Model information
Description
Two Bladed Propeller Snap Fit
Purpose
This model is a two-bladed propeller originally designed for the VOLANTEXRC RC Plane - P51 Mustang Ready to Fly. It is intended to fit other brands, such as LEAMBE.
Practical Uses
It serves as a replacement or custom part for RC planes and similar electronics-based hobbyist aircraft.
Included Parts
- Two Bladed Propeller.stl
Printing and Assembly Guidance
For optimal performance, the author recommends using light filaments such as PLA, ABS, or PETG, noting that other materials may increase drag. For best use, the bottom of the propeller should be sanded.
Printing settings recommended by the author include:
- Layer height: 0.16mm or lower
- Infill: 0%
- Wall thickness: 0.8mm (2 lines)
- Support and adhesion should be used during the printing process.
Original text by the author on Printables
<p>I would recommend using a light filliment such as PLA ABS and PETG not any others for it may increase drag. Use suports and adhesion, make sure to sand the bottom of the propeller for best use, print at 0% infill and 0.8mm wall thickness 2 lines, and print at 0.16mm or lower layer hight.</p><p>Happy Printing.</p>
Questions and contributions