Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

5 modelos etiquetados · Página 1 de 1

#ender

Descubre modelos 3D etiquetados como ender y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Ender 3/Pro/5/Cr-10 Knob for Extruder

Ender 3/Pro/5/Cr-10 Knob for Extruder

Ender 3/Pro/5/Cr-10 Knob for Extruder Purpose This model is a replacement or upgrade knob designed specifically for use on a 3D printer extruder. Practical Uses According to the author, this part is intended to be printed and placed onto the existing extruder knob. It is reported to be compatible with the Ender 3, Ender 3 Pro, Ender 5, and CR-10 models. The author notes that it might also work with most other Ender series printers. Included Parts - Ender_3_Extruder_Knob1.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Creality Heatbreak for Ender and CR-10 Series Printers

Creality Heatbreak for Ender and CR-10 Series Printers

This model represents the Creality heatbreak used in the Ender and CR-10 series printers, specifically including the CR-10 V2 and V3 models. Purpose The author intends for this model to serve as a design aid for users creating modifications for Creality printers. Practical Uses While the author notes the model could be printed, its primary intended use is as a reference for designing custom parts or modifications compatible with the Ender and CR-10 series hardware. Included Parts The download includes the following files: - Creality CR-10 V2_V3 Heatbreak (.step) - Creality CR-10 V2_V3 Heatbreak (.stl)

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Satsana Duct (Ender 3/ 3 V2) - Microswiss Direct Drive (Ender 3 CR-Touch Mount)

Satsana Duct (Ender 3/ 3 V2) - Microswiss Direct Drive (Ender 3 CR-Touch Mount)

Satsana Duct (Ender 3/ 3 V2) - Microswiss Direct Drive (Ender 3 CR-Touch Mount) Purpose This model is a Satsana fan duct designed specifically for Ender 3 and Ender 3 v2 printers equipped with a MicroSwiss direct drive installation. It is a modification of an existing design, featuring an adjusted screw region with a wider gap to allow for easier reach during installation. Practical Uses This duct enables the use of a CR-Touch sensor without requiring an additional printed part. To implement this, the user must utilize the standard Ender 3 CR-Touch mount bracket and secure it by screwing through the fan duct. Included Parts - Satsana Microswiss Duct.stl Printing and Assembly Guidance The author specifies printing this model using PETG filament at a layer height of 0.20mm. Assembly requires the Ender 3 CR-Touch mount bracket and screws to be passed through the duct to secure the sensor.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar