Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

5 modelos etiquetados · Página 1 de 1

#antenna mount

Descubre modelos 3D etiquetados como antenna mount y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de GEPRC MARK5 DC DJI O3 Antenna Mount TPU

GEPRC MARK5 DC DJI O3 Antenna Mount TPU

GEPRC MARK5 DC DJI O3 Antenna Mount Purpose This model is a TPU antenna mount specifically designed for the GEPRC MARK5 DC equipped with the DJI O3 system. Practical Uses It serves as a dedicated housing to secure the DJI O3 antenna to the GEPRC MARK5 DC frame, providing a flexible mount to protect the antenna during flight operations. Included Parts - dij o3 antena.stl Printing and Assembly Guidance This model is intended to be printed in TPU (Thermoplastic Polyurethane) to utilize the material's flexibility and impact resistance for antenna mounting.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Spektrum DX6i Antenna Mount

Spektrum DX6i Antenna Mount

Spektrum DX6i Antenna Mount Purpose This model is designed as an internal antenna mount specifically for the Spektrum DX6i radio transmitter. Practical Uses It serves as a replacement or modification component to secure the antenna within the internal housing of the DX6i device. Included Parts - DX6i Antenna Neck v2.stl Printing and Assembly Guidance No specific printing parameters or assembly instructions are provided in the source documentation.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Antenna Mount GPS VTX ELRS HGLRC MY5

Antenna Mount GPS VTX ELRS HGLRC MY5

Antenna Mount GPS VTX ELRS HGLRC MY5 Purpose This model is designed as a multi-purpose antenna mount intended for FPV drone configurations. It provides dedicated mounting points for GPS modules, Video Transmitters (VTX), and ExpressLRS (ELRS) antennas. Practical Uses It is used to secure essential electronic components and antennas on an RC aircraft, specifically compatible with HGLRC MY5 setups. The design supports various FPV systems including DJI and Walksnail. Included Parts The digital file provided is a .3mf file named tpumount.3mf. Printing and Assembly Guidance The author specifies that the material used for this mount is TPU (Thermoplastic Polyurethane).

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de R9M slim+ antenna mount

R9M slim+ antenna mount

R9M slim+ antenna mount Purpose This model is designed as an antenna mount specifically for the Frsky R9M slim+ receiver. Practical Uses It is intended to be glued to a plane to secure the receiver's antenna. The design utilizes friction to hold the antenna in place, meaning no glue is required for the antenna itself. Included Parts - antana_mount.STL Assembly Guidance The mount should be glued to the aircraft. The antenna is held within the mount via friction alone.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Spektrum AR637T Receiver Holder with Antenna Mount

Spektrum AR637T Receiver Holder with Antenna Mount

Purpose This is a slip-in mount designed for the Spektrum AR637T receiver. It allows dual antennas to be routed through one of four holes each to achieve a required 90-degree angle between them. Practical Uses The holes are sized for PTFE tubing. The author suggests that adding 0.2 mm to the tubing diameter when adjusting hole sizes provides a good fit. Included Parts - Spektrum AR637T RC Rcvr Antenna Mount-AntennaMountBody.stl - Spektrum AR637T RC Rcvr Antenna Mount.fcstd Printing and Assembly Guidance The author printed this using white ASA on a Bambu X1C with BambuStudio's 0.16 Optimal setting and normal support. The model should be placed with the hole end down on the build plate. Note that cleaning support material from the holes may take a few minutes.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar