45 modelos etiquetados

#assembly kit

Descubre modelos 3D etiquetados como assembly kit y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

Vehículos y transporteGratis

Patrol Boat 31 Mk II — STL Assembly Kit

Patrol Boat 31 Mk II supplied as a multipart naval model for scale-model assembly and display. The complete package contains 33 unique STL meshes, preserving the supplied geometry and original numerical coordinates. The assembled cover is a presentation reference; the downloadable components need inspection and assembly. PACKAGE CONTENTS A ZIP archive with all unique STL components, new English filenames and an English file guide linking each renamed part to its source assembly label. Example component labels: p_1_Pibber_center_hull, p_10_Pibber_mast, p_11_Pibber_radar_dome, p_12_Pibber_radar_mast, p_13_Pibber_lifebouy, p_14_Pibber_engine_L, p_15_Pibber_engine_R, p_16_Pibber_cover_left, p_17_Pibber_cover_r, p_18_Pibber_m60, p_19_Pibber_mk18mount, p_2_Pibber_stern. Repeated byte-identical meshes are omitted. Any included assembly PDF is retained with a new English filename. Different source variants may be alternative parts and need not all be assembled together. VIEWER AND PREPARATION The separate STL for the viewer corresponds to source component 260-1-p_1_Pibber_center_hull (repaired).stl. The full multipart set is inside the ZIP; the preview alone does not represent every included part. Check units, dimensions, fit, thin walls, supports and component orientation in your modelling software or slicer. No tested print profile or independently validated physical assembly is claimed. Hardware, electronics and motorization are not supplied. A model labelled RC still requires separate hardware and verification before operation. PRESENTATION AND LICENSE The image is a visualization rather than a photograph of a tested physical print. Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Chicken Tank — Two-Legged Sci-Fi Walker — STL Assembly Kit

Chicken Tank — Two-Legged Sci-Fi Walker supplied as a multipart tank model for scale-model assembly and display. The complete package contains 38 unique STL meshes, preserving the supplied geometry and original numerical coordinates. The assembled cover is a presentation reference; the downloadable components need inspection and assembly. PACKAGE CONTENTS A ZIP archive with all unique STL components, new English filenames and an English file guide linking each renamed part to its source assembly label. Example component labels: cannon, chicken-tank, fdm-body-1, fdm-left-leg-mount, fdm-left-lower-leg-left-half, fdm-left-lower-leg-right-half, fdm-left-tail-left-half, fdm-left-tail-right-half, fdm-mantlet-left-half, fdm-mantlet-right-half, fdm-right-leg-mount, fdm-right-lower-leg-left-half. Repeated byte-identical meshes are omitted. Any included assembly PDF is retained with a new English filename. Different source variants may be alternative parts and need not all be assembled together. VIEWER AND PREPARATION The separate STL for the viewer corresponds to source component chicken-tank.stl. The full multipart set is inside the ZIP; the preview alone does not represent every included part. Check units, dimensions, fit, thin walls, supports and component orientation in your modelling software or slicer. No tested print profile or independently validated physical assembly is claimed. Hardware, electronics and motorization are not supplied. A model labelled RC still requires separate hardware and verification before operation. PRESENTATION AND LICENSE The image is a visualization rather than a photograph of a tested physical print. Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Conqueror Heavy Tank — Multipart STL Assembly Kit

Conqueror heavy tank supplied as a multipart tank model for scale-model assembly and display. The complete package contains 78 unique STL meshes, preserving the supplied geometry and original numerical coordinates. The model depicts a tracked hull, sloped front armour, rounded turret, long cannon, roof machine gun and aerials. The assembled cover is a presentation reference; the downloadable components need inspection and assembly. PACKAGE CONTENTS A ZIP archive with all unique STL components, new English filenames and an English file guide linking each renamed part to its source assembly label. Example component labels: A1, C25, T5, C1, C2, C3, C4, C5, C6, C7, C8, C9. Repeated byte-identical meshes are omitted. Any included assembly PDF is retained with a new English filename. Different source variants may be alternative parts and need not all be assembled together. VIEWER AND PREPARATION The separate STL for the viewer corresponds to source component 99-72-H4 (repaired).stl. The full multipart set is inside the ZIP; the preview alone does not represent every included part. Check units, dimensions, fit, thin walls, supports and component orientation in your modelling software or slicer. No tested print profile or independently validated physical assembly is claimed. Hardware, electronics and motorization are not supplied. A model labelled RC still requires separate hardware and verification before operation. PRESENTATION AND LICENSE The image is a visualization rather than a photograph of a tested physical print. Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Volkswagen Beetle Cabriolet — Multipart STL Assembly Kit

An open-top Beetle cabriolet with a rounded body, round headlights, separate bumpers, cabin, wheels and folded soft-top form. Supplied as a multipart STL scale-model kit. The downloadable package contains 14 unique meshes, with their original geometry and numerical coordinates preserved. PACKAGE CONTENTS All supplied unique STL parts are included in the ZIP, renamed in English. An English file guide maps each renamed file to its source assembly label. Repeated byte-identical copies are omitted. Alternative source variants may be optional parts rather than components used together. PREVIEW AND ASSEMBLY The separately downloadable STL is one component of the kit, selected for the web viewer; it does not represent the entire assembled vehicle. Extract the ZIP to access all parts. Check units, dimensions, alignment, component fit, thin walls and supports in your modelling software or slicer before printing. No tested print profile or functional RC mechanism is claimed. Hardware and electronics are not included. ORIGINAL PRESENTATION MESHOPIA created the hyperrealistic assembled-model visualization locally in ComfyUI using the supplied assembled reference. It illustrates the kit and is not a photograph of a tested physical print. LICENSE Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Ferrari 250 GTO — Multipart STL Assembly Kit

A classic coupe with a long sculpted hood, three front openings, round headlight forms, side vents, cabin and fine wheel detail. Supplied as a multipart STL scale-model kit. The downloadable package contains 12 unique meshes, with their original geometry and numerical coordinates preserved. PACKAGE CONTENTS All supplied unique STL parts are included in the ZIP, renamed in English. An English file guide maps each renamed file to its source assembly label. Repeated byte-identical copies are omitted. Alternative source variants may be optional parts rather than components used together. PREVIEW AND ASSEMBLY The separately downloadable STL is one component of the kit, selected for the web viewer; it does not represent the entire assembled vehicle. Extract the ZIP to access all parts. Check units, dimensions, alignment, component fit, thin walls and supports in your modelling software or slicer before printing. No tested print profile or functional RC mechanism is claimed. Hardware and electronics are not included. ORIGINAL PRESENTATION MESHOPIA created the hyperrealistic assembled-model visualization locally in ComfyUI using the supplied assembled reference. It illustrates the kit and is not a photograph of a tested physical print. LICENSE Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Ford Mustang GT500 — Multipart STL Assembly Kit

A sports coupe with a wide grille, round headlamp forms, hood scoop, sloping roof, detailed wheels and sculpted bumpers. Supplied as a multipart STL scale-model kit. The downloadable package contains 12 unique meshes, with their original geometry and numerical coordinates preserved. PACKAGE CONTENTS All supplied unique STL parts are included in the ZIP, renamed in English. An English file guide maps each renamed file to its source assembly label. Repeated byte-identical copies are omitted. Alternative source variants may be optional parts rather than components used together. PREVIEW AND ASSEMBLY The separately downloadable STL is one component of the kit, selected for the web viewer; it does not represent the entire assembled vehicle. Extract the ZIP to access all parts. Check units, dimensions, alignment, component fit, thin walls and supports in your modelling software or slicer before printing. No tested print profile or functional RC mechanism is claimed. Hardware and electronics are not included. ORIGINAL PRESENTATION MESHOPIA created the hyperrealistic assembled-model visualization locally in ComfyUI using the supplied assembled reference. It illustrates the kit and is not a photograph of a tested physical print. LICENSE Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Mercedes-Benz 300 SL — Multipart STL Assembly Kit

A classic 300 SL with gullwing doors, an open cabin, round headlights, side vents, detailed bumpers and separate wheel forms. Supplied as a multipart STL scale-model kit. The downloadable package contains 13 unique meshes, with their original geometry and numerical coordinates preserved. PACKAGE CONTENTS All supplied unique STL parts are included in the ZIP, renamed in English. An English file guide maps each renamed file to its source assembly label. Repeated byte-identical copies are omitted. Alternative source variants may be optional parts rather than components used together. PREVIEW AND ASSEMBLY The separately downloadable STL is one component of the kit, selected for the web viewer; it does not represent the entire assembled vehicle. Extract the ZIP to access all parts. Check units, dimensions, alignment, component fit, thin walls and supports in your modelling software or slicer before printing. No tested print profile or functional RC mechanism is claimed. Hardware and electronics are not included. ORIGINAL PRESENTATION MESHOPIA created the hyperrealistic assembled-model visualization locally in ComfyUI using the supplied assembled reference. It illustrates the kit and is not a photograph of a tested physical print. LICENSE Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

DeLorean DMC-12 — Foldable STL Assembly Kit

A DeLorean DMC-12 coupe form with a wedge-shaped nose, gullwing-door sections, a rear engine-cover panel and detailed wheel-shaped sections. Supplied as a foldable scale-model project. The package contains 2 unique STL files with original geometry and numerical coordinates preserved. PACKAGE CONTENTS All supplied unique STL files are included in the ZIP with new English filenames. An English file guide maps each file to its source label. The separate STL provides a viewer preview. Source parts may be laid out flat or partially unfolded for printing; the cover shows the assembled presentation. Different variants may be optional alternatives. FOLDING AND PRINT PREPARATION Inspect the folding seams, clearances and component connections before printing or assembly. Check units, dimensions, support requirements, first-layer adhesion and material flexibility in your slicer. No independently tested folding cycle, print profile or functioning RC mechanism is claimed. Hardware and electronics are not included. ORIGINAL PRESENTATION MESHOPIA generated the assembled-model studio visualization locally in ComfyUI using the supplied mounted-model reference. It has a new copper-bronze finish, dark slate tabletop, photographic lighting and blue-gray background. The image is an illustrative visualization, not a photograph of a verified physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Volkswagen T1 Camper Van — Multipart STL Assembly Kit

A Volkswagen T1 miniature with a rounded split-windshield nose, an open roof cutout, four rectangular side-window openings between the rear pillar and angled front cabin window, two-tone body and separate wheels. Supplied as a multipart STL scale-model kit. The downloadable package contains 6 unique meshes, with their original geometry and numerical coordinates preserved. PACKAGE CONTENTS All supplied unique STL parts are included in the ZIP, renamed in English. An English file guide maps each renamed file to its source assembly label. Repeated byte-identical copies are omitted. Alternative source variants may be optional parts rather than components used together. PREVIEW AND ASSEMBLY The separately downloadable STL is one component of the kit, selected for the web viewer; it does not represent the entire assembled vehicle. Extract the ZIP to access all parts. Check units, dimensions, alignment, component fit, thin walls and supports in your modelling software or slicer before printing. No tested print profile or functional RC mechanism is claimed. Hardware and electronics are not included. ORIGINAL PRESENTATION MESHOPIA created the hyperrealistic assembled-model visualization locally in ComfyUI using the supplied assembled reference. It illustrates the kit and is not a photograph of a tested physical print. LICENSE Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Ford GT40 Mk II 1966 — Multipart STL Assembly Kit

A 1966 Ford GT40 Mk II miniature with a low mid-engine racing silhouette, sweeping front fenders, a deep nose opening, sculpted side air intakes, enclosed cabin form, raised rear spoiler and separate front and rear wheel-and-axle components. COMPLETE STL KIT The ZIP includes five unique original STL meshes: the body, standard front wheel, standard rear wheel, and alternative front and rear wheels labelled for greater tolerance. Each wheel mesh can be repeated for the two sides. All filenames are in English, and the included file guide maps renamed files to their original assembly labels. Byte-identical duplicate copies are omitted. Original geometry and numerical coordinates in the downloadable STL files are preserved. PREVIEW AND ASSEMBLY The separately downloadable STL is the body component for the web viewer. Extract the ZIP for the wheels and tolerance alternatives. The source parts are not a pre-assembled single mesh. Check dimensions, scale, clearances, axle alignment, supports and thin sections before printing. No physical assembly, print profile or mechanical performance has been verified. Hardware and electronics are not included. ORIGINAL MESHOPIA COVER The actual supplied body and wheel meshes were assembled visually and rendered locally in Blender. Four wheel instances were posed to illustrate the finished miniature; their placement is a cover visualization, not a tested fit specification. MESHOPIA created the new metallic-teal finish, camera, studio lighting and warm stone background. LICENSE Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Fiat 147 — Multipart STL Assembly Kit

A Fiat 147 three-door hatchback scale model with a compact body, open window apertures, a detailed interior, separate bumpers, dashboard, steering wheel, tyres and wheel rims. Supplied as a multipart STL scale-model kit. The downloadable package contains 8 unique meshes, with their original geometry and numerical coordinates preserved. PACKAGE CONTENTS All supplied unique STL parts are included in the ZIP, renamed in English. An English file guide maps each renamed file to its source assembly label. Repeated byte-identical copies are omitted. Alternative source variants may be optional parts rather than components used together. PREVIEW AND ASSEMBLY The separately downloadable STL is one component of the kit, selected for the web viewer; it does not represent the entire assembled vehicle. Extract the ZIP to access all parts. Check units, dimensions, alignment, component fit, thin walls and supports in your modelling software or slicer before printing. No tested print profile or functional RC mechanism is claimed. Hardware and electronics are not included. ORIGINAL PRESENTATION MESHOPIA assembled the actual supplied STL parts visually in Blender and created this original studio render. The poses illustrate the kit; physical part fit has not been tested. Original downloadable geometry and coordinates remain unchanged. It illustrates the kit and is not a photograph of a tested physical print. LICENSE Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Volkswagen Passat Four-Door — Multipart STL Assembly Kit

A classic Volkswagen Passat four-door sedan scale model with a compact body, open window apertures, a detailed interior, separate hood, dashboard, steering wheel and alternative wheel meshes. Supplied as a multipart STL scale-model kit. The downloadable package contains 7 unique meshes, with their original geometry and numerical coordinates preserved. PACKAGE CONTENTS All supplied unique STL parts are included in the ZIP, renamed in English. An English file guide maps each renamed file to its source assembly label. Repeated byte-identical copies are omitted. Alternative source variants may be optional parts rather than components used together. PREVIEW AND ASSEMBLY The separately downloadable STL is one component of the kit, selected for the web viewer; it does not represent the entire assembled vehicle. Extract the ZIP to access all parts. Check units, dimensions, alignment, component fit, thin walls and supports in your modelling software or slicer before printing. No tested print profile or functional RC mechanism is claimed. Hardware and electronics are not included. ORIGINAL PRESENTATION MESHOPIA assembled the actual supplied STL parts visually in Blender and created this original studio render. The poses illustrate the kit; physical part fit has not been tested. Original downloadable geometry and coordinates remain unchanged. It illustrates the kit and is not a photograph of a tested physical print. LICENSE Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Slot Car Caravan — Body and Tow Frame STL Kit

Two caravan meshes: a rounded exterior body with wheel openings and a rectangular frame with triangular towbar. Separate wheels, towing vehicle and hardware are not supplied. PACKAGE CONTENTS The complete ZIP includes 2 unique STL components, with new English filenames and an English file guide identifying every original source component. Original geometry and coordinates are preserved. The separately downloadable STL is one component for the web viewer; extract the ZIP to obtain the full supplied set. PRESENTATION The cover is our own Blender studio render of every supplied component, combined in their original relative coordinates to show the body with its tow frame, with new finish, camera, lighting and background. PREPARATION AND USE Inspect units, dimensions, mesh integrity, thin walls, clearance, mating surfaces and support requirements before printing. Scale and compatibility follow source labels and have not been independently verified. Physical assembly and functional performance have not been tested. Other model parts, hardware, paint and equipment are not included. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

RENFE Series 592 Cercanias Railcar — STL Model Package

A Spanish RENFE Series 592 diesel railcar model with the distinctive raised roof equipment, cab front, passenger-window arrangement and supplied underframe components. PACKAGE CONTENTS The ZIP includes 12 unique STL files, all renamed in English, together with an English guide mapping the new filenames to the original component labels. Original mesh geometry and numerical coordinates are preserved. Alternate source parts and printing variants are optional choices. The separate STL provides a preview of one supplied component; extract the ZIP for the full model package. ASSEMBLY AND PRINT PREPARATION Identify locomotive body, cab, roof, running gear and detail parts through the file guide. Check units, dimensions, repeated-part quantities, thin walls, support needs, moving clearances and mesh integrity before printing. MESHOPIA has not physically printed or assembled the model and does not claim tested articulation, running performance or compatibility with a specific track gauge. Physical hardware, motors, electronics and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new painted finish, studio lighting and background. Any presentation rail or studio scenery is illustrative and is not included unless present in the source meshes. The image is not evidence of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Leviathan Steam Locomotive — STL Model Package

A detailed historic-style steam locomotive with a flared smokestack, cylindrical boiler, exposed brass-style fittings, large driving wheels, connecting rods, cab and front cowcatcher. PACKAGE CONTENTS The ZIP includes 65 unique STL files, all renamed in English, together with an English guide mapping the new filenames to the original component labels. Original mesh geometry and numerical coordinates are preserved. Alternate source parts and printing variants are optional choices. The separate STL provides a preview of one supplied component; extract the ZIP for the full model package. ASSEMBLY AND PRINT PREPARATION Identify locomotive body, cab, roof, running gear and detail parts through the file guide. Check units, dimensions, repeated-part quantities, thin walls, support needs, moving clearances and mesh integrity before printing. MESHOPIA has not physically printed or assembled the model and does not claim tested articulation, running performance or compatibility with a specific track gauge. Physical hardware, motors, electronics and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new painted finish, studio lighting and background. Any presentation rail or studio scenery is illustrative and is not included unless present in the source meshes. The image is not evidence of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Back to the Future III Jules Verne Flying Train — STL Model Package

The Jules Verne time train from Back to the Future III, with its twin stacks, exposed steam machinery, wing-like panels, tall enclosed cab and streamlined lower equipment. PACKAGE CONTENTS The ZIP includes 45 unique STL files and 1 additional source model file, all renamed in English, together with an English guide mapping the new filenames to the original component labels. Original mesh geometry and numerical coordinates are preserved. Alternate source parts and printing variants are optional choices. The separate STL provides a preview of one supplied component; extract the ZIP for the full model package. ASSEMBLY AND PRINT PREPARATION Identify locomotive body, cab, roof, running gear and detail parts through the file guide. Check units, dimensions, repeated-part quantities, thin walls, support needs, moving clearances and mesh integrity before printing. MESHOPIA has not physically printed or assembled the model and does not claim tested articulation, running performance or compatibility with a specific track gauge. Physical hardware, motors, electronics and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new painted finish, studio lighting and background. Any presentation rail or studio scenery is illustrative and is not included unless present in the source meshes. The image is not evidence of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Back to the Future Time Train and Tender — STL Model Package

A steampunk time-travel locomotive and tender inspired by Back to the Future, with twin tall stacks, large boiler, exposed piping and distinctive front cowcatcher. PACKAGE CONTENTS The ZIP includes 2 unique STL files, all renamed in English, together with an English guide mapping the new filenames to the original component labels. Original mesh geometry and numerical coordinates are preserved. Alternate source parts and printing variants are optional choices. The separate STL provides a preview of one supplied component; extract the ZIP for the full model package. ASSEMBLY AND PRINT PREPARATION Identify locomotive body, cab, roof, running gear and detail parts through the file guide. Check units, dimensions, repeated-part quantities, thin walls, support needs, moving clearances and mesh integrity before printing. MESHOPIA has not physically printed or assembled the model and does not claim tested articulation, running performance or compatibility with a specific track gauge. Physical hardware, motors, electronics and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new painted finish, studio lighting and background. Any presentation rail or studio scenery is illustrative and is not included unless present in the source meshes. The image is not evidence of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Aliens M577 Armored Personnel Carrier — Multipart STL Kit

The futuristic M577 armored personnel carrier from Aliens, with its low boxy hull, sloped glazed cab area, front twin weapon housing and roof equipment. PACKAGE CONTENTS The complete ZIP contains 71 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

DeLorean Back to the Future Kits 1, 2 and 3 — Multipart STL Kit

A multipart DeLorean time-machine collection containing the supplied Kit 1, Kit 2 and Kit 3 components, display elements and alternate configurations. PACKAGE CONTENTS The complete ZIP contains 248 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

RC Semi-Truck and Recovery Equipment Assembly Kit — Multipart STL Kit

A large multipart semi-truck model collection with cab, chassis, running gear and supplied recovery or working-equipment components. Functional labels describe the source design; physical operation has not been tested. PACKAGE CONTENTS The complete ZIP contains 311 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Mad Max War Rig Tanker Trailer — Multipart STL Kit

The War Rig tanker trailer from Mad Max, with its cylindrical tank, external bands and rails, armored details and supplied multi-axle running gear. The truck tractor is a separate model. PACKAGE CONTENTS The complete ZIP contains 100 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

H140 Vintage Pickup Truck Body Kit — Multipart STL Kit

An H140 vintage pickup body kit with a rounded cab, circular headlight openings, sculpted front fenders and open cargo bed. The reference depicts the body without wheels. PACKAGE CONTENTS The complete ZIP contains 6 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

PNW60 Vintage Panel Truck Body Kit — Multipart STL Kit

A PNW60 vintage panel-truck body kit with an enclosed cargo body, broad roof, rectangular front grille and rounded wheel arches. The supplied reference depicts the body without wheels. PACKAGE CONTENTS The complete ZIP contains 6 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

T-62 Main Battle Tank — Multipart STL Kit

A multipart T-62 tank with its low rounded turret, long main gun, five large road wheels per side, tracked hull and supplied surface-detail components. PACKAGE CONTENTS The complete ZIP contains 54 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Chevrolet Corvette C1 Convertible — Multipart STL Kit

Classic Corvette C1 open-top sports car with curved fenders, contrasting side coves, round headlights and supplied interior and running-gear components. PACKAGE CONTENTS The complete ZIP contains 14 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

German WWII Half-Track Troop Carrier with Soldiers — Multipart STL Kit

A German WWII-style half-track troop carrier with front steering wheels, tracked rear running gear, open passenger compartment, soldier figures and supplied stowage components. Exact vehicle type is not independently established. PACKAGE CONTENTS The complete ZIP contains 19 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

DeLorean DMC-12 Back to the Future Time Machine — Multipart STL Kit

A DeLorean-based time-machine assembly collection with gullwing body details and supplied alternate components. PACKAGE CONTENTS The complete ZIP contains 126 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Mad Max War Rig Truck Tractor — Multipart STL Kit

The armored War Rig truck tractor from Mad Max, with its heavy front plow, exposed equipment, tall exhaust stacks and multi-axle rear running gear. The tanker trailer is a separate model. PACKAGE CONTENTS The complete ZIP contains 142 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Tiger I Tank — STL Assembly Kit

Tiger I Tank supplied as a multipart tank model for scale-model assembly and display. The complete package contains 249 unique STL meshes, preserving the supplied geometry and original numerical coordinates. The assembled cover is a presentation reference; the downloadable components need inspection and assembly. PACKAGE CONTENTS A ZIP archive with all unique STL components, new English filenames and an English file guide linking each renamed part to its source assembly label. Example component labels: B1-B16 High explosive shells(TIGER have 92s, you can find where storage boxs _), E09 Generator fan, H181 Vice tank on board right, H182 Engine compartment bulkhead left, H183 Vice tank on board left, H184 Middle bulkhead right, H185 Right storage box partition, H186 Right rear storage box, H187 Right front storage box, H188 Right rear storage box cover, H189 Right front storage box cover, H190 Middle bulkhead left. Repeated byte-identical meshes are omitted. Any included assembly PDF is retained with a new English filename. Different source variants may be alternative parts and need not all be assembled together. VIEWER AND PREPARATION The separate STL for the viewer corresponds to source component 367-69-H145 tr l f.stl. The full multipart set is inside the ZIP; the preview alone does not represent every included part. Check units, dimensions, fit, thin walls, supports and component orientation in your modelling software or slicer. No tested print profile or independently validated physical assembly is claimed. Hardware, electronics and motorization are not supplied. A model labelled RC still requires separate hardware and verification before operation. PRESENTATION AND LICENSE The image is a visualization rather than a photograph of a tested physical print. Published by MESHOPIA under CC0 based on the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

F75 Vintage Pickup Truck — 1:18 Scale — Multipart STL Kit

A vintage-style F75 pickup with a rounded cab, circular headlights, short open cargo bed and supplied multipart body and running-gear components. The source labels the scale 1:18; dimensions are unverified. PACKAGE CONTENTS The complete ZIP contains 17 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Kettenkrad Sd.Kfz. 2 with Trailer — 1:43 Scale — Multipart STL Kit

A Kettenkrad Sd.Kfz. 2 tracked motorcycle with front steering wheel, compact open body, rear track units and a separate two-wheel cargo trailer. The supplied source labels the scale 1:43; physical dimensions are unverified. PACKAGE CONTENTS The complete ZIP contains 11 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Dunlop Control Tower and Elevated Walkway — 1:32 Slot-Car Scenery — Multipart STL Kit

A multipart slot-car scenery structure with a tall glazed control tower, enclosed elevated pedestrian walkway and smaller support tower. The source labels the scale 1:32. Track, vehicles and surrounding layout shown in source photos are not part of the structure kit. PACKAGE CONTENTS The complete ZIP contains 32 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify the structural frames, wall panels, roof sections, floors and architectural details through the English file guide. Repeat modular components as needed for the selected building layout. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. Check the selected layout and component fit before installation. Vehicles, track, lighting, fixings and paint are not included. The cover shows only the supplied building scenery. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Slot-Car Pit-Lane Garage — Modular STL Scenery Kit

A multipart pit-lane garage scenery kit with modular rectangular bays, wall panels, roof panels and supplied detail components. The reference shows an assembled five-bay presentation; bay quantities can be adapted by repeating suitable source components. Vehicles and track in source photos are not included. PACKAGE CONTENTS The complete ZIP contains 15 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify the structural frames, wall panels, roof sections, floors and architectural details through the English file guide. Repeat modular components as needed for the selected building layout. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. Check the selected layout and component fit before installation. Vehicles, track, lighting, fixings and paint are not included. The cover shows only the supplied building scenery. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Vehicle Wheel Rim Collection — 170 STL Designs

A collection of 170 unique vehicle wheel-rim STL designs, including multi-spoke, five-spoke, deep-dish and other supplied styles. The original Blender studio cover shows eight representative source meshes arranged for display; all 170 unique designs are included in the download. Each rim remains a separate model and is not assembled with a tyre. PACKAGE CONTENTS The ZIP contains all 170 unique supplied STL meshes, with new English filenames and an English file guide linking each renamed design to the original source label. Byte-identical copies are omitted. Original downloadable geometry and coordinates are preserved. The separate viewer STL is one representative design. PRINT PREPARATION Check units, wheel diameter, width, axle and hub dimensions, clearance and mesh integrity before printing. The cover arranges eight source meshes at a consistent visual display size; it does not establish equal physical size or compatibility. No tested tyre, axle or chassis fit is claimed. Check support needs and orientation for each selected design. ORIGINAL MESHOPIA PRESENTATION MESHOPIA rendered eight actual supplied wheel meshes locally in Blender with a metallic finish and original studio lighting and background. The image is a render, not a photograph of a tested print. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Rancher 4x4 — Open-Body and Hardtop STL Vehicle Kit

A multipart Rancher 4x4 off-road vehicle with an open cabin, roll cage, upright windscreen, short-wheelbase body and supplied chassis and running-gear components. The complete source set is retained, including alternative components. PACKAGE CONTENTS The complete ZIP contains 139 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization. ADDITIONAL HARDTOP VERSION AND ACCESSORIES A supplemental ZIP contains 80 additional original STL designs, 27 source printer-specific G-code files and two reference PDFs with new English filenames and a detailed source-label guide. These add the source-labelled Model 2 Rancher 4x4 Hardtop v1.0 body and hardtop variants, 200 × 200 mm STL plate layouts, bumpers, winch components, fog lights, tow accessories and further source accessory variants to the open-body kit. Exact meshes already represented in published packages are omitted; original source bytes are preserved. The existing cover illustrates the open-body variant. The two source designs must be assembled as coherent versions; physical interchangeability has not been tested. Some meshes contain integrated printing supports. Source G-code is provided as reference for its original printer setup and must be inspected or regenerated for the actual printer before use. Purchased hardware and RC electronics are not included. The two included source PDFs retain their original text and credits under renamed English filenames. MESHOPIA CC0 publication uses the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Heresy Labs Sci-Fi Train Collection with Wagons — Multipart STL Kit

A multipart science-fiction train collection with an ornate armored locomotive, decorative skull motifs, chimneys, wheel assemblies, gun components, wagon bodies, tanker and flat-wagon components and straight and curved railway sections. Alternative component versions are retained. The cover depicts the locomotive; the package also contains the supplied wagons and accessories. PACKAGE CONTENTS The complete ZIP contains 96 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION Identify body, chassis, running gear, interior and detail components through the English file guide. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No tested driving, articulation, electronic system or mechanical fit is claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Jeep Playa Open Beach Vehicle — Multipart STL Kit

Jeep Playa open beach-vehicle model with an open cabin, roll cage, high-back bucket seats, road wheels, rear spare wheel and supplied trim and accessory components. PACKAGE CONTENTS The ZIP contains all 17 unique supplied STL components with new English filenames and an English file guide linking renamed files to the source component labels. Original downloadable geometry and coordinates are preserved. The separate STL viewer shows the main frame; download the ZIP for every part. ASSEMBLY AND PRINT PREPARATION The source parts are supplied in mixed assembly and print-layout coordinates and require assembly. Seats, frame and hood were inspected together in Blender, and the actual supplied five-spoke rim was rendered to check the presentation. Inspect dimensions, repeated-part quantities, component orientation, support needs and mechanical clearances before printing. No tested physical assembly, driving function or hardware fit is claimed. Motors, electronics, hardware and paint are not included. ORIGINAL MESHOPIA PRESENTATION MESHOPIA generated the hyperrealistic cover locally in ComfyUI from the assembled-model reference, with a new teal finish, camera angle, lighting and studio background. The high-back seat style and five-spoke rim were also checked against the supplied STL geometry. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

H1100 Vintage Pickup Truck Body Kit — Multipart STL Kit

An H1100 vintage pickup body kit with a broad cab roof, quad circular headlight surrounds, horizontal grille, sculpted hood and an open ribbed cargo bed. The body reference has no wheels or glass; the cover preserves the empty window openings. PACKAGE CONTENTS The complete ZIP contains 6 unique supplied model files, all renamed in English, and an English file guide linking the new filenames to the source component labels. Exact byte-identical duplicates are omitted; different source variants are retained. Original mesh geometry and numerical coordinates are preserved. Download and extract the ZIP to access every component. The separate STL is one large source component for the web viewer and does not represent the entire assembled model. ASSEMBLY AND PRINT PREPARATION The six supplied meshes cover the front clip, cabin, front and rear bed sections, hood and clear/transparent body accessories. Use the English file guide and included renamed assembly PDF to identify the sections. The cover shows the body-shell configuration; clear accessories can be finished separately. Alternate poses, mirrored sides, repaired meshes and print variants are optional source choices. Check units, dimensions, repeated-part quantities, thin walls, mesh integrity, support needs and clearances before printing. MESHOPIA has not physically printed or assembled the model. No chassis, wheels or tested mounting compatibility are supplied or claimed. Physical hardware, motors, electronics, tyres and paint are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original hyperrealistic visualization generated locally in ComfyUI from the supplied assembled-model reference, with a new finish, studio lighting and background. It is an illustrative assembly presentation and not proof of a tested physical print. LICENSE Published by MESHOPIA under CC0 with the uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Armidale-Class RC Patrol Boat — 1:35 Scale — Multipart STL Kit

Armidale-class patrol-boat model with a long pointed hull, low sloping superstructure, bridge, twin mast arrangement, deck railings and foredeck gun mount. The included assembly manual identifies a 1:35 scale kit. Physical dimensions and RC operation have not been independently tested. PACKAGE CONTENTS The complete ZIP contains 22 unique supplied STL meshes with new English filenames, an English source-label guide and the original 104-page assembly instruction manual under a new English filename. The file set includes multi-part print layouts; separate printed elements need identification and assembly. Original downloadable geometry and coordinates are preserved. The viewer STL is one source layout and does not depict the whole assembled ship. ASSEMBLY AND PRINT PREPARATION Use the included manual to identify the cradle, hull sections, superstructure, deck fittings, gun mount, bridge and mast elements. Inspect dimensions, print supports and fit. The original manual includes hull sealing, painting and electronics guidance; follow those sections when planning a physical RC build. Motors, electronics, propellers and hardware must be sourced separately. No tested watertightness, flotation, electrical system or operating performance is claimed. ORIGINAL MESHOPIA PRESENTATION The original hyperrealistic cover was generated locally in ComfyUI from the assembled-model photograph inside the supplied assembly manual, with a new dark teal finish, studio lighting, background and view. The complete ship and its display cradle are shown. This is an illustrative visualization rather than a photograph of a tested print. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

1:32 Slot-Car Billboard and Bench Support Kit — 5 STL Designs

Five source STL designs comprising a blank billboard panel, a billboard side support and three bench-frame designs. The cover assembles two copies of the actual side support with the actual blank panel. Bench, armrest and low-bench support designs are also included; no separate seat-plank meshes are supplied. PACKAGE CONTENTS The complete ZIP includes all five unique supplied STL files with new English filenames and an English source-label guide. Original mesh geometry and coordinates are preserved. The separate viewer STL is one source design, not the entire assembled scene. ASSEMBLY AND PRINT PREPARATION The cover uses translated, rotated and repeated copies of supplied meshes to illustrate an assembly. Inspect scale, dimensions, part quantities, mating surfaces, supports and mesh integrity before printing. Physical fit, printing and operation have not been tested. Hardware and electronics are not supplied. ORIGINAL MESHOPIA PRESENTATION MESHOPIA created the studio visualization locally in Blender from the actual supplied meshes, with original materials, lighting, camera and background. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Modular Slot-Car Starting-Light Gantry — 5 STL Designs

A modular starting-light gantry kit with truss bases, middle sections, corner sections, an alternate truss section and a light-housing layout. The cover repeats and visually aligns the actual supplied truss meshes and displays one of the two connected five-column light-housing strips in the source light file. No illuminated lenses or working electronics are depicted or included. PACKAGE CONTENTS The complete ZIP includes all five unique supplied STL files with new English filenames and an English source-label guide. Original mesh geometry and coordinates are preserved. The separate viewer STL is one source design, not the entire assembled scene. ASSEMBLY AND PRINT PREPARATION The cover uses translated, rotated and repeated copies of supplied meshes to illustrate an assembly. Inspect scale, dimensions, part quantities, mating surfaces, supports and mesh integrity before printing. Physical fit, printing and operation have not been tested. Hardware and electronics are not supplied. ORIGINAL MESHOPIA PRESENTATION MESHOPIA created the studio visualization locally in Blender from the actual supplied meshes, with original materials, lighting, camera and background. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Alfa Romeo GTA Junior 1300 — Multipart STL and OBJ Kit

Alfa Romeo GTA Junior 1300 two-door coupe model with a compact roof, defined window panels, sculpted hood and trunk, bumpers and supplied wheel design. This set contains eight source files across STL and OBJ formats, including alternative format versions of the body shell, floor, dashboard and wheel. PACKAGE CONTENTS All eight files have new English filenames, with an English source-label guide. The source OBJ named chasis contains body-shell geometry. STL bytes and OBJ vertex, normal, texture-coordinate and face records are preserved. References to missing source MTL libraries have been removed; no textures or MTL libraries were supplied. The viewer STL is the body shell. Download and extract the ZIP for all components. ASSEMBLY AND PRINT PREPARATION The cover combines the actual body, floor and dashboard meshes in their original coordinates and repeats the actual wheel mesh at four visually aligned wheel positions, mirroring the opposite side in the display scene. This is an illustrative assembly; downloadable geometry is unchanged. No separate axle, motor, seats, electronics or tested slot-car mechanism is supplied. Check source units, dimensions, repeated quantities, clearances, print orientation, supports and mesh integrity before printing. Physical fit and operation have not been tested. ORIGINAL MESHOPIA PRESENTATION MESHOPIA rendered the supplied meshes locally in Blender with original materials, studio lighting, camera and background. Window areas remain molded source panels, not invented transparent glass. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Dodge Charger General Lee — Foldable STL Kit

Dodge Charger foldable miniature from the General Lee / Dukes of Hazzard source set, with body, underbody, hood, wheel, window, bumper, bumper guard and separate decorative pattern layouts. The new cover uses a plain teal finish; optional source decorative parts are retained in the download. PACKAGE CONTENTS The complete ZIP contains 11 unique supplied STL files with new English filenames and an English source-label guide. Exact byte-identical duplicates are omitted. Original mesh geometry and coordinates are preserved. The viewer STL shows a source print layout in its unfolded printing pose. FOLDING AND PRINT PREPARATION The printable source layouts require folding and assembly after printing. Inspect hinge gaps, repeated quantities, dimensions, support needs and clearances before choosing print settings. Separate decorative elements and optional source variants remain separate designs. Physical printing, hinge motion, fit and operation have not been tested. Hardware and electronics are not included. ORIGINAL MESHOPIA PRESENTATION The hyperrealistic cover was generated locally in ComfyUI using the assembled reference for this exact source kit, with a new plain finish, view, lighting and studio background. It illustrates the folded model, not the flat STL printing layout. REFERENCE https://fab365.net/items/247 LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Tesla Cybertruck — Original Foldable STL Kit

Original foldable Tesla Cybertruck miniature set with a print-in-place body layout and a separate tonneau-cover layout. This is the supplied original two-file design, not a later Cybertruck kit version. PACKAGE CONTENTS The complete ZIP contains 2 unique supplied STL files with new English filenames and an English source-label guide. Exact byte-identical duplicates are omitted. Original mesh geometry and coordinates are preserved. The viewer STL shows a source print layout in its unfolded printing pose. FOLDING AND PRINT PREPARATION The printable source layouts require folding and assembly after printing. Inspect hinge gaps, repeated quantities, dimensions, support needs and clearances before choosing print settings. Separate decorative elements and optional source variants remain separate designs. Physical printing, hinge motion, fit and operation have not been tested. Hardware and electronics are not included. ORIGINAL MESHOPIA PRESENTATION The hyperrealistic cover was generated locally in ComfyUI using the assembled reference for this exact source kit, with a new plain finish, view, lighting and studio background. It illustrates the folded model, not the flat STL printing layout. REFERENCE https://fab365.net/items/174 LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

P-51 Mustang 1090 mm — Printable RC Airframe Kit

P-51 Mustang printable RC airframe from a separate source set labelled with a 1090 mm wingspan. The design has a streamlined fuselage, low wings, canopy area and conventional tail, with segmented components and alternate source part variants. PACKAGE CONTENTS The ZIP contains 28 unique original STL files for ailerons, fuselage sections, cockpit, nose, engine-section geometry, stabilizers, tail sections, servo mount and wing sections, with new English filenames and an English source-label guide. Exact byte-identical duplicates are supplied once. Original STL bytes and coordinates are unchanged. The viewer shows one source component in its original printing pose. Download the complete ZIP for all parts. DESIGN AND ASSEMBLY This is a separate source-labelled 1090 mm airframe design. It is not a confirmed interchangeable variant of the existing 3DLabPrint P-51D listing. Alternative files remain separate designs and should not all be assembled simultaneously. Select a consistent configuration, inspect dimensions, thin walls, hinge gaps, component fit, supports and print orientation, and supply appropriate purchased hardware and electronics. The 1090 mm designation comes from the source collection name; MESHOPIA has not independently verified the assembled wingspan. Motor, propeller, radio, battery, electronics and purchased hardware are not included. Printing, physical assembly, balance and flight readiness have not been tested. ORIGINAL MESHOPIA PRESENTATION The cover was generated locally in ComfyUI using this kit’s assembled source visualization, with a new teal finish, realistic printed surfaces, camera, lighting and neutral studio background. It illustrates the airframe, without an added propeller or landing gear. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar