Satsana Ender 3 Fan Duct for CR-Touch
Satsana Ender 3 Fan Duct for CR-Touch Purpose This model is a modified remix of the Satsana Fan Shroud/Duct by eric-anastas. It is specifically designed for the Ender 3 Pro to accommodate the Creality CR-Touch touch sensor using its standard hardware. Practical Uses This shroud serves as a 3D printer accessory to integrate a CR-Touch sensor with the fan duct system on an Ender 3 Pro. Included Parts - Satsana_CR-Touch_Remix.stl - cable cap.stl Printing and Assembly Guidance To print, the author suggests using a block object to prevent support generation on overlaps, ensuring only the bottom connecting sections are supported. While the author used a .16mm layer height, they noted that .2mm may also work. Reported print settings from the author: - Printer: Creality Ender 3 Pro - Rafts: No - Supports: Yes - Resolution: 200 - Infill: 38 - Filament: Overture PLA Post-printing, use an X-Acto blade or razor to remove supports from the connecting sections. This step is necessary to provide enough room for the CR-Touch bracket to install properly.
- Tecnología
- Sin probar
- Material
- —
- Dificultad
- Sin especificar