspberry Pi inside the cabin. The author states it works with Raspberry Pi model 3B+ and Raspberry Pi camera rev1.4, adding that it might work with other revisions if dimensions are similar enough, though they did not try. The author notes this mod allows control over WiFi using the Raspberry Pi to get a remote video feed, as Bluetooth control via the official Lego app has very poor range. Software is TBD. The author credits the 42099 model on Mecabricks for helping obtain the correct dimensions. Files: - CameraBracket.stl - PiHolder A.stl - PiHolder B.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Prusa I3 MK3S+ Cabinet for Raspberry Pi, DC Converter, and LED Light Bar Switch

Prusa I3 MK3S+ Cabinet for Raspberry Pi, DC Converter, and LED Light Bar Switch

A cabinet designed for the Prusa I3 MK3S+ to house a Raspberry Pi, a DC converter, and a switch for an LED light bar. The author reports drawing 24V from the input of the Einsy RAMBo "MK3S+" Mainboard to the DC converter and the LED light bar, with the DC converter adjusted to output 5.1V for the Raspberry Pi running OctoPrint. Files: - Prusa Raspberry DC konverter kabinet.stl - Prusa Raspberry DC konverter kabinet Cover.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar