4 modelos etiquetados · Página 1 de 1

#ender 3 pro

Descubre modelos 3D etiquetados como ender 3 pro y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

HerramientasGratis

Ender 3/Pro/5/Cr-10 Knob for Extruder

Ender 3/Pro/5/Cr-10 Knob for Extruder Purpose This model is a replacement or upgrade knob designed specifically for use on a 3D printer extruder. Practical Uses According to the author, this part is intended to be printed and placed onto the existing extruder knob. It is reported to be compatible with the Ender 3, Ender 3 Pro, Ender 5, and CR-10 models. The author notes that it might also work with most other Ender series printers. Included Parts - Ender_3_Extruder_Knob1.stl

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

HerramientasGratis

Satsana Ender 3 Fan Duct for CR-Touch

Satsana Ender 3 Fan Duct for CR-Touch Purpose This model is a modified remix of the Satsana Fan Shroud/Duct by eric-anastas. It is specifically designed for the Ender 3 Pro to accommodate the Creality CR-Touch touch sensor using its standard hardware. Practical Uses This shroud serves as a 3D printer accessory to integrate a CR-Touch sensor with the fan duct system on an Ender 3 Pro. Included Parts - Satsana_CR-Touch_Remix.stl - cable cap.stl Printing and Assembly Guidance To print, the author suggests using a block object to prevent support generation on overlaps, ensuring only the bottom connecting sections are supported. While the author used a .16mm layer height, they noted that .2mm may also work. Reported print settings from the author: - Printer: Creality Ender 3 Pro - Rafts: No - Supports: Yes - Resolution: 200 - Infill: 38 - Filament: Overture PLA Post-printing, use an X-Acto blade or razor to remove supports from the connecting sections. This step is necessary to provide enough room for the CR-Touch bracket to install properly.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

HerramientasGratis

CR Touch with Dual Fan

This model is designed as an alternative mounting solution for users who find that standard setups do not fit a CR Touch. The author notes that this specific configuration required an extension plate for use on an Ender 3 Pro. Practical uses include mounting a CR Touch or BL Touch on an Ender 3 Pro printer when standard dimensions are incompatible. Included parts: - CR Touch Extension.stl - Backplate with CR-Touch.stl

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

HerramientasGratis

Remixed Parts of Chodec's Direct Drive for CR Touch

Remixed Parts of Chodec's Direct Drive for CR Touch Purpose This model provides remixed components designed to adapt Chodec's direct drive setup for use with a CR Touch instead of a BL Touch. The modifications specifically adjust the Ender 3 Pro main body and the fan duct to accommodate the sensor and include a notch for the wiring harness. Practical Uses These parts are intended for users looking to modify an Ender 3 Pro direct drive assembly to be compatible with CR Touch hardware. Included Parts - Fan Duct CR Touch.stl - E3P Main Body.stl Note: The author states these parts are "Not perfect."

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar