Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

2 modelos etiquetados

#extruder

Descubre modelos 3D etiquetados como extruder y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de CR-6 Max Cable Swing Arm

CR-6 Max Cable Swing Arm

A design for cable management on a direct drive CR-6 Max. The mount attaches to the location of the factory extruder motor. The author notes that the holes will need to be drilled out for a preferred fastener size, and only the two back holes are required to prevent interference with the swing motion of the arm. The assembly uses a standard skateboard bearing pressed into the swing arm to push on the stud. The author instructs to bolt the mount plate onto the machine first. The author reports printing in PLA using a 0.6mm nozzle and 3 walls, noting that other filament and settings should work.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de BMG Aero Direct Extruder Mount For CR-10

BMG Aero Direct Extruder Mount For CR-10

This is an extruder mount and layer fan mount for the Mellow Store using the CR-10/Ender 3 style carriage with the E3D volcano extruder. The author notes they cannot model in CAD, so all designs are polygon meshes. The author provides links to the extruder model, the PCB, and where to buy the extruder. Files included: Extruder_Mount.stl, Extruder_Mount_Right_Offset.stl, BLTouch_Mount.stl, Layer_Fan_BLTouch_Rail.stl.

Technology
Sin probar
material
—
Difficulty
Sin especificar