Información del modelo
Descripción
LGX Lite CAN Side Mount
Purpose
This model is designed to provide a side mounting solution for CAN toolhead boards to the LGX Lite extruder. It is specifically intended for NEMA 17 sized boards.
Practical Uses
It is compatible with various CAN modules, including Huvud, EBB36, and FLY-SHT42. The mount allows these boards to be attached to the side of the LGX Lite assembly.
Included Parts
The Bill of Materials (BOM) for assembly includes:
- 4x M3 Square Nuts (provided with the LGX Lite)
- 4x M3 Nuts
- 2x M3x6 BHCS (to mount through the LGX Lite holes)
- 4x M3x6 SHCS (or suitable hardware for your specific board) to secure the board
Assembly Guidance
To assemble, place the two M3 square nuts that come with the LGX Lite into the side recesses of the mount. Use the M3x6 BHCS to secure the mount to the LGX Lite holes, and use the M3x6 SHCS to mount the CAN board to the side mount.
Texto original del autor en Printables
<h3><strong>LGX Lite CAN Side Mount (Huvud/SHT42)</strong></h3><p>Side mount for CAN toolhead boards with NEMA 17 sizes such as <a href="https://github.com/bondus/KlipperToolboard">Huvud</a>, <a href="https://github.com/bigtreetech/EBB">EBB36 </a>and <a href="https://mellow.klipper.cn/#/board/fly_sht36_42/">FLY-SHT42</a>.</p><p>You will need two M3 square nuts that should have come with the LGX Lite. to put into the side holes for mounting.</p><p> </p><h3><strong>LGX Lite Can seitliche Befestigung</strong></h3><p>Mount zu seitlichen Befestigung eines Can Moduls in der Baufröße NEMA 17 wie <a href="https://github.com/bondus/KlipperToolboard">Huvud</a>, <a href="https://github.com/bigtreetech/EBB">EBB36</a> und <a href="https://mellow.klipper.cn/#/board/fly_sht36_42/">FLY-SHT42</a> . </p><p>Es werden zwei M3 Vierkantmuttern die mit dem LGX Lite kommen, sie kommen in die Seitlichen Aussparungen zur Befestigung.</p><p> </p><p><strong>BOM</strong></p><ul><li>4x M3 Square Nuts (Included with LGX Lite)</li><li>4x M3 Nuts</li><li>2x M3x6 BHCS to mount through to LGX Lite holes</li><li>4x M3x6 SHCS for board mounting (or whatever is suitable for your board)</li></ul>
Preguntas y aportaciones