Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

3 modelos etiquetados · Página 1 de 1

#ender 3 v2

Descubre modelos 3D etiquetados como ender 3 v2 y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Satsana Duct (Ender 3/ 3 V2) - Microswiss Direct Drive (Ender 3 CR-Touch Mount)

Satsana Duct (Ender 3/ 3 V2) - Microswiss Direct Drive (Ender 3 CR-Touch Mount)

Satsana Duct (Ender 3/ 3 V2) - Microswiss Direct Drive (Ender 3 CR-Touch Mount) Purpose This model is a Satsana fan duct designed specifically for Ender 3 and Ender 3 v2 printers equipped with a MicroSwiss direct drive installation. It is a modification of an existing design, featuring an adjusted screw region with a wider gap to allow for easier reach during installation. Practical Uses This duct enables the use of a CR-Touch sensor without requiring an additional printed part. To implement this, the user must utilize the standard Ender 3 CR-Touch mount bracket and secure it by screwing through the fan duct. Included Parts - Satsana Microswiss Duct.stl Printing and Assembly Guidance The author specifies printing this model using PETG filament at a layer height of 0.20mm. Assembly requires the Ender 3 CR-Touch mount bracket and screws to be passed through the duct to secure the sensor.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de mini Satsana Remix - Ender 3 V2 + BL/CR touch support

mini Satsana Remix - Ender 3 V2 + BL/CR touch support

This model is a remix of the mini Satsana by Kenopy, specifically designed for the Ender 3 V2. Its primary purpose is to serve as a fan shroud that maintains compatibility with the original metal BL/CR Touch mounting bracket. In practical use, this shroud allows users to upgrade their cooling setup without needing to purchase additional hardware. The design is intended to reuse all existing components from the original fan shroud. The included files are: - Satsana_Clamp.stl - mini_Satsana_E3V2_Original_blcr_touch.stl For printing guidance, the author instructs to print the model as shown in picture 3 of the original listing. When configuring print settings, users should activate supports with the "touching buildplate" setting.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar