FPV Upgrade for ZOHD Altus – Magnetic Nose for Walksnail Moonlight
FPV Upgrade for ZOHD Altus – Magnetic Nose for Walksnail Moonlight Purpose This 3D-printed nose is designed specifically for the ZOHD Altus FPV aircraft. It serves as a dedicated mount for the Walksnail Moonlight unit (camera and VTX) and attaches to the fuselage using magnets, eliminating the need for screws or glue. Practical Uses Providing an aerodynamic and closed front to protect electronics, the design includes built-in ventilation and antenna holes suitable for dual antenna setups. It is engineered to allow easy access to the SD-Card and the bind button. Included Parts - 3D model: Zohd Altus Nose Walksnail.obj Printing and Assembly Guidance For printing, the author suggests using any material and any layer height. Supports are not required. The recommended print orientation is with the nose facing down. The author reports a weight of 43 grams when printed in solid PLA and 18 grams in LW-PLA. Assembly requires neodymium magnets. While the parts list specifies 8× Ø6 × 3 mm magnets, the author recommends using 4× Ø6 mm × 3 mm magnets for attachment to the fuselage.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar