Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

8 tagged models · Page 1 of 1

#suspensión

Discover 3D models tagged suspensión and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Anclaje de tirantes para crawler Hornet CyberBrick

Suspension link mounts for Hornet CyberBrick crawler

Anchor pieces for the suspension rods of the Hornet crawler based on CyberBrick. The author refers to them as "STRONG," but the available documentation does not provide tests to quantify an improvement in strength. They are presented as a mounting variant, not as a certified reinforcement. Preparation, compatibility, and printing Identify the position of each piece and compare holes and supports with the chassis. Check that the ball joints or rods travel through their full angle without touching the anchors. Layer orientation must be studied based on the stresses of the assembly. No material or infill percentage is documented; first validate fit and movement in a static state.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Juego de tirantes elevados para crawler Hornet CyberBrick

High-clearance link set for Hornet CyberBrick crawler

These high clearance links are designed for The Hornet, a competition-style CyberBrick crawler. Practical uses include increasing ground clearance for the crawler during competition-style driving. Included files: - high clearance link back up left.stl - high clearance link back up right.stl - high clearance link front up left.stl - high clearance link front up right.stl - high clearance link front down2x.stl - high clearance link back down 2x.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR - Suspension Spring Holder

ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR - Suspension Spring Holder

Purpose This model serves as a replacement for the original bottom spring holder located in the suspension of the ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR. Practical Uses It is intended to replace worn or damaged suspension components on the specified ABSIMA truck model. Included Parts - Stossdaempfer-Teller-Dämperteller.stl Printing/Assembly Guidance The author suggests printing this part in PETG for increased durability. Using supports on the build plate was noted to work best.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de MJX HYPER GO RC model steering arm and suspensions hooks

MJX HYPER GO RC model steering arm and suspensions hooks

MJX HYPER GO RC model steering arm and suspensions hooks Purpose These hooks are designed specifically as replacement parts for the MJX HYPER GO RX RC car. Practical Uses They serve as replacement steering arm and suspension hooks for the MJX HYPER GO model. Included Parts - MJX HYPER GO steering arm hook - MJX HYPER GO suspension hook Printing and Assembly Guidance The author recommends printing the hooks in a horizontal orientation for best results. Based on the author's reported settings using eSun PETG-CF filament, the following parameters were used: - Infill: 100% with concentric patterns - Speed: 50mm/s constant speed for all printing fields - Temperature: 255°C nozzle / 70°C bed Users may refer to the provided QiDi studio setting screenshots for additional configuration details.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Tamiya Neo Scorcher shock spacer

Tamiya Neo Scorcher shock spacer

Tamiya Neo Scorcher shock spacer Purpose The author designed these basic spacers to increase the stiffness of the shocks. This modification is intended to make the car sit higher, making it more suited for off-road runs. Practical Uses These spacers are used to adjust the suspension height and hardness on a Tamiya Neo Scorcher, specifically optimized for off-road driving conditions. Included Parts - tamiya neo scorcher shock spacers rear.stl - tamiya neo scorcher shock spacers front.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de TAMIYA CR-01 Suspension mount

TAMIYA CR-01 Suspension mount

RC:TAMIYA CR-01 Suspension mount Purpose This model is a suspension mount designed for use with the TAMIYA CR-01 RC crawler. Practical Uses It serves as a component for the vehicle's suspension system. Users should note that dimensions may vary slightly depending on the printing temperature used, and post-print processing may be necessary for a proper fit. Included Parts - RC TAMIYA CR01_COIL_BK.stl Printing and Assembly Guidance For optimal results, the following print settings are recommended: - Layer height: 0.12mm - Infill density: 50% - Support: Required - Build plate adhesion: Raft recommended

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Suspension for RC models

Suspension for RC models

Purpose This suspension system is designed for RC models to adjust ride height and manage road surface roughness. Practical Uses It is used to improve the handling of RC vehicles when navigating irregular terrain. Included Parts - Suspension Up model.stl - Suspension Down Model.stl - Suspension spring.stl - Suspension All.stl Printing and Assembly Guidance Supports should only be applied from the base during printing. For assembly, insert M3 bolts into the mounting holes and compress the spring firmly to activate the mechanism. Once the bolts are removed, lubricate the stem with any lubricant and cycle the mechanism several times.

Technology
Sin probar
material
—
Difficulty
Sin especificar