4 modelos etiquetados

#3MF

Descubre modelos 3D etiquetados como 3MF y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Circular-Base Display Stand for 1:10 RC Crawlers - STL and 3MF

Support an RC crawler on a dedicated stand for display or workbench access. The assembled reference shows a circular base, a central upright with reinforcing fins and an upper cross frame with two broad shaped supports. The source folder labels the project for 1:10 RGT crawlers and describes it as height adjustable. Specific vehicle fit and adjustment range have not been verified by MESHOPIA. Three files are included: a lower stand part in STL, an upper stand part in STL, and a 3MF stand project. They have been renamed in English while retaining their original contents. Inspect the upper and lower interfaces before assembly and review the 3MF layout in compatible slicing software. The 3MF is an additional project file, rather than a third separately named STL component. Compare the support shape and spacing with your crawler chassis. Choose print material, orientation, walls and supports after checking the model in your slicer. No physical stability test, rated load capacity or tested print profile is documented here. The vehicle and any additional hardware are not supplied. The new MESHOPIA cover is a local visualization based on the assembled stand reference. A different color, camera view, studio background and lighting illustrate a possible printed appearance.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Open-Lattice Service Ramp for 1:18 RC Cars - STL and 3MF

Create a small service or display ramp for an RC car. The source photograph shows two matching ramps side by side, each with a sloping top, rectangular tread openings and open rectangular side supports. The source folder and filenames label this design for 1:18 RC vehicles. The download includes one STL file and one 3MF file, supplied as alternative formats. These are two files, rather than evidence of two distinct ramp variants. Print additional copies as required for a pair. Both have English filenames and retain their original geometry and file contents. Check the ramp width, incline and wheel contact area in your slicer against the intended vehicle before printing. Compatibility, load capacity and print settings have not been physically tested by MESHOPIA. No vehicle, assembly hardware or separate instructions are included in the extracted package. Select material, orientation, walls and supports after inspecting the model. The new cover is a studio render of the actual supplied STL, reoriented for an upright service-ramp presentation and given a different finish, lighting, camera view and background. It shows one ramp; print another copy if you need a pair. The original digital model files are preserved.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Six-Wheel Moon Rover Chassis, Rocker Arms and Paddle Wheel - Ten STL Files and 3MF

Printable mechanical components from an RC Moon Rover source project. The supplied geometry includes two short bogie arms, two longer rocker arms, a narrow chassis link, a perforated upper platform, a lower platform with mounting features, two small connecting links and one wheel design with six broad spokes and chunky paddle-like tread blocks. The mirrored and standard arm files remain separate. The download contains ten unchanged original STL files and one unchanged original 3MF project, all renamed in English. One wheel mesh is supplied; repeat quantities must be determined for your build. The 3MF preserves its original project layout and does not constitute a validated assembly guide. No scale or universal hardware compatibility is established. The new cover presents an illustrative six-wheel arrangement constructed from the actual STL geometry. The wheel design is repeated six times and the rocker and bogie arms are positioned using their visible pivot and mounting features. The two body platforms are arranged above the wheel assemblies; the narrow link and two small connecting parts are displayed separately alongside. Blue and sand-colored structural parts, dark wheels, a changed camera angle and a new workshop setting distinguish the image from the source photo. This visual arrangement has not been mechanically validated. Motors, electronics, batteries, wiring, metal shafts and fasteners are not included. Check wheel attachment, motor brackets, pivot clearances, platform connections, link lengths and required hardware before fabrication. Assembly quantities and a tested printing profile are not supplied. MESHOPIA has not tested printing, fit, strength, suspension movement or powered operation. The cover renders the actual meshes and shadows in Blender and composites them over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Shelby GT500-Style RC Body Sections, Grille, Supports and Tail-Light Inserts - Four 3MF Files

Printable body components from a 1967 Shelby GT500 body source project for OpenRC F1. The body project contains three lengthwise shell sections and a separate roof/cabin section. Their retained source coordinates form a long coupe-style body with wheel arches, molded door details, hood openings, front lamp openings and rear body features. Additional projects contain a perforated grille insert, three support or mounting pieces and two rear-light insert meshes. Several projects contain multiple printable meshes. Four unchanged original 3MF files are included with descriptive English filenames. The OpenRC F1 and Shelby references identify the supplied source project, rather than independently verified fit or official manufacturer affiliation. A verified scale and hardware configuration are not supplied. The original accessory filenames describe mockups, so these components should be treated as untested source designs. The new cover uses the four actual body meshes in their retained source relationship to illustrate the assembled shell. The grille, supports and rear-light inserts are displayed separately alongside. Blue body sections and sand-colored accessories, a changed angle and a workshop background distinguish the presentation from the source image. The download geometry is unchanged; no wheels, chassis or other components have been invented for the cover. This is a body-component set. Motors, servos, electronics, batteries, wiring, glazing, functioning lamps, wheels, chassis and fastening hardware are not included as physical supplies. Check shell joints, mount positions, wheelbase, tire clearances, grille seating and light-insert alignment against the intended build before fabrication. Tested assembly instructions and printing settings are not supplied. MESHOPIA has not tested printing, fit or RC operation. The cover renders the actual meshes and shadows in Blender over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar