3 modelos etiquetados

#workbench accessory

Descubre modelos 3D etiquetados como workbench accessory y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Compartment Organizer Box for RC Parts - Original and V2 3MF

Organize small RC hardware in a compartmented storage box. The supplied reference shows an open rectangular tray with rows of separate compartments and a matching lid beside it. The screws, springs, nuts and other small items in that photograph illustrate its use and are not included in this digital download. Two 3MF project files are supplied: the original Complete Parts Box and a version labeled V2. They have been renamed in English while preserving their original contents. Keep the projects distinct when comparing their components and layouts; identical dimensions, hinge details and compatibility between revisions have not been verified. The lid in the reference carries an Axial graphic, so inspect the supplied projects for any included lettering or decorative elements before printing. Open each 3MF in compatible slicing software and inspect its parts, layout and any embedded settings. Printer-specific presets should be reviewed for your own machine. No physical closure test, load rating, measured compartment dimensions or tested print profile is documented by MESHOPIA. Hardware and stored RC parts are not supplied. The MESHOPIA cover is a studio render of actual meshes from the original 3MF project. The body and two supplied tray copies are positioned as a visual assembly, with the lid beside it, its inner face upward, and two supplied clips shown separately. No mesh shape was altered and no stored hardware was added. Component positioning illustrates a possible assembly; physical fit and closure have not been verified. An additional STL of the original box base is included for a compatible 3D preview. It was exported from the original 3MF mesh without changing its geometry. This STL contains only the base; use the 3MF projects for the trays, lid, clips and other project components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Textured Service Ramp for 1:10 RC Drift Cars - STL

Add a small raised wheel support to an RC display or workbench setup. The source photograph shows a pair of matching ramps with straight inclined approaches, a repeating circular surface pattern and an elevated flat section supported by an open frame. The source folder and filename label the design for 1:10 RC drift cars. One STL file is included, renamed 01-textured-rc-service-ramp.stl in English without altering the printable geometry. The two physical ramps in the reference show a possible paired setup; the file inventory does not establish two separately supplied variants. Inspect the STL layout and print additional copies as needed. No car or other track equipment is included. Compare the ramp width, surface features and elevated support with your intended tires and vehicle. Wheel fit, load capacity, traction and print settings have not been physically tested by MESHOPIA. Select material, orientation, walls and supports after reviewing the model in your slicer. No separate hardware or assembly guide is documented in this extracted set. The MESHOPIA cover is a studio render of the actual STL geometry, showing one ramp with its circular surface features, recessed rear platform and open supports. The supplied geometry is unchanged; the new finish, lighting and background are part of the visualization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

RC Shock Service Stand with Storage Trays and Alternative Hole Plate - 3MF and STL

Organize RC shock servicing with a raised support plate and lower storage trays. The inspected stand has two open triangular side frames, a top plate with four circular shock openings, a lower shelf, one long open tray and one divided tray for small items. A separately supplied STL plate provides two rows of four smaller openings and end tabs for an alternative top arrangement. Three unchanged files are included: the original service-station 3MF, a second 3MF labeled Bambu Studio multicolor, and the separate alternative hole-plate STL. The first 3MF contains VL, VR, HL and HR position lettering; the inspected multicolor-labeled layout omits that lettering. Both source layouts are preserved. The new cover shows the assembled geometry from the second layout in blue, with the alternative plate displayed separately in sand color. It does not imply that both top plates must be installed together. Check your shock-body diameter, top-plate seating, frame connections and tray clearances before printing. The source illustration labels opening sizes, but MESHOPIA has not verified those dimensions, shock compatibility or a printing profile. Shock absorbers, oil, screws, tools and other servicing equipment are not included. No verified vehicle scale or service-load rating was supplied. MESHOPIA has not tested fit, assembly, solvent resistance or strength. The cover renders the actual source geometry and shadows in Blender, then composites them over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar