4 modelos etiquetados · Página 1 de 1

#model aircraft

Descubre modelos 3D etiquetados como model aircraft y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

RC & MecánicaGratis

Whisbang RC whistling bombs

Whisbang is a whistling accessory for RC activities. Its hollow body and openings are intended to produce sound as it moves through the air; it has no explosive function. POSSIBLE USES - Add an acoustic effect to a controlled RC demonstration. - Explore airflow and resonant cavities in a hobby model. INCLUDED FILES - The supplied STL geometry. - The accompanying PDF document. GENERAL PRINTING SUGGESTIONS PLA is a straightforward material for an initial trial. Consider PETG, ASA or another material only when the intended environment requires different heat resistance, outdoor durability or toughness. A 0.20 mm layer height is a general starting point; a finer layer may improve surface detail. Choose a stable printing face and inspect overhangs, bridges and support requirements in the slicer. Print a sample or fit test before making multiple copies. CHECK BEFORE USE Do not add pyrotechnics or explosive loads. Avoid dropping or launching the accessory toward people, animals or property, and follow the rules of the RC flying field. The imported listing indicates FDM with PLA or PETG; these general suggestions must be checked against the actual model, printer and slicer profile. IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.

Tecnología: FDM
Material: PLA, PETG
Dificultad: Intermedia

RC & MecánicaGratis

RC Servo Clevis

RC SERVO CLEVIS Purpose This model is a clevis designed for use with a 1.2mm pin and push rod. It is intended for applications involving SG90 servos or control horns. Practical Uses This component is designed for RC plane assembly, specifically for connecting control surfaces via servo linkages. Included Parts - 1 x rc clevis 1.2mm.stl Printing and Assembly Guidance The author recommends using PETG as the printing material. For optimal results, use a layer height of 0.2mm. According to the author, printing time is approximately 4 minutes for one piece or 25 minutes for ten pieces. Attribution: tahlo

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Piper Pawnee — RC Aircraft Kit, Factory Projects and Native Part Views

A Pawnee-inspired propeller aircraft with a low-mounted wing and raised cockpit. The recovered archive includes eighty-two STL files; the archive reports an unexpected end and one unreadable decal PDF, so this is explicitly a recovered partial package. PACKAGE CONTENTS 96 GCODE files, 2 PDF files, 49 FACTORY files, 4 SLICE files, 82 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA. ADDITIONAL RECOVERED NATIVE PROJECTS An additional English-named source ZIP preserves four original Simplify3D FACTORY projects for the Dusty spinner bottom and wing sections L7, R7 and RL6, plus the supplied standalone spinner-bottom STL. All five native source files are preserved byte for byte with a filename mapping guide. These supplement the earlier recovered kit; they do not prove that every item from the damaged original archive has been recovered. ON-DEMAND PART INSPECTION Six individually selectable STL views preserve the native embedded geometry recovered from the four FACTORY projects and the supplied standalone STL. Native coordinates are unchanged. Related spinner versions are retained separately because their source bytes differ. Project settings, print profiles, units, fit, strength and flight performance remain unverified. Use compatible Simplify3D software for the native project settings and review all machine instructions before use. Author and publisher: MESHOPIA. CC0 with confirmed redistribution authorization. OUR UPDATED MESHOPIA IMAGE Our own locally generated ComfyUI photorealistic hobby-workshop cover follows the supplied Pawnee-style airframe reference with a new pale-blue and ivory finish. The propeller is temporarily removed in this finishing presentation; consult the native parts for the supplied propeller and spinner geometry. Localized edits are confined to the nose presentation. This is an illustrative finishing scene, not a photograph of a manufactured or tested prototype.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

Euphoria 1.5 — Multipart RC Aircraft Kit

Euphoria 1.5 is a multipart aircraft source kit with a straight wing, a compact front fuselage pod, a forward propeller arrangement and a slender exposed tail boom in the assembled reference. The 17 supplied original STL files contain wing sections, wingtips, aileron-related pieces, canopy, tail and elevator parts, four fuselage-pod sections, motor-cover geometry and connectors. The name 1.5 is retained as the supplied project name; it is not a verified 1:5 scale declaration. Every native STL is separately selectable for on-demand 3D inspection and retained unchanged in the complete English-named package with filename mapping. The parts are supplied in their native printing layouts, not as an automatically assembled airframe. A tail-boom tube, propeller, linkages, fasteners, adhesives, motor, battery, servos and control electronics may be required separately; the STL files do not establish a complete set of working flight hardware. Printing, component fit, airworthiness, balance, strength and flight performance are untested. The new photorealistic cover illustrates miniature finishing on an outdoor hobby table, based on an inspected assembled source reference with the thin open tail-boom construction retained. Digital files only. NATIVE SOURCE CONTENTS English-named ZIP with supplied native geometry, technical material and texture companions, and an English filename mapping guide. Original geometry bytes are preserved. Native software and renderer compatibility are untested; texture paths may need relinking using the mapping. Technical textures are package assets, not public gallery photos. PREPARATION AND USE Digital model only. Physical scale, printability, wall thickness, watertightness, part separation, fit, strength and mechanical or RC operation have not been tested. Inspect the source in appropriate modelling or slicing software before fabrication. No verified printer profile or working drivetrain is claimed. ORIGINAL MESHOPIA PRESENTATION The cover is a new AI-assisted photorealistic illustration generated locally in ComfyUI using our inspected render of the supplied geometry. It shows a scale-model hobby finishing scene with a new finish, photographic lighting and environment. It does not document a manufactured or tested prototype. Hands, brushes, paint jars, bench and background props are illustrative and are not included. LICENSE AND AUTHOR Author and publisher: MESHOPIA. CC0 with the collection owner’s confirmed authorization.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar