Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#clevis

Descubre modelos 3D etiquetados como clevis y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de RC Airplane Clevis 25mm Length 4mm Thickness 1.5mm Hole

RC Airplane Clevis 25mm Length 4mm Thickness 1.5mm Hole

RC airplane clevis (chape) with a length of 25mm and a thickness of 4mm. This component is designed to facilitate connections within a remote-controlled aircraft setup. Purpose The purpose of this model is to serve as a clevis for RC airplanes, providing a mechanical connection point between control components. Practical Uses This part is used to connect a threaded rod via a 1.5mm hole and to attach a servo arm (guignol) using a 2mm hole. Included Parts The model is provided in two STL files: - Chape-AvionRC-L25-Ep4-trou1.5 v1.stl - Chape-AvionRC-L25-Ep4-trou1.5 v2.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC Servo Clevis

RC Servo Clevis

RC SERVO CLEVIS Purpose This model is a clevis designed for use with a 1.2mm pin and push rod. It is intended for applications involving SG90 servos or control horns. Practical Uses This component is designed for RC plane assembly, specifically for connecting control surfaces via servo linkages. Included Parts - 1 x rc clevis 1.2mm.stl Printing and Assembly Guidance The author recommends using PETG as the printing material. For optimal results, use a layer height of 0.2mm. According to the author, printing time is approximately 4 minutes for one piece or 25 minutes for ten pieces. Attribution: tahlo

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar